diff mbox series

[RFC,V2,net] net: phy: Fix "link partner" information disappear issue

Message ID 1571057797-37602-1-git-send-email-liuyonglong@huawei.com
State RFC
Delegated to: David Miller
Headers show
Series [RFC,V2,net] net: phy: Fix "link partner" information disappear issue | expand

Commit Message

Yonglong Liu Oct. 14, 2019, 12:56 p.m. UTC
Some drivers just call phy_ethtool_ksettings_set() to set the
links, for those phy drivers that use genphy_read_status(), if
autoneg is on, and the link is up, than execute "ethtool -s
ethx autoneg on" will cause "link partner" information disappear.

The call trace is phy_ethtool_ksettings_set()->phy_start_aneg()
->linkmode_zero(phydev->lp_advertising)->genphy_read_status(),
the link didn't change, so genphy_read_status() just return, and
phydev->lp_advertising is zero now.

This patch moves the clear operation of lp_advertising from
phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and
if autoneg on and autoneg not complete, just clear what the
generic functions care about.

Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>

---
change log:
V2: moves the clear operation of lp_advertising from
phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and
if autoneg on and autoneg not complete, just clear what the
generic functions care about. Suggested by Heiner Kallweit.
---
---
 drivers/net/phy/phy-c45.c    |  2 ++
 drivers/net/phy/phy.c        |  3 ---
 drivers/net/phy/phy_device.c | 12 +++++++++++-
 3 files changed, 13 insertions(+), 4 deletions(-)

Comments

Heiner Kallweit Oct. 15, 2019, 8:02 p.m. UTC | #1
On 14.10.2019 14:56, Yonglong Liu wrote:
> Some drivers just call phy_ethtool_ksettings_set() to set the
> links, for those phy drivers that use genphy_read_status(), if
> autoneg is on, and the link is up, than execute "ethtool -s
> ethx autoneg on" will cause "link partner" information disappear.
> 
> The call trace is phy_ethtool_ksettings_set()->phy_start_aneg()
> ->linkmode_zero(phydev->lp_advertising)->genphy_read_status(),
> the link didn't change, so genphy_read_status() just return, and
> phydev->lp_advertising is zero now.
> 
> This patch moves the clear operation of lp_advertising from
> phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and
> if autoneg on and autoneg not complete, just clear what the
> generic functions care about.
> 
> Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status")
> Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
> 
Looks good to me, two small nits below.


> ---
> change log:
> V2: moves the clear operation of lp_advertising from
> phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and
> if autoneg on and autoneg not complete, just clear what the
> generic functions care about. Suggested by Heiner Kallweit.
> ---
> ---
This line seems to be duplicated.

>  drivers/net/phy/phy-c45.c    |  2 ++
>  drivers/net/phy/phy.c        |  3 ---
>  drivers/net/phy/phy_device.c | 12 +++++++++++-
>  3 files changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
> index 7935593..a1caeee 100644
> --- a/drivers/net/phy/phy-c45.c
> +++ b/drivers/net/phy/phy-c45.c
> @@ -323,6 +323,8 @@ int genphy_c45_read_pma(struct phy_device *phydev)
>  {
>  	int val;
>  
> +	linkmode_zero(phydev->lp_advertising);
> +
>  	val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
>  	if (val < 0)
>  		return val;
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index 119e6f4..105d389b 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -572,9 +572,6 @@ int phy_start_aneg(struct phy_device *phydev)
>  	if (AUTONEG_DISABLE == phydev->autoneg)
>  		phy_sanitize_settings(phydev);
>  
> -	/* Invalidate LP advertising flags */
> -	linkmode_zero(phydev->lp_advertising);
> -
>  	err = phy_config_aneg(phydev);
>  	if (err < 0)
>  		goto out_unlock;
> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> index 9d2bbb1..4b43466 100644
> --- a/drivers/net/phy/phy_device.c
> +++ b/drivers/net/phy/phy_device.c
> @@ -1787,7 +1787,14 @@ int genphy_read_lpa(struct phy_device *phydev)
>  {
>  	int lpa, lpagb;
>  
> -	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
> +	if (phydev->autoneg == AUTONEG_ENABLE) {
> +		if (!phydev->autoneg_complete) {
> +			mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
> +							0);
> +			mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0);
> +			return 0;
> +		}
> +
>  		if (phydev->is_gigabit_capable) {
>  			lpagb = phy_read(phydev, MII_STAT1000);
>  			if (lpagb < 0)
> @@ -1816,6 +1823,9 @@ int genphy_read_lpa(struct phy_device *phydev)
>  
>  		mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa);
>  	}
> +	else {

"} else {" should be on one line.

> +		linkmode_zero(phydev->lp_advertising);
> +	}
>  
>  	return 0;
>  }
>
Yonglong Liu Oct. 16, 2019, 2:27 a.m. UTC | #2
On 2019/10/16 4:02, Heiner Kallweit wrote:
> On 14.10.2019 14:56, Yonglong Liu wrote:
>> Some drivers just call phy_ethtool_ksettings_set() to set the
>> links, for those phy drivers that use genphy_read_status(), if
>> autoneg is on, and the link is up, than execute "ethtool -s
>> ethx autoneg on" will cause "link partner" information disappear.
>>
>> The call trace is phy_ethtool_ksettings_set()->phy_start_aneg()
>> ->linkmode_zero(phydev->lp_advertising)->genphy_read_status(),
>> the link didn't change, so genphy_read_status() just return, and
>> phydev->lp_advertising is zero now.
>>
>> This patch moves the clear operation of lp_advertising from
>> phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and
>> if autoneg on and autoneg not complete, just clear what the
>> generic functions care about.
>>
>> Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status")
>> Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
>>
> Looks good to me, two small nits below.
> 
> 

Thanks! Will fix the two small nits and send it to "net" branch.

>> ---
>> change log:
>> V2: moves the clear operation of lp_advertising from
>> phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and
>> if autoneg on and autoneg not complete, just clear what the
>> generic functions care about. Suggested by Heiner Kallweit.
>> ---
>> ---
> This line seems to be duplicated.
> 
>>  drivers/net/phy/phy-c45.c    |  2 ++
>>  drivers/net/phy/phy.c        |  3 ---
>>  drivers/net/phy/phy_device.c | 12 +++++++++++-
>>  3 files changed, 13 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
>> index 7935593..a1caeee 100644
>> --- a/drivers/net/phy/phy-c45.c
>> +++ b/drivers/net/phy/phy-c45.c
>> @@ -323,6 +323,8 @@ int genphy_c45_read_pma(struct phy_device *phydev)
>>  {
>>  	int val;
>>  
>> +	linkmode_zero(phydev->lp_advertising);
>> +
>>  	val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
>>  	if (val < 0)
>>  		return val;
>> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
>> index 119e6f4..105d389b 100644
>> --- a/drivers/net/phy/phy.c
>> +++ b/drivers/net/phy/phy.c
>> @@ -572,9 +572,6 @@ int phy_start_aneg(struct phy_device *phydev)
>>  	if (AUTONEG_DISABLE == phydev->autoneg)
>>  		phy_sanitize_settings(phydev);
>>  
>> -	/* Invalidate LP advertising flags */
>> -	linkmode_zero(phydev->lp_advertising);
>> -
>>  	err = phy_config_aneg(phydev);
>>  	if (err < 0)
>>  		goto out_unlock;
>> diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
>> index 9d2bbb1..4b43466 100644
>> --- a/drivers/net/phy/phy_device.c
>> +++ b/drivers/net/phy/phy_device.c
>> @@ -1787,7 +1787,14 @@ int genphy_read_lpa(struct phy_device *phydev)
>>  {
>>  	int lpa, lpagb;
>>  
>> -	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
>> +	if (phydev->autoneg == AUTONEG_ENABLE) {
>> +		if (!phydev->autoneg_complete) {
>> +			mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
>> +							0);
>> +			mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0);
>> +			return 0;
>> +		}
>> +
>>  		if (phydev->is_gigabit_capable) {
>>  			lpagb = phy_read(phydev, MII_STAT1000);
>>  			if (lpagb < 0)
>> @@ -1816,6 +1823,9 @@ int genphy_read_lpa(struct phy_device *phydev)
>>  
>>  		mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa);
>>  	}
>> +	else {
> 
> "} else {" should be on one line.
> 
>> +		linkmode_zero(phydev->lp_advertising);
>> +	}
>>  
>>  	return 0;
>>  }
>>
> 
> 
> .
>
diff mbox series

Patch

diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index 7935593..a1caeee 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -323,6 +323,8 @@  int genphy_c45_read_pma(struct phy_device *phydev)
 {
 	int val;
 
+	linkmode_zero(phydev->lp_advertising);
+
 	val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
 	if (val < 0)
 		return val;
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 119e6f4..105d389b 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -572,9 +572,6 @@  int phy_start_aneg(struct phy_device *phydev)
 	if (AUTONEG_DISABLE == phydev->autoneg)
 		phy_sanitize_settings(phydev);
 
-	/* Invalidate LP advertising flags */
-	linkmode_zero(phydev->lp_advertising);
-
 	err = phy_config_aneg(phydev);
 	if (err < 0)
 		goto out_unlock;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 9d2bbb1..4b43466 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1787,7 +1787,14 @@  int genphy_read_lpa(struct phy_device *phydev)
 {
 	int lpa, lpagb;
 
-	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
+	if (phydev->autoneg == AUTONEG_ENABLE) {
+		if (!phydev->autoneg_complete) {
+			mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising,
+							0);
+			mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0);
+			return 0;
+		}
+
 		if (phydev->is_gigabit_capable) {
 			lpagb = phy_read(phydev, MII_STAT1000);
 			if (lpagb < 0)
@@ -1816,6 +1823,9 @@  int genphy_read_lpa(struct phy_device *phydev)
 
 		mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa);
 	}
+	else {
+		linkmode_zero(phydev->lp_advertising);
+	}
 
 	return 0;
 }