Message ID | 1408573078-9320-4-git-send-email-mark.einon@gmail.com |
---|---|
State | Changes Requested, archived |
Delegated to: | David Miller |
Headers | show |
On Wed, Aug 20, 2014 at 11:17:53PM +0100, Mark Einon wrote: > Replace a long list of contiguous writel() calls with a for loop iterating > over the same values. > > Signed-off-by: Mark Einon <mark.einon@gmail.com> > --- > drivers/staging/et131x/et131x.c | 27 +++------------------------ > 1 file changed, 3 insertions(+), 24 deletions(-) > > diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c > index fffe763..44cc684 100644 > --- a/drivers/staging/et131x/et131x.c > +++ b/drivers/staging/et131x/et131x.c > @@ -1138,6 +1138,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter) > u32 sa_lo; > u32 sa_hi = 0; > u32 pf_ctrl = 0; > + u32 *wolw; > > /* Disable the MAC while it is being configured (also disable WOL) */ > writel(0x8, &rxmac->ctrl); > @@ -1151,30 +1152,8 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter) > * its default Values of 0x00000000 because there are not WOL masks > * as of this time. > */ > - writel(0, &rxmac->mask0_word0); > - writel(0, &rxmac->mask0_word1); > - writel(0, &rxmac->mask0_word2); > - writel(0, &rxmac->mask0_word3); > - > - writel(0, &rxmac->mask1_word0); > - writel(0, &rxmac->mask1_word1); > - writel(0, &rxmac->mask1_word2); > - writel(0, &rxmac->mask1_word3); > - > - writel(0, &rxmac->mask2_word0); > - writel(0, &rxmac->mask2_word1); > - writel(0, &rxmac->mask2_word2); > - writel(0, &rxmac->mask2_word3); > - > - writel(0, &rxmac->mask3_word0); > - writel(0, &rxmac->mask3_word1); > - writel(0, &rxmac->mask3_word2); > - writel(0, &rxmac->mask3_word3); > - > - writel(0, &rxmac->mask4_word0); > - writel(0, &rxmac->mask4_word1); > - writel(0, &rxmac->mask4_word2); > - writel(0, &rxmac->mask4_word3); > + for (wolw = &rxmac->mask0_word0; wolw <= &rxmac->mask4_word3; wolw++) > + writel(0, wolw); You are now only writing to all locations 1 time, instead of 4 times, like before, are you sure that is ok? Hardware is flaky, sometimes it wants to be written to multiple times... greg k-h -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, Aug 30, 2014 at 01:32:16PM -0700, Greg KH wrote: > On Wed, Aug 20, 2014 at 11:17:53PM +0100, Mark Einon wrote: > > Replace a long list of contiguous writel() calls with a for loop iterating > > over the same values. > > > > Signed-off-by: Mark Einon <mark.einon@gmail.com> > > --- > > drivers/staging/et131x/et131x.c | 27 +++------------------------ > > 1 file changed, 3 insertions(+), 24 deletions(-) > > > > diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c > > index fffe763..44cc684 100644 > > --- a/drivers/staging/et131x/et131x.c > > +++ b/drivers/staging/et131x/et131x.c > > @@ -1138,6 +1138,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter) > > u32 sa_lo; > > u32 sa_hi = 0; > > u32 pf_ctrl = 0; > > + u32 *wolw; > > > > /* Disable the MAC while it is being configured (also disable WOL) */ > > writel(0x8, &rxmac->ctrl); > > @@ -1151,30 +1152,8 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter) > > * its default Values of 0x00000000 because there are not WOL masks > > * as of this time. > > */ > > - writel(0, &rxmac->mask0_word0); > > - writel(0, &rxmac->mask0_word1); > > - writel(0, &rxmac->mask0_word2); > > - writel(0, &rxmac->mask0_word3); > > - > > - writel(0, &rxmac->mask1_word0); > > - writel(0, &rxmac->mask1_word1); > > - writel(0, &rxmac->mask1_word2); > > - writel(0, &rxmac->mask1_word3); > > - > > - writel(0, &rxmac->mask2_word0); > > - writel(0, &rxmac->mask2_word1); > > - writel(0, &rxmac->mask2_word2); > > - writel(0, &rxmac->mask2_word3); > > - > > - writel(0, &rxmac->mask3_word0); > > - writel(0, &rxmac->mask3_word1); > > - writel(0, &rxmac->mask3_word2); > > - writel(0, &rxmac->mask3_word3); > > - > > - writel(0, &rxmac->mask4_word0); > > - writel(0, &rxmac->mask4_word1); > > - writel(0, &rxmac->mask4_word2); > > - writel(0, &rxmac->mask4_word3); > > + for (wolw = &rxmac->mask0_word0; wolw <= &rxmac->mask4_word3; wolw++) > > + writel(0, wolw); > > You are now only writing to all locations 1 time, instead of 4 times, > like before, are you sure that is ok? Hardware is flaky, sometimes it > wants to be written to multiple times... Hi Greg, Thanks for the review. As far as my understanding goes, the new code is equivalent to the old code - it's a little confusing that the name refers to a word, but the masks are all 32 bit values, and the loop iterates over the contiguous list of masks found in txmac_regs (et131x.h:891 - the masks are also unused in the driver after being set). Or am I missing something here? Cheers, Mark -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sun, Aug 31, 2014 at 03:25:03PM +0100, Mark Einon wrote: > On Sat, Aug 30, 2014 at 01:32:16PM -0700, Greg KH wrote: > > On Wed, Aug 20, 2014 at 11:17:53PM +0100, Mark Einon wrote: > > > Replace a long list of contiguous writel() calls with a for loop iterating > > > over the same values. > > > > > > Signed-off-by: Mark Einon <mark.einon@gmail.com> > > > --- > > > drivers/staging/et131x/et131x.c | 27 +++------------------------ > > > 1 file changed, 3 insertions(+), 24 deletions(-) > > > > > > diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c > > > index fffe763..44cc684 100644 > > > --- a/drivers/staging/et131x/et131x.c > > > +++ b/drivers/staging/et131x/et131x.c > > > @@ -1138,6 +1138,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter) > > > u32 sa_lo; > > > u32 sa_hi = 0; > > > u32 pf_ctrl = 0; > > > + u32 *wolw; > > > > > > /* Disable the MAC while it is being configured (also disable WOL) */ > > > writel(0x8, &rxmac->ctrl); > > > @@ -1151,30 +1152,8 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter) > > > * its default Values of 0x00000000 because there are not WOL masks > > > * as of this time. > > > */ > > > - writel(0, &rxmac->mask0_word0); > > > - writel(0, &rxmac->mask0_word1); > > > - writel(0, &rxmac->mask0_word2); > > > - writel(0, &rxmac->mask0_word3); > > > - > > > - writel(0, &rxmac->mask1_word0); > > > - writel(0, &rxmac->mask1_word1); > > > - writel(0, &rxmac->mask1_word2); > > > - writel(0, &rxmac->mask1_word3); > > > - > > > - writel(0, &rxmac->mask2_word0); > > > - writel(0, &rxmac->mask2_word1); > > > - writel(0, &rxmac->mask2_word2); > > > - writel(0, &rxmac->mask2_word3); > > > - > > > - writel(0, &rxmac->mask3_word0); > > > - writel(0, &rxmac->mask3_word1); > > > - writel(0, &rxmac->mask3_word2); > > > - writel(0, &rxmac->mask3_word3); > > > - > > > - writel(0, &rxmac->mask4_word0); > > > - writel(0, &rxmac->mask4_word1); > > > - writel(0, &rxmac->mask4_word2); > > > - writel(0, &rxmac->mask4_word3); > > > + for (wolw = &rxmac->mask0_word0; wolw <= &rxmac->mask4_word3; wolw++) > > > + writel(0, wolw); > > > > You are now only writing to all locations 1 time, instead of 4 times, > > like before, are you sure that is ok? Hardware is flaky, sometimes it > > wants to be written to multiple times... > > Hi Greg, > > Thanks for the review. > > As far as my understanding goes, the new code is equivalent to the old > code - it's a little confusing that the name refers to a word, but the > masks are all 32 bit values, and the loop iterates over the contiguous > list of masks found in txmac_regs (et131x.h:891 - the masks are also > unused in the driver after being set). > > Or am I missing something here? No, I was wrong, sorry, your explanation makes sense, sorry for the noise. greg k-h -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/staging/et131x/et131x.c b/drivers/staging/et131x/et131x.c index fffe763..44cc684 100644 --- a/drivers/staging/et131x/et131x.c +++ b/drivers/staging/et131x/et131x.c @@ -1138,6 +1138,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter) u32 sa_lo; u32 sa_hi = 0; u32 pf_ctrl = 0; + u32 *wolw; /* Disable the MAC while it is being configured (also disable WOL) */ writel(0x8, &rxmac->ctrl); @@ -1151,30 +1152,8 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter) * its default Values of 0x00000000 because there are not WOL masks * as of this time. */ - writel(0, &rxmac->mask0_word0); - writel(0, &rxmac->mask0_word1); - writel(0, &rxmac->mask0_word2); - writel(0, &rxmac->mask0_word3); - - writel(0, &rxmac->mask1_word0); - writel(0, &rxmac->mask1_word1); - writel(0, &rxmac->mask1_word2); - writel(0, &rxmac->mask1_word3); - - writel(0, &rxmac->mask2_word0); - writel(0, &rxmac->mask2_word1); - writel(0, &rxmac->mask2_word2); - writel(0, &rxmac->mask2_word3); - - writel(0, &rxmac->mask3_word0); - writel(0, &rxmac->mask3_word1); - writel(0, &rxmac->mask3_word2); - writel(0, &rxmac->mask3_word3); - - writel(0, &rxmac->mask4_word0); - writel(0, &rxmac->mask4_word1); - writel(0, &rxmac->mask4_word2); - writel(0, &rxmac->mask4_word3); + for (wolw = &rxmac->mask0_word0; wolw <= &rxmac->mask4_word3; wolw++) + writel(0, wolw); /* Lets setup the WOL Source Address */ sa_lo = (adapter->addr[2] << ET_RX_WOL_LO_SA3_SHIFT) |
Replace a long list of contiguous writel() calls with a for loop iterating over the same values. Signed-off-by: Mark Einon <mark.einon@gmail.com> --- drivers/staging/et131x/et131x.c | 27 +++------------------------ 1 file changed, 3 insertions(+), 24 deletions(-)