mbox series

[russell-kings-net-queue,v2,0/3] Support for RollBall 10G copper SFP modules

Message ID 20201020150615.11969-1-kabel@kernel.org
Headers show
Series Support for RollBall 10G copper SFP modules | expand

Message

Marek Behún Oct. 20, 2020, 3:06 p.m. UTC 
Hi Russell,

this series should apply on linux-arm git repository, on branch
net-queue.

Some internet providers are already starting to offer 2.5G copper
connectivity to their users. On Turris Omnia the SFP port is capable
of 2.5G speed, so we tested some copper SFP modules.

This adds support to the SFP subsystem for 10G RollBall copper modules
which contain a Marvell 88X3310 PHY. By default these modules are
configured in 10GKR only mode on the host interface, and also contain
some bad information in EEPROM (the extended_cc byte).

The PHY in these modules is also accessed via a different I2C protocol
than the standard one.

Patch 1 adds support for this different I2C MDIO bus.
Patch 2 adds support for these modules into the SFP driver.
Patch 3 changes phylink code so that a PHY can be attached even though
802.3z mode is requested.

Marek

Marek Behún (3):
  net: phy: mdio-i2c: support I2C MDIO protocol for RollBall SFP modules
  net: phy: sfp: add support for multigig RollBall modules
  net: phylink: don't fail attaching phy on 1000base-x/2500base-x mode

 drivers/net/phy/mdio-i2c.c | 196 +++++++++++++++++++++++++++++++++++--
 drivers/net/phy/phylink.c  |   4 +-
 drivers/net/phy/sfp.c      |  69 +++++++++++--
 3 files changed, 250 insertions(+), 19 deletions(-)


base-commit: a32e90737c1c92653767d3c95c63c16b9b72c6c2