diff mbox series

[net-next] net: hns3: Config NIC port speed same as that of optical module

Message ID 20181126184300.24964-1-salil.mehta@huawei.com
State Accepted, archived
Delegated to: David Miller
Headers show
Series [net-next] net: hns3: Config NIC port speed same as that of optical module | expand

Commit Message

Salil Mehta Nov. 26, 2018, 6:43 p.m. UTC
From: Peng Li <lipeng321@huawei.com>

Port 0/1 of HiP08 supports 10G and 25G. This patch adds a
change to configure NIC port speed same as that of  optical
module(SFP/QFSP). Driver gets the optical module speed and
sets NIC port speed accordingly.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 23 +++---
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c    | 84 ++++++++++------------
 .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h    |  2 +
 3 files changed, 49 insertions(+), 60 deletions(-)

Comments

David Miller Nov. 28, 2018, 12:33 a.m. UTC | #1
From: Salil Mehta <salil.mehta@huawei.com>
Date: Mon, 26 Nov 2018 18:43:00 +0000

> From: Peng Li <lipeng321@huawei.com>
> 
> Port 0/1 of HiP08 supports 10G and 25G. This patch adds a
> change to configure NIC port speed same as that of  optical
> module(SFP/QFSP). Driver gets the optical module speed and
> sets NIC port speed accordingly.
> 
> Signed-off-by: Peng Li <lipeng321@huawei.com>
> Signed-off-by: Salil Mehta <salil.mehta@huawei.com>

Applied.
dann frazier Jan. 1, 2019, 1:22 a.m. UTC | #2
On Mon, Nov 26, 2018 at 06:43:00PM +0000, Salil Mehta wrote:
> From: Peng Li <lipeng321@huawei.com>
> 
> Port 0/1 of HiP08 supports 10G and 25G. This patch adds a
> change to configure NIC port speed same as that of  optical
> module(SFP/QFSP). Driver gets the optical module speed and
> sets NIC port speed accordingly.

Hi,

I'm getting the following errors in dmesg about every 1s on a D06:

[  766.761823] hns3 0000:bd:00.0: get sfp speed failed -5
[  767.785823] hns3 0000:bd:00.0: get sfp speed failed -5
[  768.809820] hns3 0000:bd:00.0: get sfp speed failed -5
[  769.833818] hns3 0000:bd:00.0: get sfp speed failed -5

Reverting this patch fixes the issue.

 -dann
lipeng (Y) Jan. 2, 2019, 12:45 p.m. UTC | #3
On 2019/1/1 9:22, dann frazier wrote:
> On Mon, Nov 26, 2018 at 06:43:00PM +0000, Salil Mehta wrote:
>> From: Peng Li <lipeng321@huawei.com>
>>
>> Port 0/1 of HiP08 supports 10G and 25G. This patch adds a
>> change to configure NIC port speed same as that of  optical
>> module(SFP/QFSP). Driver gets the optical module speed and
>> sets NIC port speed accordingly.
> Hi,
>
> I'm getting the following errors in dmesg about every 1s on a D06:
>
> [  766.761823] hns3 0000:bd:00.0: get sfp speed failed -5
> [  767.785823] hns3 0000:bd:00.0: get sfp speed failed -5
> [  768.809820] hns3 0000:bd:00.0: get sfp speed failed -5
> [  769.833818] hns3 0000:bd:00.0: get sfp speed failed -5
>
> Reverting this patch fixes the issue.
>
>   -dann
Hi,dann,

Thanks for your test and report.

This patch needs to match new fireware verison ,
And  it  does some work to  be Compatible with older versions.

Can you show me more information?
can you  use "ethtool -i ethx" to get the fireware version ,
and shows me  some other message about hns3?

Thanks

>
> .
>
dann frazier Jan. 3, 2019, 5:41 p.m. UTC | #4
On Wed, Jan 02, 2019 at 08:45:36PM +0800, lipeng (Y) wrote:
> 
> 
> On 2019/1/1 9:22, dann frazier wrote:
> > On Mon, Nov 26, 2018 at 06:43:00PM +0000, Salil Mehta wrote:
> > > From: Peng Li <lipeng321@huawei.com>
> > > 
> > > Port 0/1 of HiP08 supports 10G and 25G. This patch adds a
> > > change to configure NIC port speed same as that of  optical
> > > module(SFP/QFSP). Driver gets the optical module speed and
> > > sets NIC port speed accordingly.
> > Hi,
> > 
> > I'm getting the following errors in dmesg about every 1s on a D06:
> > 
> > [  766.761823] hns3 0000:bd:00.0: get sfp speed failed -5
> > [  767.785823] hns3 0000:bd:00.0: get sfp speed failed -5
> > [  768.809820] hns3 0000:bd:00.0: get sfp speed failed -5
> > [  769.833818] hns3 0000:bd:00.0: get sfp speed failed -5
> > 
> > Reverting this patch fixes the issue.
> > 
> >   -dann
> Hi,dann,
> 
> Thanks for your test and report.
> 
> This patch needs to match new fireware verison ,
> And  it  does some work to  be Compatible with older versions.

I did upgrade to the latest available firmware (20181213-b20), but the
problem persisted. Maybe the necessary firmware is not yet released?

> Can you show me more information?
> can you  use "ethtool -i ethx" to get the fireware version ,
> and shows me  some other message about hns3?

Sure: 

$ sudo ethtool -i enp125s0f2
driver: hns3
version: 4.20.0+ SMP mod_unload aarch64
firmware-version: 0xb0311019
expansion-rom-version: 
bus-info: 0000:7d:00.2
supports-statistics: yes
supports-test: yes
supports-eeprom-access: no
supports-register-dump: yes
supports-priv-flags: no

  -dann
diff mbox series

Patch

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
index 2b90410..e1805b9 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
@@ -90,7 +90,6 @@  enum hclge_opcode_type {
 	/* MAC command */
 	HCLGE_OPC_CONFIG_MAC_MODE	= 0x0301,
 	HCLGE_OPC_CONFIG_AN_MODE	= 0x0304,
-	HCLGE_OPC_QUERY_AN_RESULT	= 0x0306,
 	HCLGE_OPC_QUERY_LINK_STATUS	= 0x0307,
 	HCLGE_OPC_CONFIG_MAX_FRM_SIZE	= 0x0308,
 	HCLGE_OPC_CONFIG_SPEED_DUP	= 0x0309,
@@ -212,6 +211,9 @@  enum hclge_opcode_type {
 	/* Led command */
 	HCLGE_OPC_LED_STATUS_CFG	= 0xB000,
 
+	/* SFP command */
+	HCLGE_OPC_SFP_GET_SPEED		= 0x7104,
+
 	/* Error INT commands */
 	HCLGE_TM_SCH_ECC_INT_EN		= 0x0829,
 	HCLGE_TM_SCH_ECC_ERR_RINT_CMD	= 0x082d,
@@ -544,20 +546,6 @@  struct hclge_config_mac_speed_dup_cmd {
 	u8 rsv[22];
 };
 
-#define HCLGE_QUERY_SPEED_S		3
-#define HCLGE_QUERY_AN_B		0
-#define HCLGE_QUERY_DUPLEX_B		2
-
-#define HCLGE_QUERY_SPEED_M		GENMASK(4, 0)
-#define HCLGE_QUERY_AN_M		BIT(HCLGE_QUERY_AN_B)
-#define HCLGE_QUERY_DUPLEX_M		BIT(HCLGE_QUERY_DUPLEX_B)
-
-struct hclge_query_an_speed_dup_cmd {
-	u8 an_syn_dup_speed;
-	u8 pause;
-	u8 rsv[23];
-};
-
 #define HCLGE_RING_ID_MASK		GENMASK(9, 0)
 #define HCLGE_TQP_ENABLE_B		0
 
@@ -574,6 +562,11 @@  struct hclge_config_auto_neg_cmd {
 	u8      rsv[20];
 };
 
+struct hclge_sfp_speed_cmd {
+	__le32	sfp_speed;
+	u32	rsv[5];
+};
+
 #define HCLGE_MAC_UPLINK_PORT		0x100
 
 struct hclge_config_max_frm_size_cmd {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 696cb53..1c8cf84 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1896,37 +1896,6 @@  static int hclge_cfg_mac_speed_dup_h(struct hnae3_handle *handle, int speed,
 	return hclge_cfg_mac_speed_dup(hdev, speed, duplex);
 }
 
-static int hclge_query_mac_an_speed_dup(struct hclge_dev *hdev, int *speed,
-					u8 *duplex)
-{
-	struct hclge_query_an_speed_dup_cmd *req;
-	struct hclge_desc desc;
-	int speed_tmp;
-	int ret;
-
-	req = (struct hclge_query_an_speed_dup_cmd *)desc.data;
-
-	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_QUERY_AN_RESULT, true);
-	ret = hclge_cmd_send(&hdev->hw, &desc, 1);
-	if (ret) {
-		dev_err(&hdev->pdev->dev,
-			"mac speed/autoneg/duplex query cmd failed %d\n",
-			ret);
-		return ret;
-	}
-
-	*duplex = hnae3_get_bit(req->an_syn_dup_speed, HCLGE_QUERY_DUPLEX_B);
-	speed_tmp = hnae3_get_field(req->an_syn_dup_speed, HCLGE_QUERY_SPEED_M,
-				    HCLGE_QUERY_SPEED_S);
-
-	ret = hclge_parse_speed(speed_tmp, speed);
-	if (ret)
-		dev_err(&hdev->pdev->dev,
-			"could not parse speed(=%d), %d\n", speed_tmp, ret);
-
-	return ret;
-}
-
 static int hclge_set_autoneg_en(struct hclge_dev *hdev, bool enable)
 {
 	struct hclge_config_auto_neg_cmd *req;
@@ -1973,6 +1942,7 @@  static int hclge_mac_init(struct hclge_dev *hdev)
 	struct hclge_mac *mac = &hdev->hw.mac;
 	int ret;
 
+	hdev->support_sfp_query = true;
 	hdev->hw.mac.duplex = HCLGE_MAC_FULL;
 	ret = hclge_cfg_mac_speed_dup_hw(hdev, hdev->hw.mac.speed,
 					 hdev->hw.mac.duplex);
@@ -2082,34 +2052,58 @@  static void hclge_update_link_status(struct hclge_dev *hdev)
 	}
 }
 
+static int hclge_get_sfp_speed(struct hclge_dev *hdev, u32 *speed)
+{
+	struct hclge_sfp_speed_cmd *resp = NULL;
+	struct hclge_desc desc;
+	int ret;
+
+	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_SFP_GET_SPEED, true);
+	resp = (struct hclge_sfp_speed_cmd *)desc.data;
+	ret = hclge_cmd_send(&hdev->hw, &desc, 1);
+	if (ret == -EOPNOTSUPP) {
+		dev_warn(&hdev->pdev->dev,
+			 "IMP do not support get SFP speed %d\n", ret);
+		return ret;
+	} else if (ret) {
+		dev_err(&hdev->pdev->dev, "get sfp speed failed %d\n", ret);
+		return ret;
+	}
+
+	*speed = resp->sfp_speed;
+
+	return 0;
+}
+
 static int hclge_update_speed_duplex(struct hclge_dev *hdev)
 {
 	struct hclge_mac mac = hdev->hw.mac;
-	u8 duplex;
 	int speed;
 	int ret;
 
-	/* get the speed and duplex as autoneg'result from mac cmd when phy
+	/* get the speed from SFP cmd when phy
 	 * doesn't exit.
 	 */
-	if (mac.phydev || !mac.autoneg)
+	if (mac.phydev)
 		return 0;
 
-	ret = hclge_query_mac_an_speed_dup(hdev, &speed, &duplex);
-	if (ret) {
-		dev_err(&hdev->pdev->dev,
-			"mac autoneg/speed/duplex query failed %d\n", ret);
-		return ret;
-	}
+	/* if IMP does not support get SFP/qSFP speed, return directly */
+	if (!hdev->support_sfp_query)
+		return 0;
 
-	ret = hclge_cfg_mac_speed_dup(hdev, speed, duplex);
-	if (ret) {
-		dev_err(&hdev->pdev->dev,
-			"mac speed/duplex config failed %d\n", ret);
+	ret = hclge_get_sfp_speed(hdev, &speed);
+	if (ret == -EOPNOTSUPP) {
+		hdev->support_sfp_query = false;
+		return ret;
+	} else if (ret) {
 		return ret;
 	}
 
-	return 0;
+	if (speed == HCLGE_MAC_SPEED_UNKNOWN)
+		return 0; /* do nothing if no SFP */
+
+	/* must config full duplex for SFP */
+	return hclge_cfg_mac_speed_dup(hdev, speed, HCLGE_MAC_FULL);
 }
 
 static int hclge_update_speed_duplex_h(struct hnae3_handle *handle)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index 4122ad1..0dd23a1 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -155,6 +155,7 @@  enum hclge_evt_cause {
 #define HCLGE_MPF_ENBALE 1
 
 enum HCLGE_MAC_SPEED {
+	HCLGE_MAC_SPEED_UNKNOWN = 0,		/* unknown */
 	HCLGE_MAC_SPEED_10M	= 10,		/* 10 Mbps */
 	HCLGE_MAC_SPEED_100M	= 100,		/* 100 Mbps */
 	HCLGE_MAC_SPEED_1G	= 1000,		/* 1000 Mbps   = 1 Gbps */
@@ -624,6 +625,7 @@  struct hclge_dev {
 	u8 hw_tc_map;
 	u8 tc_num_last_time;
 	enum hclge_fc_mode fc_mode_last_time;
+	u8 support_sfp_query;
 
 #define HCLGE_FLAG_TC_BASE_SCH_MODE		1
 #define HCLGE_FLAG_VNET_BASE_SCH_MODE		2