diff mbox series

[lora-next,06/11] net: lora: sx130x: add detail to TODO in setup

Message ID 20190128161306.27805-7-ben.whitten@lairdtech.com
State Not Applicable
Delegated to: David Miller
Headers show
Series net: lora: Get SX130x to transmit lora packets | expand

Commit Message

Ben Whitten Jan. 28, 2019, 4:13 p.m. UTC 
From: Ben Whitten <ben.whitten@gmail.com>

Setup requires a more steps to be complete, call these out specifically
so they are not missed.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
---
 drivers/net/lora/sx130x.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/lora/sx130x.c b/drivers/net/lora/sx130x.c
index 18acfc8e934d..88932fbbb598 100644
--- a/drivers/net/lora/sx130x.c
+++ b/drivers/net/lora/sx130x.c
@@ -688,7 +688,17 @@  static int sx130x_loradev_open(struct net_device *netdev)
 	if (ret)
 		goto err_calibrate;
 
-	/* TODO */
+	/* TODO Load constant adjustments, patches */
+
+	/* TODO Frequency time drift */
+
+	/* TODO Configure lora multi demods, bitfield of active */
+
+	/* TODO Load concentrator multi channel frequencies */
+
+	/* TODO enable the correlator on enabled frequencies */
+
+	/* TODO PPM, and modem enable */
 
 	ret = sx130x_load_all_firmware(priv);
 	if (ret)