| Message ID | 0d087ba428c7f43629161350baa479ff5af8b52d.1553089248.git.lukas@wunner.de |
|---|---|
| State | Accepted |
| Delegated to: | David Miller |
| Headers | show |
| Series | ks8851 fixes & cleanups | expand |
diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c index a93f8e842c07..1633fa5c709c 100644 --- a/drivers/net/ethernet/micrel/ks8851.c +++ b/drivers/net/ethernet/micrel/ks8851.c @@ -1554,9 +1554,9 @@ static int ks8851_probe(struct spi_device *spi) free_irq(ndev->irq, ks); err_irq: +err_id: if (gpio_is_valid(gpio)) gpio_set_value(gpio, 0); -err_id: regulator_disable(ks->vdd_reg); err_reg: regulator_disable(ks->vdd_io);
Commit 73fdeb82e963 ("net: ks8851: Add optional vdd_io regulator and reset gpio") amended the ks8851 driver to briefly assert the chip's reset pin on probe. It also amended the probe routine's error path to reassert the reset pin if a subsequent initialization step fails. However the commit misplaced reassertion of the reset pin in the error path such that it is not performed if the check of the Chip ID and Enable Register (CIDER) fails. The error path is therefore slightly asymmetrical to the probe routine's body. Fix it. Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Nishanth Menon <nm@ti.com> --- drivers/net/ethernet/micrel/ks8851.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)