@@ -6,12 +6,17 @@ Required properties:
- interrupts: interrupt for the device
- phy: See ethernet.txt file in the same directory.
- phy-mode: See ethernet.txt file in the same directory
-- clocks: a pointer to the reference clock for this device.
+- clocks: List of clocks for this device. At least one clock is
+ mandatory for the core clock. If several clocks are given, then the
+ clock-names property must be used to identify them.
Optional properties:
- tx-csum-limit: maximum mtu supported by port that allow TX checksum.
Value is presented in bytes. If not used, by default 1600B is set for
"marvell,armada-370-neta" and 9800B for others.
+- clock-names: List of names corresponding to clocks property; shall be
+ "core" for core clock and "bus" for the optional bus clock.
+
Example:
Signed-off-by: Jisheng Zhang <jszhang@marvell.com> --- Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)