diff mbox series

[v2,net-next,2/7] MIPS: lantiq: Do not enable IRQs in dma open

Message ID 20180901114535.9070-3-hauke@hauke-m.de
State Changes Requested, archived
Delegated to: David Miller
Headers show
Series Add support for Lantiq / Intel vrx200 network | expand

Commit Message

Hauke Mehrtens Sept. 1, 2018, 11:45 a.m. UTC 
When a DMA channel is opened the IRQ should not get activated
automatically, this allows it to pull data out manually without the help
of interrupts. This is needed for a workaround in the vrx200 Ethernet
driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Paul Burton <paul.burton@mips.com>
---
 arch/mips/lantiq/xway/dma.c        | 1 -
 drivers/net/ethernet/lantiq_etop.c | 1 +
 2 files changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index 664f2f7f55c1..982859f2b2a3 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -106,7 +106,6 @@  ltq_dma_open(struct ltq_dma_channel *ch)
 	spin_lock_irqsave(&ltq_dma_lock, flag);
 	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
 	ltq_dma_w32_mask(0, DMA_CHAN_ON, LTQ_DMA_CCTRL);
-	ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
 	spin_unlock_irqrestore(&ltq_dma_lock, flag);
 }
 EXPORT_SYMBOL_GPL(ltq_dma_open);
diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
index e08301d833e2..379db19a303c 100644
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -439,6 +439,7 @@  ltq_etop_open(struct net_device *dev)
 		if (!IS_TX(i) && (!IS_RX(i)))
 			continue;
 		ltq_dma_open(&ch->dma);
+		ltq_dma_enable_irq(&ch->dma);
 		napi_enable(&ch->napi);
 	}
 	phy_start(dev->phydev);