diff mbox

[v2,3/9] net: mvneta: Check tx queue setup error in mvneta_change_mtu()

Message ID 1399396858-14551-4-git-send-email-ezequiel.garcia@free-electrons.com
State Changes Requested, archived
Delegated to: David Miller
Headers show

Commit Message

Ezequiel Garcia May 6, 2014, 5:20 p.m. UTC 
This commit checks the return code of mvneta_setup_txq() call
in mvneta_change_mtu(). Also, use the netdevice pointer directly
instead of dereferencing the port structure. While here, let's
fix a tiny comment typo.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
---
 drivers/net/ethernet/marvell/mvneta.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index d73ed91..743503a 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2275,24 +2275,28 @@  static int mvneta_change_mtu(struct net_device *dev, int mtu)
 		return 0;
 
 	/* The interface is running, so we have to force a
-	 * reallocation of the RXQs
+	 * reallocation of the queues
 	 */
 	mvneta_stop_dev(pp);
 
 	mvneta_cleanup_txqs(pp);
 	mvneta_cleanup_rxqs(pp);
 
-	pp->pkt_size = MVNETA_RX_PKT_SIZE(pp->dev->mtu);
+	pp->pkt_size = MVNETA_RX_PKT_SIZE(dev->mtu);
 	pp->frag_size = SKB_DATA_ALIGN(MVNETA_RX_BUF_SIZE(pp->pkt_size)) +
 	                SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
 
 	ret = mvneta_setup_rxqs(pp);
 	if (ret) {
-		netdev_err(pp->dev, "unable to setup rxqs after MTU change\n");
+		netdev_err(dev, "unable to setup rxqs after MTU change\n");
 		return ret;
 	}
 
-	mvneta_setup_txqs(pp);
+	ret = mvneta_setup_txqs(pp);
+	if (ret) {
+		netdev_err(dev, "unable to setup txqs after MTU change\n");
+		return ret;
+	}
 
 	mvneta_start_dev(pp);
 	mvneta_port_up(pp);