diff --git a/drivers/net/lora/sx1301.c b/drivers/net/lora/sx1301.c
index 5342b61..3c09f5a 100644
--- a/drivers/net/lora/sx1301.c
+++ b/drivers/net/lora/sx1301.c
@@ -3,6 +3,7 @@
  * Semtech SX1301 LoRa concentrator
  *
  * Copyright (c) 2018 Andreas Färber
+ * Copyright (c) 2018 Ben Whitten
  *
  * Based on SX1301 HAL code:
  * Copyright (c) 2013 Semtech-Cycleo
@@ -637,20 +638,17 @@ static int sx1301_probe(struct spi_device *spi)
 	ret = sx1301_read(spi, REG_VERSION, &val);
 	if (ret) {
 		dev_err(&spi->dev, "version read failed\n");
-		goto err_version;
+		return ret;
 	}
 
 	if (val != 103) {
 		dev_err(&spi->dev, "unexpected version: %u\n", val);
-		ret = -ENXIO;
-		goto err_version;
+		return -ENXIO;
 	}
 
-	netdev = alloc_loradev(sizeof(*priv));
-	if (!netdev) {
-		ret = -ENOMEM;
-		goto err_alloc_loradev;
-	}
+	netdev = devm_alloc_loradev(&spi->dev, sizeof(*priv));
+	if (!netdev)
+		return -ENOMEM;
 
 	priv = netdev_priv(netdev);
 	priv->rst_gpio = rst;
@@ -662,19 +660,19 @@ static int sx1301_probe(struct spi_device *spi)
 	ret = sx1301_write(spi, REG_PAGE_RESET, 0);
 	if (ret) {
 		dev_err(&spi->dev, "page/reset write failed\n");
-		goto err_init_page;
+		return ret;
 	}
 
 	ret = sx1301_soft_reset(spi);
 	if (ret) {
 		dev_err(&spi->dev, "soft reset failed\n");
-		goto err_soft_reset;
+		return ret;
 	}
 
 	ret = sx1301_read(spi, 16, &val);
 	if (ret) {
 		dev_err(&spi->dev, "16 read failed\n");
-		goto err_read_global_en_0;
+		return ret;
 	}
 
 	val &= ~REG_16_GLOBAL_EN;
@@ -682,13 +680,13 @@ static int sx1301_probe(struct spi_device *spi)
 	ret = sx1301_write(spi, 16, val);
 	if (ret) {
 		dev_err(&spi->dev, "16 write failed\n");
-		goto err_write_global_en_0;
+		return ret;
 	}
 
 	ret = sx1301_read(spi, 17, &val);
 	if (ret) {
 		dev_err(&spi->dev, "17 read failed\n");
-		goto err_read_clk32m_0;
+		return ret;
 	}
 
 	val &= ~REG_17_CLK32M_EN;
@@ -696,7 +694,7 @@ static int sx1301_probe(struct spi_device *spi)
 	ret = sx1301_write(spi, 17, val);
 	if (ret) {
 		dev_err(&spi->dev, "17 write failed\n");
-		goto err_write_clk32m_0;
+		return ret;
 	}
 
 	ret = sx1301_page_read(spi, 2, 43, &val);
@@ -749,8 +747,7 @@ static int sx1301_probe(struct spi_device *spi)
 
 	priv->radio_a_ctrl = spi_alloc_master(&spi->dev, sizeof(*radio));
 	if (!priv->radio_a_ctrl) {
-		ret = -ENOMEM;
-		goto err_radio_a_alloc;
+		return -ENOMEM;
 	}
 
 	sx1301_radio_setup(priv->radio_a_ctrl);
@@ -765,15 +762,14 @@ static int sx1301_probe(struct spi_device *spi)
 	if (ret) {
 		dev_err(&spi->dev, "radio A SPI register failed\n");
 		spi_controller_put(priv->radio_a_ctrl);
-		goto err_radio_a_register;
+		return ret;
 	}
 
 	/* radio B */
 
 	priv->radio_b_ctrl = spi_alloc_master(&spi->dev, sizeof(*radio));
 	if (!priv->radio_b_ctrl) {
-		ret = -ENOMEM;
-		goto err_radio_b_alloc;
+		return -ENOMEM;
 	}
 
 	sx1301_radio_setup(priv->radio_b_ctrl);
@@ -788,7 +784,7 @@ static int sx1301_probe(struct spi_device *spi)
 	if (ret) {
 		dev_err(&spi->dev, "radio B SPI register failed\n");
 		spi_controller_put(priv->radio_b_ctrl);
-		goto err_radio_b_register;
+		return ret;
 	}
 
 	/* GPIO */
@@ -796,7 +792,7 @@ static int sx1301_probe(struct spi_device *spi)
 	ret = sx1301_read(spi, REG_GPIO_MODE, &val);
 	if (ret) {
 		dev_err(&spi->dev, "GPIO mode read failed\n");
-		goto err_read_gpio_mode;
+		return ret;
 	}
 
 	val |= GENMASK(4, 0);
@@ -804,13 +800,13 @@ static int sx1301_probe(struct spi_device *spi)
 	ret = sx1301_write(spi, REG_GPIO_MODE, val);
 	if (ret) {
 		dev_err(&spi->dev, "GPIO mode write failed\n");
-		goto err_write_gpio_mode;
+		return ret;
 	}
 
 	ret = sx1301_read(spi, REG_GPIO_SELECT_OUTPUT, &val);
 	if (ret) {
 		dev_err(&spi->dev, "GPIO select output read failed\n");
-		goto err_read_gpio_select_output;
+		return ret;
 	}
 
 	val &= ~GENMASK(3, 0);
@@ -819,7 +815,7 @@ static int sx1301_probe(struct spi_device *spi)
 	ret = sx1301_write(spi, REG_GPIO_SELECT_OUTPUT, val);
 	if (ret) {
 		dev_err(&spi->dev, "GPIO select output write failed\n");
-		goto err_write_gpio_select_output;
+		return ret;
 	}
 
 	/* TODO LBT */
@@ -827,7 +823,7 @@ static int sx1301_probe(struct spi_device *spi)
 	ret = sx1301_read(spi, 16, &val);
 	if (ret) {
 		dev_err(&spi->dev, "16 read (1) failed\n");
-		goto err_read_global_en_1;
+		return ret;
 	}
 
 	val |= REG_16_GLOBAL_EN;
@@ -835,13 +831,13 @@ static int sx1301_probe(struct spi_device *spi)
 	ret = sx1301_write(spi, 16, val);
 	if (ret) {
 		dev_err(&spi->dev, "16 write (1) failed\n");
-		goto err_write_global_en_1;
+		return ret;
 	}
 
 	ret = sx1301_read(spi, 17, &val);
 	if (ret) {
 		dev_err(&spi->dev, "17 read (1) failed\n");
-		goto err_read_clk32m_1;
+		return ret;
 	}
 
 	val |= REG_17_CLK32M_EN;
@@ -849,58 +845,28 @@ static int sx1301_probe(struct spi_device *spi)
 	ret = sx1301_write(spi, 17, val);
 	if (ret) {
 		dev_err(&spi->dev, "17 write (1) failed\n");
-		goto err_write_clk32m_1;
+		return ret;
 	}
 
 	/* calibration */
 
 	ret = sx1301_agc_calibrate(spi);
 	if (ret)
-		goto err_agc_calibrate;
+		return ret;
 
 	/* TODO */
 
 	ret = sx1301_load_all_firmware(spi);
 	if (ret)
-		goto err_load_firmware;
+		return ret;
 
 	dev_info(&spi->dev, "SX1301 module probed\n");
 
 	return 0;
-
-err_load_firmware:
-err_agc_calibrate:
-err_write_clk32m_1:
-err_read_clk32m_1:
-err_write_global_en_1:
-err_read_global_en_1:
-err_write_gpio_select_output:
-err_read_gpio_select_output:
-err_write_gpio_mode:
-err_read_gpio_mode:
-err_radio_b_register:
-err_radio_b_alloc:
-err_radio_a_register:
-err_radio_a_alloc:
-err_write_clk32m_0:
-err_read_clk32m_0:
-err_write_global_en_0:
-err_read_global_en_0:
-err_soft_reset:
-err_init_page:
-	free_loradev(netdev);
-err_alloc_loradev:
-err_version:
-	return ret;
 }
 
 static int sx1301_remove(struct spi_device *spi)
 {
-	struct net_device *netdev = spi_get_drvdata(spi);
-
-	//unregister_loradev(netdev);
-	free_loradev(netdev);
-
 	dev_info(&spi->dev, "SX1301 module removed\n");
 
 	return 0;
@@ -927,4 +893,5 @@ module_spi_driver(sx1301_spi_driver);
 
 MODULE_DESCRIPTION("SX1301 SPI driver");
 MODULE_AUTHOR("Andreas Färber <afaerber@suse.de>");
+MODULE_AUTHOR("Ben Whitten <ben.whitten@gmail.com>");
 MODULE_LICENSE("GPL");
