From patchwork Tue Dec 20 02:56:32 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rajat Jain X-Patchwork-Id: 707290 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming@ozlabs.org Delivered-To: patchwork-incoming@ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 3tjMsv5JWqz9t1F for ; Tue, 20 Dec 2016 13:58:11 +1100 (AEDT) Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=google.com header.i=@google.com header.b="d/IBHMDg"; dkim-atps=neutral Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757300AbcLTC6G (ORCPT ); Mon, 19 Dec 2016 21:58:06 -0500 Received: from mail-pg0-f51.google.com ([74.125.83.51]:36527 "EHLO mail-pg0-f51.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756931AbcLTC4u (ORCPT ); Mon, 19 Dec 2016 21:56:50 -0500 Received: by mail-pg0-f51.google.com with SMTP id f188so67188282pgc.3 for ; Mon, 19 Dec 2016 18:56:49 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=KnwOD7hUkSO4HwbgaLQbBLNiLRFVKBvtNpX49IpNdeA=; b=d/IBHMDgYeKz67dSYoUyr7eSGTCMdISHflCd3msapNqegvl57rqmBoCyPnJoVWRSED XhyFAQl11YtnGa7cM572zQ3iGiwUehkbhqyFKBd0+RMmN64oruEg7BjcsAbV7+d2ajQ3 6z6OPPrNgTtQoQonmydmV3nWM3+hxtkaMDf2Hf+RXdrwEySlU32a3MJpE/ri01w7TBj5 31twuTEX9UApd82YDeQMZJbx24ILFiJRYAx3MvcVYs5juoC+TZhFtNNl75YQj3kC0Lq8 9L21QmtkF9etHTAgbvv9HH3hbacE+sbnqHwCdm8K+BqUsZgmTkWv7iS262BXPopAe24Q 1eIA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=KnwOD7hUkSO4HwbgaLQbBLNiLRFVKBvtNpX49IpNdeA=; b=Fadur0z8bNf9AjmR2oc+7lCZDe516VAGbqxhcrjoWwHV6hPGw3O7eH+GUXbaQvamuf N6/qFxxTLUkveeMzokt3teBoLSzT6xe7sgz0Sko5nhwyC9DNoOGIVJgl9BcCmQLzR6no obmTzJevE1SRYQMGL4BacZsqJsktmvZNdxgW5JoZZ+D2n+yvbk2aSKnofjNON7oM7hvY XtQnlTsR+R4FfLhQl2BQJoHtKzYTZ7nU2TY+XjVGmLI7QqVlf8XDLduAD4uWed2vw5R/ 7hfSW+OkPJ1JiWmlbm9OX0ucb64+omKzk1Z2qd/dxjFRxFmlIRGAz4c9E9OyyuKPIAhm eIJw== X-Gm-Message-State: AKaTC01R9yF758et810VXqzFVIOOGFB5sfqbgOtAA3cUjOfQJ90CQeVNuy9kF2mSQxii6dHb X-Received: by 10.99.196.70 with SMTP id m6mr33279350pgg.118.1482202609306; Mon, 19 Dec 2016 18:56:49 -0800 (PST) Received: from rajat.mtv.corp.google.com ([172.22.64.13]) by smtp.gmail.com with ESMTPSA id s3sm2126929pfg.14.2016.12.19.18.56.48 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Mon, 19 Dec 2016 18:56:48 -0800 (PST) From: Rajat Jain To: Rob Herring , Mark Rutland , Marcel Holtmann , Gustavo Padovan , Johan Hedberg , Amitkumar Karwar , Wei-Ning Huang , Xinming Hu , netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-bluetooth@vger.kernel.org, Brian Norris , linux-kernel@vger.kernel.org Cc: Rajat Jain , rajatxjain@gmail.com Subject: [PATCH v3 3/3] Bluetooth: btusb: Configure Marvell to use one of the pins for oob wakeup Date: Mon, 19 Dec 2016 18:56:32 -0800 Message-Id: <1482202592-76314-3-git-send-email-rajatja@google.com> X-Mailer: git-send-email 2.8.0.rc3.226.g39d4020 In-Reply-To: <1482202592-76314-1-git-send-email-rajatja@google.com> References: <1482202592-76314-1-git-send-email-rajatja@google.com> Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org The Marvell devices may have many gpio pins, and hence for wakeup on these out-of-band pins, the chip needs to be told which pin is to be used for wakeup, using an hci command. Thus, we read the pin number etc from the device tree node and send a command to the chip. Signed-off-by: Rajat Jain Reviewed-by: Brian Norris Acked-by: Rob Herring --- v3: * remove the Marvell specific id table and check * Add reference to marvell-bt-8xxx.txt in btusb.txt * Add "Reviewed-by" and "Acked-by" v2: Fix the binding document to specify to use "wakeup" interrupt-name Documentation/devicetree/bindings/net/btusb.txt | 3 ++ .../{marvell-bt-sd8xxx.txt => marvell-bt-8xxx.txt} | 46 +++++++++++++++---- drivers/bluetooth/btusb.c | 51 ++++++++++++++++++++++ 3 files changed, 92 insertions(+), 8 deletions(-) rename Documentation/devicetree/bindings/net/{marvell-bt-sd8xxx.txt => marvell-bt-8xxx.txt} (50%) diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt index 2c0355c..01fa2d4 100644 --- a/Documentation/devicetree/bindings/net/btusb.txt +++ b/Documentation/devicetree/bindings/net/btusb.txt @@ -10,6 +10,9 @@ Required properties: "usb1286,204e" (Marvell 8997) +Also, vendors that use btusb may have device additional properties, e.g: +Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt + Optional properties: - interrupt-parent: phandle of the parent interrupt controller diff --git a/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt similarity index 50% rename from Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt rename to Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt index 6a9a63c..9be1059 100644 --- a/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt +++ b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt @@ -1,16 +1,21 @@ -Marvell 8897/8997 (sd8897/sd8997) bluetooth SDIO devices +Marvell 8897/8997 (sd8897/sd8997) bluetooth devices (SDIO or USB based) ------ +The 8997 devices supports multiple interfaces. When used on SDIO interfaces, +the btmrvl driver is used and when used on USB interface, the btusb driver is +used. Required properties: - compatible : should be one of the following: - * "marvell,sd8897-bt" - * "marvell,sd8997-bt" + * "marvell,sd8897-bt" (for SDIO) + * "marvell,sd8997-bt" (for SDIO) + * "usb1286,204e" (for USB) Optional properties: - marvell,cal-data: Calibration data downloaded to the device during initialization. This is an array of 28 values(u8). + This is only applicable to SDIO devices. - marvell,wakeup-pin: It represents wakeup pin number of the bluetooth chip. firmware will use the pin to wakeup host system (u16). @@ -18,10 +23,15 @@ Optional properties: platform. The value will be configured to firmware. This is needed to work chip's sleep feature as expected (u16). - interrupt-parent: phandle of the parent interrupt controller - - interrupts : interrupt pin number to the cpu. Driver will request an irq based - on this interrupt number. During system suspend, the irq will be - enabled so that the bluetooth chip can wakeup host platform under - certain condition. During system resume, the irq will be disabled + - interrupt-names: Used only for USB based devices (See below) + - interrupts : specifies the interrupt pin number to the cpu. For SDIO, the + driver will use the first interrupt specified in the interrupt + array. For USB based devices, the driver will use the interrupt + named "wakeup" from the interrupt-names and interrupt arrays. + The driver will request an irq based on this interrupt number. + During system suspend, the irq will be enabled so that the + bluetooth chip can wakeup host platform under certain + conditions. During system resume, the irq will be disabled to make sure unnecessary interrupt is not received. Example: @@ -29,7 +39,9 @@ Example: IRQ pin 119 is used as system wakeup source interrupt. wakeup pin 13 and gap 100ms are configured so that firmware can wakeup host using this device side pin and wakeup latency. -calibration data is also available in below example. + +Example for SDIO device follows (calibration data is also available in +below example). &mmc3 { status = "okay"; @@ -54,3 +66,21 @@ calibration data is also available in below example. marvell,wakeup-gap-ms = /bits/ 16 <0x64>; }; }; + +Example for USB device: + +&usb_host1_ohci { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + mvl_bt1: bt@1 { + compatible = "usb1286,204e"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupt-names = "wakeup"; + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; + marvell,wakeup-pin = /bits/ 16 <0x0d>; + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; + }; +}; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index beca4e9..a5c2cf9 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -2343,6 +2343,50 @@ static int btusb_shutdown_intel(struct hci_dev *hdev) return 0; } +#ifdef CONFIG_PM +/* Configure an out-of-band gpio as wake-up pin, if specified in device tree */ +static int marvell_config_oob_wake(struct hci_dev *hdev) +{ + struct sk_buff *skb; + struct btusb_data *data = hci_get_drvdata(hdev); + struct device *dev = &data->udev->dev; + u16 pin, gap, opcode; + int ret; + u8 cmd[5]; + + /* Move on if no wakeup pin specified */ + if (of_property_read_u16(dev->of_node, "marvell,wakeup-pin", &pin) || + of_property_read_u16(dev->of_node, "marvell,wakeup-gap-ms", &gap)) + return 0; + + /* Vendor specific command to configure a GPIO as wake-up pin */ + opcode = hci_opcode_pack(0x3F, 0x59); + cmd[0] = opcode & 0xFF; + cmd[1] = opcode >> 8; + cmd[2] = 2; /* length of parameters that follow */ + cmd[3] = pin; + cmd[4] = gap; /* time in ms, for which wakeup pin should be asserted */ + + skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL); + if (!skb) { + bt_dev_err(hdev, "%s: No memory\n", __func__); + return -ENOMEM; + } + + memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd)); + hci_skb_pkt_type(skb) = HCI_COMMAND_PKT; + + ret = btusb_send_frame(hdev, skb); + if (ret) { + bt_dev_err(hdev, "%s: configuration failed\n", __func__); + kfree_skb(skb); + return ret; + } + + return 0; +} +#endif + static int btusb_set_bdaddr_marvell(struct hci_dev *hdev, const bdaddr_t *bdaddr) { @@ -2917,6 +2961,13 @@ static int btusb_probe(struct usb_interface *intf, err = btusb_config_oob_wake(hdev); if (err) goto out_free_dev; + + /* Marvell devices may need a specific chip configuration */ + if (id->driver_info & BTUSB_MARVELL && data->oob_wake_irq) { + err = marvell_config_oob_wake(hdev); + if (err) + goto out_free_dev; + } #endif if (id->driver_info & BTUSB_CW6622) set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);