Message ID | 1587732391-3374-3-git-send-email-florinel.iordache@nxp.com |
---|---|
State | Changes Requested |
Delegated to: | David Miller |
Headers | show |
Series | net: ethernet backplane support | expand |
On Fri, Apr 24, 2020 at 7:46 AM Florinel Iordache <florinel.iordache@nxp.com> wrote: > > Add ethernet backplane device tree bindings For a new, common binding, you've got to do better than this. Bindings need to stand on their own. I need a h/w block diagram or something because I know little about "ethernet backplane". > > Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> > --- > .../bindings/net/ethernet-controller.yaml | 3 +- > .../devicetree/bindings/net/ethernet-phy.yaml | 50 +++++++++++++++++++++ > .../devicetree/bindings/net/serdes-lane.yaml | 51 ++++++++++++++++++++++ > Documentation/devicetree/bindings/net/serdes.yaml | 44 +++++++++++++++++++ > 4 files changed, 147 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/net/serdes-lane.yaml > create mode 100644 Documentation/devicetree/bindings/net/serdes.yaml > > diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml > index ac471b6..541cee5 100644 > --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml > +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml > @@ -93,8 +93,9 @@ properties: > - rxaui > - xaui > > - # 10GBASE-KR, XFI, SFI > + # 10GBASE-KR, 40GBASE-KR4, XFI, SFI > - 10gbase-kr > + - 40gbase-kr4 > - usxgmii > > phy-mode: > diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml > index 5aa141c..436b5a7 100644 > --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml > +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml > @@ -161,6 +161,42 @@ properties: > description: > Specifies a reference to a node representing a SFP cage. > > + eq-algorithm: > + description: > + Specifies the desired equalization algorithm to be used > + by the KR link training > + oneOf: > + - const: fixed > + description: > + Backplane KR using fixed coefficients meaning no > + equalization algorithm > + - const: bee > + description: > + Backplane KR using 3-Taps Bit Edge Equalization (BEE) > + algorithm > + > + eq-init: eq-coefficients? > + $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 3 > + maxItems: 3 > + description: > + Triplet of KR coefficients. Specifies the initialization > + values for standard KR equalization coefficients used by > + the link training (pre-cursor, main-cursor, post-cursor) items: - description: pre-cursor - description: main-cursor ... Is 0-2^32 valid data? If not, add some constraints. > + > + eq-params: > + $ref: /schemas/types.yaml#/definitions/uint32-array > + description: > + Variable size array of KR parameters. Specifies the HW > + specific parameters used by the link training. DT is not a dumping ground for magic register values. eq-init vs. eq-params is pretty vague as to what they are. I fail to see how these properties are related to $subject. Should be a separate patch. > + > + lane-handle: > + $ref: /schemas/types.yaml#definitions/phandle > + description: > + Specifies a reference (or array of references) to a node > + representing the desired SERDES lane (or lanes) used in > + backplane mode. > + > required: > - reg > > @@ -183,3 +219,17 @@ examples: > reset-deassert-us = <2000>; > }; > }; > + - | > + ethernet { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethernet-phy@0 { > + compatible = "ethernet-phy-ieee802.3-c45"; > + reg = <0x0>; > + lane-handle = <&lane_d>; > + eq-algorithm = "fixed"; > + eq-init = <0x2 0x29 0x5>; > + eq-params = <0>; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/net/serdes-lane.yaml b/Documentation/devicetree/bindings/net/serdes-lane.yaml > new file mode 100644 > index 0000000..ce3581e > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/serdes-lane.yaml > @@ -0,0 +1,51 @@ > +# SPDX-License-Identifier: GPL-2.0 Dual license new bindings: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/serdes-lane.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Serdes Lane Binding > + > +maintainers: > + - Florinel Iordache <florinel.iordache@nxp.com> > + > +properties: > + $nodename: > + pattern: "^lane(@[a-f0-9]+)?$" > + > + compatible: > + oneOf: > + - const: lane-10g > + description: Lane part of a 10G SerDes module > + - const: lane-28g > + description: Lane part of a 28G SerDes module > + > + reg: > + description: > + Registers memory map offset and size for this lane > + > + reg-names: > + description: > + Names of the register map given in "reg" node. > + > +examples: > + - | > + serdes1: serdes@1ea0000 { > + compatible = "serdes-10g"; Do you have a datasheet for this device as bindings describe devices? I assume not because serdes is a protocol, not a device. AFAIK, there's no standard programming interface for 'serdes' as that is about the only time we have any sort of genericish compatible strings. The compatible string at a minimum should tell me what the programming model for the registers are. > + reg = <0x0 0x1ea0000 0 0x00002000>; > + reg-names = "serdes", "serdes-10g"; The default address and sizes are 1 cell. So you have addr 0 with size 0x1ea0000 and then addr 0 with size 0x2000. > + little-endian; > + > + #address-cells = <1>; > + #size-cells = <1>; > + lane_a: lane@800 { > + compatible = "lane-10g"; > + reg = <0x800 0x40>; > + reg-names = "lane", "serdes-lane"; Not valid. You have 1 entry (with a addr and size) for reg, but 2 entries for reg-names. 40G is made up of 4 10G lanes, right? Do all 40G serdes phys have separate register regions for each lane? You can't assume lanes and DT nodes are 1-1. As lanes have to be child nodes, these 2 schemas should be 1. Though I don't think lane nodes will survive. > + }; > + lane_b: lane@840 { > + compatible = "lane-10g"; > + reg = <0x840 0x40>; > + reg-names = "lane", "serdes-lane"; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/net/serdes.yaml b/Documentation/devicetree/bindings/net/serdes.yaml > new file mode 100644 > index 0000000..fd3da85 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/serdes.yaml > @@ -0,0 +1,44 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/serdes.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Serdes Module Binding > + > +maintainers: > + - Florinel Iordache <florinel.iordache@nxp.com> > + > +properties: > + $nodename: > + pattern: "^serdes(@[a-f0-9]+)?$" > + > + compatible: > + oneOf: > + - const: serdes-10g > + description: SerDes module type of 10G > + - const: serdes-28g > + description: SerDes module type of 28G > + > + reg: > + description: > + Registers memory map offset and size for this serdes module > + > + reg-names: > + description: > + Names of the register map given in "reg" node. > + > + little-endian: > + description: > + Specifies the endianness of serdes module > + For complete definition see > + Documentation/devicetree/bindings/common-properties.txt > + > +examples: > + - | > + serdes1: serdes@1ea0000 { > + compatible = "serdes-10g"; > + reg = <0x0 0x1ea0000 0 0x00002000>; > + reg-names = "serdes", "serdes-10g"; > + little-endian; > + }; > -- > 1.9.1 >
On Fri, Apr 24, 2020 at 03:46:24PM +0300, Florinel Iordache wrote: > diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml > index ac471b6..541cee5 100644 > --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml > +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml > @@ -93,8 +93,9 @@ properties: > - rxaui > - xaui > > - # 10GBASE-KR, XFI, SFI > + # 10GBASE-KR, 40GBASE-KR4, XFI, SFI > - 10gbase-kr > + - 40gbase-kr4 > - usxgmii This makes a nonsense of the comment (and is actually something I failed to update with the 10GBASE-R change). The comment "10GBASE-KR, XFI, SFI" was there to describe _only_ the following option, so your addition should look like: # 10GBASE-KR, XFI, SFI - 10gbase-kr # 40GBASE-KR4 - 40gbase-kr4 Whereas there should also be a fix for the lack of 10GBASE-R, so it should finally look like this: # 10GBASE-R, XFI, SFI - 10gbase-r # 10GBASE-KR (10GBASE-R with backplane negotiation) - 10gbase-kr # 40GBASE-KR4 (...) - 40gbase-kr4
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index ac471b6..541cee5 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -93,8 +93,9 @@ properties: - rxaui - xaui - # 10GBASE-KR, XFI, SFI + # 10GBASE-KR, 40GBASE-KR4, XFI, SFI - 10gbase-kr + - 40gbase-kr4 - usxgmii phy-mode: diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 5aa141c..436b5a7 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -161,6 +161,42 @@ properties: description: Specifies a reference to a node representing a SFP cage. + eq-algorithm: + description: + Specifies the desired equalization algorithm to be used + by the KR link training + oneOf: + - const: fixed + description: + Backplane KR using fixed coefficients meaning no + equalization algorithm + - const: bee + description: + Backplane KR using 3-Taps Bit Edge Equalization (BEE) + algorithm + + eq-init: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + description: + Triplet of KR coefficients. Specifies the initialization + values for standard KR equalization coefficients used by + the link training (pre-cursor, main-cursor, post-cursor) + + eq-params: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + Variable size array of KR parameters. Specifies the HW + specific parameters used by the link training. + + lane-handle: + $ref: /schemas/types.yaml#definitions/phandle + description: + Specifies a reference (or array of references) to a node + representing the desired SERDES lane (or lanes) used in + backplane mode. + required: - reg @@ -183,3 +219,17 @@ examples: reset-deassert-us = <2000>; }; }; + - | + ethernet { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + lane-handle = <&lane_d>; + eq-algorithm = "fixed"; + eq-init = <0x2 0x29 0x5>; + eq-params = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/serdes-lane.yaml b/Documentation/devicetree/bindings/net/serdes-lane.yaml new file mode 100644 index 0000000..ce3581e --- /dev/null +++ b/Documentation/devicetree/bindings/net/serdes-lane.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/serdes-lane.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Serdes Lane Binding + +maintainers: + - Florinel Iordache <florinel.iordache@nxp.com> + +properties: + $nodename: + pattern: "^lane(@[a-f0-9]+)?$" + + compatible: + oneOf: + - const: lane-10g + description: Lane part of a 10G SerDes module + - const: lane-28g + description: Lane part of a 28G SerDes module + + reg: + description: + Registers memory map offset and size for this lane + + reg-names: + description: + Names of the register map given in "reg" node. + +examples: + - | + serdes1: serdes@1ea0000 { + compatible = "serdes-10g"; + reg = <0x0 0x1ea0000 0 0x00002000>; + reg-names = "serdes", "serdes-10g"; + little-endian; + + #address-cells = <1>; + #size-cells = <1>; + lane_a: lane@800 { + compatible = "lane-10g"; + reg = <0x800 0x40>; + reg-names = "lane", "serdes-lane"; + }; + lane_b: lane@840 { + compatible = "lane-10g"; + reg = <0x840 0x40>; + reg-names = "lane", "serdes-lane"; + }; + }; diff --git a/Documentation/devicetree/bindings/net/serdes.yaml b/Documentation/devicetree/bindings/net/serdes.yaml new file mode 100644 index 0000000..fd3da85 --- /dev/null +++ b/Documentation/devicetree/bindings/net/serdes.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/serdes.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Serdes Module Binding + +maintainers: + - Florinel Iordache <florinel.iordache@nxp.com> + +properties: + $nodename: + pattern: "^serdes(@[a-f0-9]+)?$" + + compatible: + oneOf: + - const: serdes-10g + description: SerDes module type of 10G + - const: serdes-28g + description: SerDes module type of 28G + + reg: + description: + Registers memory map offset and size for this serdes module + + reg-names: + description: + Names of the register map given in "reg" node. + + little-endian: + description: + Specifies the endianness of serdes module + For complete definition see + Documentation/devicetree/bindings/common-properties.txt + +examples: + - | + serdes1: serdes@1ea0000 { + compatible = "serdes-10g"; + reg = <0x0 0x1ea0000 0 0x00002000>; + reg-names = "serdes", "serdes-10g"; + little-endian; + };
Add ethernet backplane device tree bindings Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> --- .../bindings/net/ethernet-controller.yaml | 3 +- .../devicetree/bindings/net/ethernet-phy.yaml | 50 +++++++++++++++++++++ .../devicetree/bindings/net/serdes-lane.yaml | 51 ++++++++++++++++++++++ Documentation/devicetree/bindings/net/serdes.yaml | 44 +++++++++++++++++++ 4 files changed, 147 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/net/serdes-lane.yaml create mode 100644 Documentation/devicetree/bindings/net/serdes.yaml