From patchwork Fri Apr 5 23:45:14 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?q?Ond=C5=99ej_Jirman?= X-Patchwork-Id: 1078953 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming-netdev@ozlabs.org Delivered-To: patchwork-incoming-netdev@ozlabs.org Authentication-Results: ozlabs.org; spf=none (mailfrom) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=netdev-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=reject dis=none) header.from=megous.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=megous.com header.i=@megous.com header.b="Lyf6ZQIm"; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 44bc6s34Rfz9sPw for ; Sat, 6 Apr 2019 10:52:05 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726756AbfDEXwE (ORCPT ); Fri, 5 Apr 2019 19:52:04 -0400 Received: from vps.xff.cz ([195.181.215.36]:53658 "EHLO vps.xff.cz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726588AbfDEXvt (ORCPT ); Fri, 5 Apr 2019 19:51:49 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=megous.com; s=mail; t=1554507926; bh=vFUAj+o/8uZzgqHvYg4IDlf8NAxVVLEt0H3MM73Czig=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=Lyf6ZQImDKUXGeeVjf2ZaV1pTfcR0tqf41GNnp9VIo/d9o4S4RIV0V+5NL4WdOBzq BEtFUf7N1tLpQ7dk45TWWarTdvXoBu82cU/mvMUyN0TepJrv1O8+YNSxPIZV6XWiXr 1ixfDxhFUxubaylLEmsNHER5o01+VeFCogdbYMjU= From: megous@megous.com To: linux-sunxi@googlegroups.com, Maxime Ripard , Chen-Yu Tsai , Rob Herring , Linus Walleij Cc: Ondrej Jirman , David Airlie , Daniel Vetter , Mark Rutland , Giuseppe Cavallaro , Alexandre Torgue , Jose Abreu , "David S. Miller" , Maxime Coquelin , Arend van Spriel , Franky Lin , Hante Meuleman , Chi-Hsien Lin , Wright Feng , Kalle Valo , Naveen Gupta , dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-wireless@vger.kernel.org, brcm80211-dev-list.pdl@broadcom.com, brcm80211-dev-list@cypress.com, linux-gpio@vger.kernel.org Subject: [PATCH 12/12] arm64: dts: allwinner: orange-pi-3: Enable WiFi Date: Sat, 6 Apr 2019 01:45:14 +0200 Message-Id: <20190405234514.6183-13-megous@megous.com> In-Reply-To: <20190405234514.6183-1-megous@megous.com> References: <20190405234514.6183-1-megous@megous.com> MIME-Version: 1.0 Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org From: Ondrej Jirman Orange Pi 3 has AP6256 WiFi/BT module. WiFi part of the module is called bcm43356 and can be used with the brcmfmac driver. The module is powered by the two always on regulators (not AXP805). WiFi uses a PG port with 1.8V voltage level signals. SoC needs to be configured so that it sets up an 1.8V input bias on this port. This is done by the pio driver by reading the vcc-pg-supply voltage. You'll need a fw_bcm43456c5_ag.bin firmware file and nvram.txt configuration that can be found in the Xulongs's repository for H6: https://github.com/orangepi-xunlong/OrangePiH6_external/tree/master/ap6256 Mainline brcmfmac driver expects the firmware and nvram at the following paths relative to the firmware directory: brcm/brcmfmac43456-sdio.bin brcm/brcmfmac43456-sdio.txt Signed-off-by: Ondrej Jirman --- .../dts/allwinner/sun50i-h6-orangepi-3.dts | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index 5270142527f5..6a201829bb62 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -66,6 +66,26 @@ regulator-always-on; }; + reg_vcc33_wifi: vcc33-wifi { + /* Always on 3.3V regulator for WiFi and BT */ + compatible = "regulator-fixed"; + regulator-name = "vcc33-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_vcc5v>; + }; + + reg_vcc_wifi_io: vcc-wifi-io { + /* Always on 1.8V/300mA regulator for WiFi and BT IO */ + compatible = "regulator-fixed"; + regulator-name = "vcc-wifi-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <®_vcc33_wifi>; + }; + /* * The board uses 2.5V RGMII signalling. Power sequence * to enable the phy is to enable GMAC-2V5 and GMAC-3V3 (aldo2) @@ -86,6 +106,14 @@ */ vin-supply = <®_aldo2>; /* GMAC-3V3 */ }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc 1>; + clock-names = "ext_clock"; + reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ + post-power-on-delay-ms = <200>; + }; }; &cpu0 { @@ -146,6 +174,25 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_vcc33_wifi>; + vqmmc-supply = <®_vcc_wifi_io>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcm: sdio-wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */ + interrupt-names = "host-wake"; + }; +}; + &ohci0 { status = "okay"; }; @@ -157,6 +204,7 @@ &pio { vcc-pc-supply = <®_bldo2>; vcc-pd-supply = <®_cldo1>; + vcc-pg-supply = <®_vcc_wifi_io>; }; &r_i2c {