diff mbox

[v2,6/9] ARM: berlin: Add BG2 ethernet DT nodes

Message ID 1414002412-13615-7-git-send-email-sebastian.hesselbarth@gmail.com
State Not Applicable, archived
Delegated to: David Miller
Headers show

Commit Message

Sebastian Hesselbarth Oct. 22, 2014, 6:26 p.m. UTC
Marvell BG2 has two fast ethernet controllers with internal PHY,
add the corresponding nodes to SoC dtsi.

Tested-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Changelog:
v1->v2:
- move phy-connection-type to controller node instead of PHY node
  (Reported by Sergei Shtylyov)

Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Antoine Ténart" <antoine.tenart@free-electrons.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 arch/arm/boot/dts/berlin2.dtsi | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

Comments

Sebastian Hesselbarth Oct. 29, 2014, 6:38 p.m. UTC | #1
On 22.10.2014 20:26, Sebastian Hesselbarth wrote:
> Marvell BG2 has two fast ethernet controllers with internal PHY,
> add the corresponding nodes to SoC dtsi.
>
> Tested-by: Antoine Ténart <antoine.tenart@free-electrons.com>
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

Applied the four DT patches to berlin/dt.

Sebastian

> ---
> Changelog:
> v1->v2:
> - move phy-connection-type to controller node instead of PHY node
>    (Reported by Sergei Shtylyov)
>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: "Antoine Ténart" <antoine.tenart@free-electrons.com>
> Cc: Florian Fainelli <f.fainelli@gmail.com>
> Cc: Eric Miao <eric.y.miao@gmail.com>
> Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: netdev@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
>   arch/arm/boot/dts/berlin2.dtsi | 36 ++++++++++++++++++++++++++++++++++++
>   1 file changed, 36 insertions(+)
>
> diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
> index 9d7c810ebd0b..dc0227dfc691 100644
> --- a/arch/arm/boot/dts/berlin2.dtsi
> +++ b/arch/arm/boot/dts/berlin2.dtsi
> @@ -79,11 +79,47 @@
>   			clocks = <&chip CLKID_TWD>;
>   		};
>
> +		eth1: ethernet@b90000 {
> +			compatible = "marvell,pxa168-eth";
> +			reg = <0xb90000 0x10000>;
> +			clocks = <&chip CLKID_GETH1>;
> +			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> +			/* set by bootloader */
> +			local-mac-address = [00 00 00 00 00 00];
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			phy-connection-type = "mii";
> +			phy-handle = <&ethphy1>;
> +			status = "disabled";
> +
> +			ethphy1: ethernet-phy@0 {
> +				reg = <0>;
> +			};
> +		};
> +
>   		cpu-ctrl@dd0000 {
>   			compatible = "marvell,berlin-cpu-ctrl";
>   			reg = <0xdd0000 0x10000>;
>   		};
>
> +		eth0: ethernet@e50000 {
> +			compatible = "marvell,pxa168-eth";
> +			reg = <0xe50000 0x10000>;
> +			clocks = <&chip CLKID_GETH0>;
> +			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> +			/* set by bootloader */
> +			local-mac-address = [00 00 00 00 00 00];
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			phy-connection-type = "mii";
> +			phy-handle = <&ethphy0>;
> +			status = "disabled";
> +
> +			ethphy0: ethernet-phy@0 {
> +				reg = <0>;
> +			};
> +		};
> +
>   		apb@e80000 {
>   			compatible = "simple-bus";
>   			#address-cells = <1>;
>

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 9d7c810ebd0b..dc0227dfc691 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -79,11 +79,47 @@ 
 			clocks = <&chip CLKID_TWD>;
 		};
 
+		eth1: ethernet@b90000 {
+			compatible = "marvell,pxa168-eth";
+			reg = <0xb90000 0x10000>;
+			clocks = <&chip CLKID_GETH1>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			/* set by bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy-connection-type = "mii";
+			phy-handle = <&ethphy1>;
+			status = "disabled";
+
+			ethphy1: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
 		cpu-ctrl@dd0000 {
 			compatible = "marvell,berlin-cpu-ctrl";
 			reg = <0xdd0000 0x10000>;
 		};
 
+		eth0: ethernet@e50000 {
+			compatible = "marvell,pxa168-eth";
+			reg = <0xe50000 0x10000>;
+			clocks = <&chip CLKID_GETH0>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			/* set by bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy-connection-type = "mii";
+			phy-handle = <&ethphy0>;
+			status = "disabled";
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
 		apb@e80000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;