diff mbox series

net: stmmac: socfpga: add additional ocp reset line for Stratix10

Message ID 1529422538-8447-1-git-send-email-dinguyen@kernel.org
State Accepted, archived
Delegated to: David Miller
Headers show
Series net: stmmac: socfpga: add additional ocp reset line for Stratix10 | expand

Commit Message

Dinh Nguyen June 19, 2018, 3:35 p.m. UTC 
The Stratix10 platform has an additional reset line, OCP(Open Core Protocol),
that also needs to get deasserted for the stmmac ethernet controller to work.
Thus we need to update the Kconfig to include ARCH_STRATIX10 in order to build
dwmac-socfpga.

Also, remove the redundant check for the reset controller pointer. The
reset driver already checks for the pointer and returns 0 if the pointer
is NULL.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig         |  2 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 18 ++++++++++++++----
 2 files changed, 15 insertions(+), 5 deletions(-)

Comments

David Miller June 20, 2018, 5:34 a.m. UTC | #1 
From: Dinh Nguyen <dinguyen@kernel.org>
Date: Tue, 19 Jun 2018 10:35:38 -0500

> The Stratix10 platform has an additional reset line, OCP(Open Core Protocol),
> that also needs to get deasserted for the stmmac ethernet controller to work.
> Thus we need to update the Kconfig to include ARCH_STRATIX10 in order to build
> dwmac-socfpga.
> 
> Also, remove the redundant check for the reset controller pointer. The
> reset driver already checks for the pointer and returns 0 if the pointer
> is NULL.
> 
> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

Applied.
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index cb5b0f5..edf2036 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -111,7 +111,7 @@  config DWMAC_ROCKCHIP
 config DWMAC_SOCFPGA
 	tristate "SOCFPGA dwmac support"
 	default ARCH_SOCFPGA
-	depends on OF && (ARCH_SOCFPGA || COMPILE_TEST)
+	depends on OF && (ARCH_SOCFPGA || ARCH_STRATIX10 || COMPILE_TEST)
 	select MFD_SYSCON
 	help
 	  Support for ethernet controller on Altera SOCFPGA
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 6e35957..5b3b06a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -55,6 +55,7 @@  struct socfpga_dwmac {
 	struct	device *dev;
 	struct regmap *sys_mgr_base_addr;
 	struct reset_control *stmmac_rst;
+	struct reset_control *stmmac_ocp_rst;
 	void __iomem *splitter_base;
 	bool f2h_ptp_ref_clk;
 	struct tse_pcs pcs;
@@ -262,8 +263,8 @@  static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac)
 		val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
 
 	/* Assert reset to the enet controller before changing the phy mode */
-	if (dwmac->stmmac_rst)
-		reset_control_assert(dwmac->stmmac_rst);
+	reset_control_assert(dwmac->stmmac_ocp_rst);
+	reset_control_assert(dwmac->stmmac_rst);
 
 	regmap_read(sys_mgr_base_addr, reg_offset, &ctrl);
 	ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
@@ -288,8 +289,8 @@  static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac)
 	/* Deassert reset for the phy configuration to be sampled by
 	 * the enet controller, and operation to start in requested mode
 	 */
-	if (dwmac->stmmac_rst)
-		reset_control_deassert(dwmac->stmmac_rst);
+	reset_control_deassert(dwmac->stmmac_ocp_rst);
+	reset_control_deassert(dwmac->stmmac_rst);
 	if (phymode == PHY_INTERFACE_MODE_SGMII) {
 		if (tse_pcs_init(dwmac->pcs.tse_pcs_base, &dwmac->pcs) != 0) {
 			dev_err(dwmac->dev, "Unable to initialize TSE PCS");
@@ -324,6 +325,15 @@  static int socfpga_dwmac_probe(struct platform_device *pdev)
 		goto err_remove_config_dt;
 	}
 
+	dwmac->stmmac_ocp_rst = devm_reset_control_get_optional(dev, "stmmaceth-ocp");
+	if (IS_ERR(dwmac->stmmac_ocp_rst)) {
+		ret = PTR_ERR(dwmac->stmmac_ocp_rst);
+		dev_err(dev, "error getting reset control of ocp %d\n", ret);
+		goto err_remove_config_dt;
+	}
+
+	reset_control_deassert(dwmac->stmmac_ocp_rst);
+
 	ret = socfpga_dwmac_parse_data(dwmac, dev);
 	if (ret) {
 		dev_err(dev, "Unable to parse OF data\n");