@@ -17,7 +17,7 @@
#include "be.h"
-void be_mcc_notify(struct be_ctrl_info *ctrl)
+static void be_mcc_notify(struct be_ctrl_info *ctrl)
{
struct be_queue_info *mccq = &ctrl->mcc_obj.q;
u32 val = 0;
@@ -101,6 +101,28 @@ void be_process_mcc(struct be_ctrl_info *ctrl)
spin_unlock_bh(&ctrl->mcc_cq_lock);
}
+/* Wait till no more pending mcc requests are present */
+static void be_mcc_wait_compl(struct be_ctrl_info *ctrl)
+{
+#define mcc_timeout 50000 /* 5s timeout */
+ int i;
+ for (i = 0; i < mcc_timeout; i++) {
+ be_process_mcc(ctrl);
+ if (atomic_read(&ctrl->mcc_obj.q.used) == 0)
+ break;
+ udelay(100);
+ }
+ if (i == mcc_timeout)
+ printk(KERN_WARNING DRV_NAME "mcc poll timed out\n");
+}
+
+/* Notify MCC requests and wait for completion */
+static void be_mcc_notify_wait(struct be_ctrl_info *ctrl)
+{
+ be_mcc_notify(ctrl);
+ be_mcc_wait_compl(ctrl);
+}
+
static int be_mbox_db_ready_wait(void __iomem *db)
{
int cnt = 0, wait = 5;
@@ -872,14 +894,18 @@ int be_cmd_vlan_config(struct be_ctrl_info *ctrl, u32 if_id, u16 *vtag_array,
return status;
}
+/* Use MCC for this command as it may be called in BH context */
int be_cmd_promiscuous_config(struct be_ctrl_info *ctrl, u8 port_num, bool en)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
- struct be_cmd_req_promiscuous_config *req = embedded_payload(wrb);
- int status;
+ struct be_mcc_wrb *wrb;
+ struct be_cmd_req_promiscuous_config *req;
- spin_lock(&ctrl->mbox_lock);
- memset(wrb, 0, sizeof(*wrb));
+ spin_lock_bh(&ctrl->mcc_lock);
+
+ wrb = wrb_from_mcc(&ctrl->mcc_obj.q);
+ BUG_ON(!wrb);
+
+ req = embedded_payload(wrb);
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -891,21 +917,29 @@ int be_cmd_promiscuous_config(struct be_ctrl_info *ctrl, u8 port_num, bool en)
else
req->port0_promiscuous = en;
- status = be_mbox_db_ring(ctrl);
+ be_mcc_notify_wait(ctrl);
- spin_unlock(&ctrl->mbox_lock);
- return status;
+ spin_unlock_bh(&ctrl->mcc_lock);
+ return 0;
}
+/*
+ * Use MCC for this command as it may be called in BH context
+ * (mc == NULL) => multicast promiscous
+ */
int be_cmd_mcast_mac_set(struct be_ctrl_info *ctrl, u32 if_id, u8 *mac_table,
u32 num, bool promiscuous)
{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
- struct be_cmd_req_mcast_mac_config *req = embedded_payload(wrb);
- int status;
+#define BE_MAX_MC 32 /* set mcast promisc if > 32 */
+ struct be_mcc_wrb *wrb;
+ struct be_cmd_req_mcast_mac_config *req;
- spin_lock(&ctrl->mbox_lock);
- memset(wrb, 0, sizeof(*wrb));
+ spin_lock_bh(&ctrl->mcc_lock);
+
+ wrb = wrb_from_mcc(&ctrl->mcc_obj.q);
+ BUG_ON(!wrb);
+
+ req = embedded_payload(wrb);
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -920,10 +954,11 @@ int be_cmd_mcast_mac_set(struct be_ctrl_info *ctrl, u32 if_id, u8 *mac_table,
memcpy(req->mac, mac_table, ETH_ALEN * num);
}
- status = be_mbox_db_ring(ctrl);
+ be_mcc_notify_wait(ctrl);
- spin_unlock(&ctrl->mbox_lock);
- return status;
+ spin_unlock_bh(&ctrl->mcc_lock);
+
+ return 0;
}
int be_cmd_set_flow_control(struct be_ctrl_info *ctrl, u32 tx_fc, u32 rx_fc)
Currenlty multicast_set and promiscuous_config cmds -- that may be called in BH context -- use the blocking MCC mbox to post cmds. An mbox cmd is protected via a spin_lock(cmd_lock) and not spin_lock_bh() as it is undesirable to disable BHs while a blocking mbox cmd is in progress (and take long to finish.) This can lockup a cmd in progress in process context. So, these two cmds in BH context must use the MCC queue to post cmds. Signed-off-by: Sathya Perla <sathyap@serverengines.com> --- drivers/net/benet/be_cmds.c | 69 ++++++++++++++++++++++++++++++++---------- 1 files changed, 52 insertions(+), 17 deletions(-)