mbox series

[0/2] Add Ethernet support for Intel Keem Bay SoC

Message ID 1594097238-8827-1-git-send-email-vineetha.g.jaya.kumaran@intel.com
Headers show
Series Add Ethernet support for Intel Keem Bay SoC | expand

Message

G Jaya Kumaran, Vineetha July 7, 2020, 4:47 a.m. UTC 
From: "Vineetha G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>

Hello,

This patch set enables support for Ethernet on the Intel Keem Bay SoC.
The first patch contains the required Device Tree bindings documentation, 
while the second patch adds the Intel platform glue layer for the stmmac
device driver.

This driver was tested on the Keem Bay evaluation module board.

Thank you.

Best regards,
Vineetha

Rusaimi Amira Ruslan (1):
  net: stmmac: Add dwmac-intel-plat for GBE driver

Vineetha G. Jaya Kumaran (1):
  dt-bindings: net: Add bindings for Intel Keem Bay

 .../devicetree/bindings/net/intel,dwmac-plat.yaml  | 123 +++++++++++++
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |  10 ++
 drivers/net/ethernet/stmicro/stmmac/Makefile       |   1 +
 .../net/ethernet/stmicro/stmmac/dwmac-intel-plat.c | 191 +++++++++++++++++++++
 4 files changed, 325 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c