diff mbox series

[v3,12/22] dpaa_eth: base dma mappings on the fman rx port

Message ID 20181010120737.30300-10-laurentiu.tudor@nxp.com
State Not Applicable, archived
Delegated to: David Miller
Headers show
Series SMMU enablement for NXP LS1043A and LS1046A | expand

Commit Message

Laurentiu Tudor Oct. 10, 2018, 12:07 p.m. UTC 
From: Laurentiu Tudor <laurentiu.tudor@nxp.com>

The dma transactions initiator is the rx fman port so that's the device
that the dma mappings should be done. Previously the mappings were done
through the MAC device which makes no sense because it's neither dma-able
nor connected in any way to smmu.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 1ca4cfb79961..0dc0267844ca 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2795,8 +2795,15 @@  static int dpaa_eth_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	mac_dev = dpaa_mac_dev_get(pdev);
+	if (IS_ERR(mac_dev)) {
+		dev_err(&pdev->dev, "dpaa_mac_dev_get() failed\n");
+		err = PTR_ERR(mac_dev);
+		goto probe_err;
+	}
+
 	/* device used for DMA mapping */
-	dev = pdev->dev.parent;
+	dev = fman_port_get_device(mac_dev->port[RX]);
 	err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(40));
 	if (err) {
 		dev_err(dev, "dma_coerce_mask_and_coherent() failed\n");
@@ -2821,13 +2828,6 @@  static int dpaa_eth_probe(struct platform_device *pdev)
 
 	priv->msg_enable = netif_msg_init(debug, DPAA_MSG_DEFAULT);
 
-	mac_dev = dpaa_mac_dev_get(pdev);
-	if (IS_ERR(mac_dev)) {
-		dev_err(dev, "dpaa_mac_dev_get() failed\n");
-		err = PTR_ERR(mac_dev);
-		goto free_netdev;
-	}
-
 	/* If fsl_fm_max_frm is set to a higher value than the all-common 1500,
 	 * we choose conservatively and let the user explicitly set a higher
 	 * MTU via ifconfig. Otherwise, the user may end up with different MTUs
@@ -2963,9 +2963,9 @@  static int dpaa_eth_probe(struct platform_device *pdev)
 	qman_release_cgrid(priv->cgr_data.cgr.cgrid);
 free_dpaa_bps:
 	dpaa_bps_free(priv);
-free_netdev:
 	dev_set_drvdata(dev, NULL);
 	free_netdev(net_dev);
+probe_err:
 
 	return err;
 }