@@ -508,7 +508,6 @@ static struct sh_eth_cpu_data r8a779x_data = {
.tpauser = 1,
.hw_swap = 1,
.rmiimode = 1,
- .shift_rd0 = 1,
};
static void sh_eth_set_rate_sh7724(struct net_device *ndev)
@@ -1462,8 +1461,8 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status, int *quota)
/* In case of almost all GETHER/ETHERs, the Receive Frame State
* (RFS) bits in the Receive Descriptor 0 are from bit 9 to
- * bit 0. However, in case of the R8A7740, R8A779x, and
- * R7S72100 the RFS bits are from bit 25 to bit 16. So, the
+ * bit 0. However, in case of the R8A7740 and R7S72100
+ * the RFS bits are from bit 25 to bit 16. So, the
* driver needs right shifting by 16.
*/
if (mdp->cd->shift_rd0)
This reverts commit fd9af07c3404ac9ecbd0d859563360f51ce1ffde. The hardware manual states that the frame error and multicast bits are copied to bits 9:0 of RD0, not bits 25:16. I've tested that this is true for RFS1 (CRC error), RFS3 (frame too short), RFS4 (frame too long) and RFS8 (multicast). Also adjust a comment to agree with this. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> --- v2: Add note that this is not a pure revert. drivers/net/ethernet/renesas/sh_eth.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)