mbox series

[net-next,v2,0/4] enetc: Migrate to PHYLINK and PCS_LYNX

Message ID 20201007094823.6960-1-claudiu.manoil@nxp.com
Headers show
Series enetc: Migrate to PHYLINK and PCS_LYNX | expand

Message

Claudiu Manoil Oct. 7, 2020, 9:48 a.m. UTC 
Transitioning the enetc driver from phylib to phylink.
Offloading the serdes configuration to the PCS_LYNX
module is a mandatory part of this transition. Aiming
for a cleaner, more maintainable design, and better
code reuse.
The first 2 patches are clean up prerequisites.

Tested on a p1028rdb board.

v2: validate() explicitly rejects now all interface modes not
supported by the driver instead of relying on the device tree
to provide only supported interfaces, and dropped redundant
activation of pcs_poll (addressing Ioana's findings)

Claudiu Manoil (4):
  enetc: Clean up MAC and link configuration
  enetc: Clean up serdes configuration
  arm64: dts: fsl-ls1028a-rdb: Specify in-band mode for ENETC port 0
  enetc: Migrate to PHYLINK and PCS_LYNX

 .../boot/dts/freescale/fsl-ls1028a-rdb.dts    |   1 +
 drivers/net/ethernet/freescale/enetc/Kconfig  |   5 +-
 drivers/net/ethernet/freescale/enetc/enetc.c  |  53 ++-
 drivers/net/ethernet/freescale/enetc/enetc.h  |   9 +-
 .../ethernet/freescale/enetc/enetc_ethtool.c  |  26 +-
 .../net/ethernet/freescale/enetc/enetc_pf.c   | 335 ++++++++++--------
 .../net/ethernet/freescale/enetc/enetc_pf.h   |   8 +-
 .../net/ethernet/freescale/enetc/enetc_qos.c  |   9 +-
 8 files changed, 243 insertions(+), 203 deletions(-)

Comments

Jakub Kicinski Oct. 11, 2020, 6:08 p.m. UTC | #1 
On Wed,  7 Oct 2020 12:48:19 +0300 Claudiu Manoil wrote:
> Transitioning the enetc driver from phylib to phylink.
> Offloading the serdes configuration to the PCS_LYNX
> module is a mandatory part of this transition. Aiming
> for a cleaner, more maintainable design, and better
> code reuse.
> The first 2 patches are clean up prerequisites.
> 
> Tested on a p1028rdb board.
> 
> v2: validate() explicitly rejects now all interface modes not
> supported by the driver instead of relying on the device tree
> to provide only supported interfaces, and dropped redundant
> activation of pcs_poll (addressing Ioana's findings)

Applied, thank you!