diff mbox series

[net,2/2] ibmvnic: Fix netdev feature clobbering during a reset

Message ID 1554912420-10796-3-git-send-email-tlfalcon@linux.ibm.com
State Accepted
Delegated to: David Miller
Headers show
Series ibmvnic: Fix netdev features settings on reset | expand

Commit Message

Thomas Falcon April 10, 2019, 4:07 p.m. UTC 
While determining offload capabilities of backing hardware during
a device reset, the driver is clobbering current feature settings.
Update hw_features on reset instead of features unless a feature
is enabled that is no longer supported on the current backing device.
Also enable features that were not supported prior to the reset but
were previously enabled or requested by the user.

This can occur if the reset is the result of a carrier change, such
as a device failover or partition migration.

Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 30 ++++++++++++++++++++++++------
 1 file changed, 24 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 59362ed..9d92ab1 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -3761,6 +3761,7 @@  static void handle_query_ip_offload_rsp(struct ibmvnic_adapter *adapter)
 {
 	struct device *dev = &adapter->vdev->dev;
 	struct ibmvnic_query_ip_offload_buffer *buf = &adapter->ip_offload_buf;
+	netdev_features_t old_hw_features = 0;
 	union ibmvnic_crq crq;
 	int i;
 
@@ -3836,24 +3837,41 @@  static void handle_query_ip_offload_rsp(struct ibmvnic_adapter *adapter)
 	adapter->ip_offload_ctrl.large_rx_ipv4 = 0;
 	adapter->ip_offload_ctrl.large_rx_ipv6 = 0;
 
+	if (adapter->state != VNIC_PROBING) {
+		old_hw_features = adapter->netdev->hw_features;
+		adapter->netdev->hw_features = 0;
+	}
+
 	adapter->netdev->hw_features = NETIF_F_SG | NETIF_F_GSO | NETIF_F_GRO;
 
 	if (buf->tcp_ipv4_chksum || buf->udp_ipv4_chksum)
-		adapter->netdev->features |= NETIF_F_IP_CSUM;
+		adapter->netdev->hw_features |= NETIF_F_IP_CSUM;
 
 	if (buf->tcp_ipv6_chksum || buf->udp_ipv6_chksum)
-		adapter->netdev->features |= NETIF_F_IPV6_CSUM;
+		adapter->netdev->hw_features |= NETIF_F_IPV6_CSUM;
 
 	if ((adapter->netdev->features &
 	    (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM)))
-		adapter->netdev->features |= NETIF_F_RXCSUM;
+		adapter->netdev->hw_features |= NETIF_F_RXCSUM;
 
 	if (buf->large_tx_ipv4)
-		adapter->netdev->features |= NETIF_F_TSO;
+		adapter->netdev->hw_features |= NETIF_F_TSO;
 	if (buf->large_tx_ipv6)
-		adapter->netdev->features |= NETIF_F_TSO6;
+		adapter->netdev->hw_features |= NETIF_F_TSO6;
 
-	adapter->netdev->hw_features |= adapter->netdev->features;
+	if (adapter->state == VNIC_PROBING) {
+		adapter->netdev->features |= adapter->netdev->hw_features;
+	} else if (old_hw_features != adapter->netdev->hw_features) {
+		netdev_features_t tmp = 0;
+
+		/* disable features no longer supported */
+		adapter->netdev->features &= adapter->netdev->hw_features;
+		/* turn on features now supported if previously enabled */
+		tmp = (old_hw_features ^ adapter->netdev->hw_features) &
+			adapter->netdev->hw_features;
+		adapter->netdev->features |=
+				tmp & adapter->netdev->wanted_features;
+	}
 
 	memset(&crq, 0, sizeof(crq));
 	crq.control_ip_offload.first = IBMVNIC_CRQ_CMD;