diff mbox

[08/11] net: ll_temac: Do not use fixed mtu size

Message ID 1349374497-9540-8-git-send-email-monstr@monstr.eu
State Not Applicable, archived
Delegated to: David Miller
Headers show

Commit Message

Michal Simek Oct. 4, 2012, 6:14 p.m. UTC 
Use max mtu instead.

Signed-off-by: Michal Simek <monstr@monstr.eu>
CC: Anirudha Sarangi <anirudh@xilinx.com>
CC: John Linn <John.Linn@xilinx.com>
CC: Grant Likely <grant.likely@secretlab.ca>
CC: Rob Herring <rob.herring@calxeda.com>
CC: David S. Miller <davem@davemloft.net>
---
 drivers/net/ethernet/xilinx/ll_temac_main.c |   14 +++++++-------
 1 files changed, 7 insertions(+), 7 deletions(-)

Comments

Ben Hutchings Oct. 4, 2012, 7:22 p.m. UTC | #1 
On Thu, 2012-10-04 at 20:14 +0200, Michal Simek wrote:
> Use max mtu instead.
[...]

MTU does not include the Ethernet header so I have no idea how this is
expected to work...

Ben.
Michal Simek Oct. 5, 2012, 5:58 a.m. UTC | #2 
On 10/04/2012 09:22 PM, Ben Hutchings wrote:
> On Thu, 2012-10-04 at 20:14 +0200, Michal Simek wrote:
>> Use max mtu instead.
> [...]
>
> MTU does not include the Ethernet header so I have no idea how this is
> expected to work...

Right. This is wrong fix. It should be the same as is in axienet.
There is max_frm_size used which is mtu+header+tailer.
I will fix it.

Thanks,
Michal
diff mbox

Patch

diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index 8786d92..8bafa15 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -212,7 +212,7 @@  static void temac_dma_bd_release(struct net_device *ndev)
 			break;
 		else {
 			dma_unmap_single(ndev->dev.parent, lp->rx_bd_v[i].phys,
-					XTE_MAX_JUMBO_FRAME_SIZE, DMA_FROM_DEVICE);
+					ndev->mtu, DMA_FROM_DEVICE);
 			dev_kfree_skb(lp->rx_skb[i]);
 		}
 	}
@@ -274,7 +274,7 @@  static int temac_dma_bd_init(struct net_device *ndev)
 				sizeof(*lp->rx_bd_v) * ((i + 1) % RX_BD_NUM);
 
 		skb = netdev_alloc_skb_ip_align(ndev,
-						XTE_MAX_JUMBO_FRAME_SIZE);
+						ndev->mtu);
 
 		if (skb == 0) {
 			dev_err(&ndev->dev, "alloc_skb error %d\n", i);
@@ -284,9 +284,9 @@  static int temac_dma_bd_init(struct net_device *ndev)
 		/* returns physical address of skb->data */
 		lp->rx_bd_v[i].phys = dma_map_single(ndev->dev.parent,
 						     skb->data,
-						     XTE_MAX_JUMBO_FRAME_SIZE,
+						     ndev->mtu,
 						     DMA_FROM_DEVICE);
-		lp->rx_bd_v[i].len = XTE_MAX_JUMBO_FRAME_SIZE;
+		lp->rx_bd_v[i].len = ndev->mtu;
 		lp->rx_bd_v[i].app0 = STS_CTRL_APP0_IRQONEND;
 	}
 
@@ -787,7 +787,7 @@  static void ll_temac_recv(struct net_device *ndev)
 		ndev->stats.rx_bytes += length;
 
 		new_skb = netdev_alloc_skb_ip_align(ndev,
-						XTE_MAX_JUMBO_FRAME_SIZE);
+						ndev->mtu);
 
 		if (new_skb == 0) {
 			dev_err(&ndev->dev, "no memory for new sk_buff\n");
@@ -797,9 +797,9 @@  static void ll_temac_recv(struct net_device *ndev)
 
 		cur_p->app0 = STS_CTRL_APP0_IRQONEND;
 		cur_p->phys = dma_map_single(ndev->dev.parent, new_skb->data,
-					     XTE_MAX_JUMBO_FRAME_SIZE,
+					     ndev->mtu,
 					     DMA_FROM_DEVICE);
-		cur_p->len = XTE_MAX_JUMBO_FRAME_SIZE;
+		cur_p->len = ndev->mtu;
 		lp->rx_skb[lp->rx_bd_ci] = new_skb;
 
 		lp->rx_bd_ci++;