@@ -1,5 +1,6 @@
#!/bin/sh
# Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved.
+# Copyright (c) 2017-2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) International Business Machines Corp., 2005
#
# This program is free software; you can redistribute it and/or
@@ -17,10 +18,10 @@
#
# Author: Mitsuru Chinen <mitch@jp.ibm.com>
-TST_TOTAL=2
-
+TST_CNT=2
+TST_SETUP="netstress_setup"
TST_CLEANUP="netstress_cleanup"
-
+TST_TESTFUNC="test_if_ip"
. test_net_stress.sh
# The interval of the check interface activity
@@ -33,7 +34,7 @@ test_body()
case $cmd_type in
if_cmd) local cmd_name='ifconfig' ;;
ip_cmd) local cmd_name='ip' ;;
- *) tst_brkm TBROK "Unknown test parameter '$cmd_type'"
+ *) tst_brk TBROK "Unknown test parameter '$cmd_type'"
esac
local num=$(($(od -A n -t u1 -N 1 /dev/random) * 253 / 255 + 2 ))
@@ -46,10 +47,10 @@ test_body()
local netmask=24
fi
- tst_resm TINFO "'$cmd_name' add/del IPv$ipver '$new_ip' $NS_TIMES times"
+ tst_res TINFO "'$cmd_name' add/del IPv$ipver '$new_ip' $NS_TIMES times"
if ! restore_ipaddr; then
- tst_resm TBROK "Failed to set default IP addresses"
+ tst_res TBROK "Failed to set default IP addresses"
return
fi
@@ -69,14 +70,14 @@ test_body()
esac
if [ $? -ne 0 ]; then
- tst_resm TFAIL "command failed to add $new_ip to $iface"
+ tst_res TFAIL "command failed to add $new_ip to $iface"
return
fi
ip addr show $iface | grep -q $new_ip
if [ $? -ne 0 ]; then
ip addr show $iface
- tst_resm TFAIL "$new_ip not configured"
+ tst_res TFAIL "$new_ip not configured"
return
fi
@@ -96,26 +97,20 @@ test_body()
esac
if [ $? -ne 0 ]; then
- tst_resm TFAIL " delete command failed".
+ tst_res TFAIL " delete command failed".
return
fi
ip addr show $iface | grep -q $new_ip
if [ $? -eq 0 ]; then
ip addr show $iface
- tst_resm TFAIL "Failed to remove '$new_ip' address"
+ tst_res TFAIL "Failed to remove '$new_ip' address"
return
fi
done
- tst_resm TPASS "Test is finished correctly"
+ tst_res TPASS "Test is finished correctly"
}
-netstress_setup
-
tst_check_cmds ifconfig
-
-test_body 'if_cmd'
-test_body 'ip_cmd'
-
-tst_exit
+tst_run
@@ -1,5 +1,6 @@
#!/bin/sh
# Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved.
+# Copyright (c) 2017-2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) International Business Machines Corp., 2005
#
# This program is free software; you can redistribute it and/or
@@ -17,10 +18,10 @@
#
# Author: Mitsuru Chinen <mitch@jp.ibm.com>
-TST_TOTAL=2
-
+TST_CNT=2
+TST_SETUP="netstress_setup"
TST_CLEANUP="netstress_cleanup"
-
+TST_TESTFUNC="test_if_ip"
. test_net_stress.sh
# The interval of the check interface activity
@@ -33,17 +34,17 @@ test_body()
case $cmd_type in
if_cmd) local cmd_name='ifconfig' ;;
ip_cmd) local cmd_name='ip' ;;
- *) tst_brkm TBROK "Unknown test parameter '$cmd_type'"
+ *) tst_brk TBROK "Unknown test parameter '$cmd_type'"
esac
local iface=$(tst_iface)
[ "$TST_IPV6" ] && local netmask=64 || local netmask=16
- tst_resm TINFO "'$cmd_name' add $IP_TOTAL IPv$ipver addresses"
- tst_resm TINFO "check interval that $iface is working: $CHECK_INTERVAL"
+ tst_res TINFO "'$cmd_name' add $IP_TOTAL IPv$ipver addresses"
+ tst_res TINFO "check interval that $iface is working: $CHECK_INTERVAL"
if ! restore_ipaddr; then
- tst_resm TBROK "Failed to set default IP addresses"
+ tst_res TBROK "Failed to set default IP addresses"
return
fi
@@ -54,7 +55,7 @@ test_body()
[ "$TST_IPV6" ] && local xymax=65535 || xymax=254
if [ $IP_TOTAL -gt $((xymax * xymax)) ]; then
- tst_resm TWARN "set IP_TOTAL to $xymax * $xymax"
+ tst_res TWARN "set IP_TOTAL to $xymax * $xymax"
IP_TOTAL=$((xymax * xymax))
fi
@@ -81,14 +82,14 @@ test_body()
esac
if [ $? -ne 0 ]; then
- tst_resm TFAIL "command failed to add $new_ip to $iface"
+ tst_res TFAIL "command failed to add $new_ip to $iface"
return
fi
ip addr show $iface | grep -q $new_ip
if [ $? -ne 0 ]; then
ip addr show $iface
- tst_resm TFAIL "$new_ip not configured"
+ tst_res TFAIL "$new_ip not configured"
return
fi
@@ -106,14 +107,14 @@ test_body()
esac
if [ $? -ne 0 ]; then
- tst_resm TFAIL " delete command failed".
+ tst_res TFAIL " delete command failed".
return
fi
ip addr show $iface | grep -q $new_ip
if [ $? -eq 0 ]; then
ip addr show $iface
- tst_resm TFAIL "Failed to remove '$new_ip' address"
+ tst_res TFAIL "Failed to remove '$new_ip' address"
return
fi
@@ -123,19 +124,13 @@ test_body()
y=1
x=$(($x + 1))
if [ $x -gt $xymax ]; then
- tst_brkm TBROK "Too large $IP_TOTAL"
+ tst_brk TBROK "Too large $IP_TOTAL"
fi
fi
done
- tst_resm TPASS "Test is finished correctly"
+ tst_res TPASS "Test is finished correctly"
}
-netstress_setup
-
tst_check_cmds ifconfig
-
-test_body 'if_cmd'
-test_body 'ip_cmd'
-
-tst_exit
+tst_run
@@ -1,5 +1,6 @@
#!/bin/sh
# Copyright (c) 2015-2017 Oracle and/or its affiliates. All Rights Reserved.
+# Copyright (c) 2017-2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) International Business Machines Corp., 2005
#
# This program is free software; you can redistribute it and/or
@@ -17,10 +18,10 @@
#
# Author: Mitsuru Chinen <mitch@jp.ibm.com>
-TST_TOTAL=2
-
+TST_CNT=2
+TST_SETUP="netstress_setup"
TST_CLEANUP="do_cleanup"
-
+TST_TESTFUNC="test_if_ip"
. test_net_stress.sh
# The interval of the mtu change [second]
@@ -52,14 +53,14 @@ test_body()
case $cmd_type in
if_cmd) local cmd_name='ifconfig' ;;
ip_cmd) local cmd_name='ip' ;;
- *) tst_brkm TBROK "Unknown test parameter '$cmd_type'"
+ *) tst_brk TBROK "Unknown test parameter '$cmd_type'"
esac
local iface=$(tst_iface)
local iface_rmt=$(tst_iface rhost)
[ "$TST_IPV6" ] && local netmask=64 || local netmask=16
- tst_resm TINFO "'$cmd_name changes MTU $MTU_CHANGE_TIMES times" \
+ tst_res TINFO "'$cmd_name changes MTU $MTU_CHANGE_TIMES times" \
"every $CHANGE_INTERVAL seconds"
mtu_array_len=$(echo $CHANGE_VALUES | wc -w)
@@ -73,7 +74,7 @@ test_body()
make_background_tcp_traffic
- tst_resm TINFO "set MTU to $mtu $cnt/$MTU_CHANGE_TIMES"
+ tst_res TINFO "set MTU to $mtu $cnt/$MTU_CHANGE_TIMES"
local ret=0
case $cmd_type in
if_cmd) ifconfig $iface mtu $mtu || ret=1
@@ -85,7 +86,7 @@ test_body()
esac
if [ $? -ne 0 -o $ret -ne 0 ]; then
- tst_resm TFAIL "Failed to change the mtu at $cnt time"
+ tst_res TFAIL "Failed to change the mtu at $cnt time"
return
fi
@@ -95,13 +96,6 @@ test_body()
done
}
-netstress_setup
-
tst_check_cmds ifconfig
-
saved_mtu="$(cat /sys/class/net/$(tst_iface)/mtu)"
-
-test_body 'if_cmd'
-test_body 'ip_cmd'
-
-tst_exit
+tst_run
@@ -17,10 +17,10 @@
#
# Author: Mitsuru Chinen <mitch@jp.ibm.com>
-TST_TOTAL=2
-
+TST_CNT=2
+TST_SETUP="netstress_setup"
TST_CLEANUP="netstress_cleanup"
-
+TST_TESTFUNC="test_rt_ip"
. test_net_stress.sh
CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))}
@@ -32,7 +32,7 @@ test_body()
case $cmd_type in
rt_cmd) local cmd_name='route' ;;
ip_cmd) local cmd_name='ip' ;;
- *) tst_brkm TBROK "Unknown test parameter '$cmd_type'"
+ *) tst_brk TBROK "Unknown test parameter '$cmd_type'"
esac
local iface=$(tst_iface)
@@ -50,10 +50,10 @@ test_body()
esac
fi
- tst_resm TINFO "'$cmd_name' add/del ${new_rt}${opt_rt} $NS_TIMES times"
+ tst_res TINFO "'$cmd_name' add/del ${new_rt}${opt_rt} $NS_TIMES times"
if ! restore_ipaddr; then
- tst_resm TBROK "Failed to set default IP addresses"
+ tst_res TBROK "Failed to set default IP addresses"
return
fi
@@ -66,7 +66,7 @@ test_body()
ip_cmd) ip route add ${new_rt}${opt_rt} dev $iface ;;
esac
if [ $? -ne 0 ]; then
- tst_resm TFAIL "Can't add route $new_rt to $iface"
+ tst_res TFAIL "Can't add route $new_rt to $iface"
return
fi
@@ -75,7 +75,7 @@ test_body()
ip_cmd) ip route del ${new_rt}${opt_rt} dev $iface ;;
esac
if [ $? -ne 0 ]; then
- tst_resm TFAIL "Can't del route $new_rt from $iface"
+ tst_res TFAIL "Can't del route $new_rt from $iface"
return
fi
@@ -84,14 +84,8 @@ test_body()
cnt=$(($cnt + 1))
done
- tst_resm TPASS "Test is finished correctly"
+ tst_res TPASS "Test is finished correctly"
}
-netstress_setup
-
tst_check_cmds route
-
-test_body 'rt_cmd'
-test_body 'ip_cmd'
-
-tst_exit
+tst_run
@@ -17,10 +17,10 @@
#
# Author: Mitsuru Chinen <mitch@jp.ibm.com>
-TST_TOTAL=2
-
+TST_CNT=2
+TST_SETUP="netstress_setup"
TST_CLEANUP="netstress_cleanup"
-
+TST_TESTFUNC="test_rt_ip"
. test_net_stress.sh
CHECK_INTERVAL=${CHECK_INTERVAL:-$(($ROUTE_TOTAL / 20))}
@@ -32,7 +32,7 @@ test_body()
case $cmd_type in
rt_cmd) local cmd_name='route' ;;
ip_cmd) local cmd_name='ip' ;;
- *) tst_brkm TBROK "Unknown test parameter '$cmd_type'"
+ *) tst_brk TBROK "Unknown test parameter '$cmd_type'"
esac
local iface=$(tst_iface)
@@ -47,10 +47,10 @@ test_body()
esac
fi
- tst_resm TINFO "'$cmd_name' add IPv$ipver $ROUTE_TOTAL routes"
+ tst_res TINFO "'$cmd_name' add IPv$ipver $ROUTE_TOTAL routes"
if ! restore_ipaddr; then
- tst_resm TBROK "Failed to set default IP addresses"
+ tst_res TBROK "Failed to set default IP addresses"
return
fi
@@ -61,7 +61,7 @@ test_body()
[ "$TST_IPV6" ] && local xymax=65535 || xymax=254
if [ $ROUTE_TOTAL -gt $((xymax * xymax)) ]; then
- tst_resm TWARN "set ROUTE_TOTAL to $xymax * $xymax"
+ tst_res TWARN "set ROUTE_TOTAL to $xymax * $xymax"
ROUTE_TOTAL=$((xymax * xymax))
fi
@@ -81,7 +81,7 @@ test_body()
ip_cmd) ip route add ${new_rt}${opt_rt} dev $iface ;;
esac
if [ $? -ne 0 ]; then
- tst_resm TFAIL "Can't add route $new_rt to $iface"
+ tst_res TFAIL "Can't add route $new_rt to $iface"
return
fi
@@ -93,19 +93,13 @@ test_body()
y=1
x=$(($x + 1))
if [ $x -gt $xymax ]; then
- tst_brkm TBROK "Too large $ROUTE_TOTAL"
+ tst_brk TBROK "Too large $ROUTE_TOTAL"
fi
fi
done
- tst_resm TPASS "Test is finished correctly"
+ tst_res TPASS "Test is finished correctly"
}
-netstress_setup
-
tst_check_cmds route
-
-test_body 'rt_cmd'
-test_body 'ip_cmd'
-
-tst_exit
+tst_run
@@ -1,5 +1,6 @@
#!/bin/sh
# Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved.
+# Copyright (c) 2017-2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) International Business Machines Corp., 2005
#
# This program is free software; you can redistribute it and/or
@@ -17,10 +18,10 @@
#
# Author: Mitsuru Chinen <mitch@jp.ibm.com>
-TST_TOTAL=2
-
+TST_CNT=2
+TST_SETUP="netstress_setup"
TST_CLEANUP="netstress_cleanup"
-
+TST_TESTFUNC="test_if_ip"
. test_net_stress.sh
CHECK_INTERVAL=${CHECK_INTERVAL:-$(($IF_UPDOWN_TIMES / 20))}
@@ -32,13 +33,13 @@ test_body()
case $cmd_type in
if_cmd) local cmd_name='ifconfig' ;;
ip_cmd) local cmd_name='ip' ;;
- *) tst_brkm TBROK "Unknown test parameter '$cmd_type'"
+ *) tst_brk TBROK "Unknown test parameter '$cmd_type'"
esac
local iface=$(tst_iface)
- tst_resm TINFO "'$cmd_name ups/downs $iface $IF_UPDOWN_TIMES times"
- tst_resm TINFO "check connectivity interval is $CHECK_INTERVAL"
+ tst_res TINFO "'$cmd_name ups/downs $iface $IF_UPDOWN_TIMES times"
+ tst_res TINFO "check connectivity interval is $CHECK_INTERVAL"
local cnt=1
while [ $cnt -le $IF_UPDOWN_TIMES ]; do
@@ -47,7 +48,7 @@ test_body()
ip_cmd) ip link set $iface down ;;
esac
if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to down $iface"
+ tst_res TFAIL "Failed to down $iface"
return
fi
@@ -56,7 +57,7 @@ test_body()
ip_cmd) ip link set $iface up ;;
esac
if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to up $iface"
+ tst_res TFAIL "Failed to up $iface"
return
fi
@@ -65,14 +66,8 @@ test_body()
cnt=$(($cnt + 1))
done
- tst_resm TPASS "Test is finished correctly"
+ tst_res TPASS "Test is finished correctly"
}
-netstress_setup
-
tst_check_cmds ifconfig
-
-test_body 'if_cmd'
-test_body 'ip_cmd'
-
-tst_exit
+tst_run
@@ -1,5 +1,6 @@
#!/bin/sh
# Copyright (c) 2015-2016 Oracle and/or its affiliates. All Rights Reserved.
+# Copyright (c) 2017-2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) International Business Machines Corp., 2005
#
# This program is free software; you can redistribute it and/or
@@ -17,23 +18,30 @@
#
# Author: Mitsuru Chinen <mitch@jp.ibm.com>
-TST_TOTAL=1
+TST_CNT=1
TCID=if4-addr-change
+TST_SETUP="do_setup"
TST_CLEANUP="do_cleanup"
-
+TST_USE_NEW_API=1
+TST_TESTFUNC="test_body"
. test_net.sh
CHECK_INTERVAL=${CHECK_INTERVAL:-$(($NS_TIMES / 20))}
# Maximum host portion of the IPv4 address on the local host
LHOST_IPV4_HOST_MAX="254"
+do_setup()
+{
+ tst_check_cmds ifconfig
+}
+
do_cleanup()
{
tst_restore_ipaddr
tst_wait_ipv6_dad
}
-trap "tst_brkm TBROK 'test interrupted'" INT
+trap "tst_brk TBROK 'test interrupted'" INT
test_body()
{
@@ -41,7 +49,7 @@ test_body()
local num=1
local add_to_net=
- tst_resm TINFO "ifconfig changes IPv4 address $NS_TIMES times"
+ tst_res TINFO "ifconfig changes IPv4 address $NS_TIMES times"
while [ $cnt -lt $NS_TIMES ]; do
# Define the network portion
@@ -53,7 +61,7 @@ test_body()
# check prefix and fix values for prefix != 24
add_to_net=
if [ $IPV4_LPREFIX -lt 8 -o $IPV4_LPREFIX -ge 32 ] ; then
- tst_brkm TCONF "test must be with prefix >= 8 and prefix < 32 ($IPV4_LPREFIX)"
+ tst_brk TCONF "test must be with prefix >= 8 and prefix < 32 ($IPV4_LPREFIX)"
elif [ $IPV4_LPREFIX -lt 16 ]; then # N.x.x.num
add_to_net=".0.1"
elif [ $IPV4_LPREFIX -lt 24 ]; then # N.N.x.num
@@ -69,14 +77,11 @@ test_body()
[ $CHECK_INTERVAL -eq 0 ] && continue
[ $(($cnt % $CHECK_INTERVAL)) -ne 0 ] && continue
- tst_resm TINFO "ping $(tst_ipaddr):$(tst_ipaddr rhost) ${cnt}/$NS_TIMES"
+ tst_res TINFO "ping $(tst_ipaddr):$(tst_ipaddr rhost) ${cnt}/$NS_TIMES"
tst_ping
done
tst_ping
}
-tst_check_cmds ifconfig
-test_body
-
-tst_exit
+tst_run
@@ -1,6 +1,6 @@
#!/bin/sh
# Copyright (c) International Business Machines Corp., 2006
-# Copyright (c) 2017 Petr Vorel <pvorel@suse.cz>
+# Copyright (c) 2017-2018 Petr Vorel <pvorel@suse.cz>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
@@ -21,19 +21,21 @@
. mcast-lib.sh
-tst_resm TINFO "joining $MCASTNUM_HEAVY IPv$ipver multicast groups on multiple sockets"
-
do_setup()
{
# Increase the maximum number of open file descriptors
if [ $(ulimit -n) -lt $MCASTNUM_HEAVY ]; then
- ulimit -n $MCASTNUM_HEAVY || tst_brkm TCONF \
+ ulimit -n $MCASTNUM_HEAVY || tst_brk TCONF \
"Failed to set the maximum number of open file descriptors to $MCASTNUM_HEAVY"
fi
mcast_setup $MCASTNUM_HEAVY
}
-do_setup
-do_multicast_test_multiple_join $MCASTNUM_HEAVY true
-tst_exit
+do_test()
+{
+ tst_res TINFO "joining $MCASTNUM_HEAVY IPv$ipver multicast groups on multiple sockets"
+ do_multicast_test_multiple_join $MCASTNUM_HEAVY true
+}
+
+tst_run
@@ -1,6 +1,6 @@
#!/bin/sh
# Copyright (c) International Business Machines Corp., 2006
-# Copyright (c) 2017 Petr Vorel <pvorel@suse.cz>
+# Copyright (c) 2017-2018 Petr Vorel <pvorel@suse.cz>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
@@ -21,8 +21,15 @@
. mcast-lib.sh
-tst_resm TINFO "joining and leaving the same IPv$ipver multicast group on $MCASTNUM_NORMAL sockets in $NS_TIMES times"
+do_setup()
+{
+ mcast_setup $MCASTNUM_NORMAL
+}
-mcast_setup $MCASTNUM_NORMAL
-do_multicast_test_join_leave $MCASTNUM_NORMAL
-tst_exit
+do_test()
+{
+ tst_res TINFO "joining and leaving the same IPv$ipver multicast group on $MCASTNUM_NORMAL sockets in $NS_TIMES times"
+ do_multicast_test_join_leave $MCASTNUM_NORMAL
+}
+
+tst_run
@@ -1,6 +1,6 @@
#!/bin/sh
# Copyright (c) International Business Machines Corp., 2006
-# Copyright (c) 2017 Petr Vorel <pvorel@suse.cz>
+# Copyright (c) 2017-2018 Petr Vorel <pvorel@suse.cz>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
@@ -21,8 +21,15 @@
. mcast-lib.sh
-tst_resm TINFO "joining $MCASTNUM_HEAVY IPv$ipver multicast groups on a single socket"
+do_setup()
+{
+ mcast_setup $MCASTNUM_HEAVY
+}
-mcast_setup $MCASTNUM_HEAVY
-do_multicast_test_multiple_join $MCASTNUM_HEAVY
-tst_exit
+do_test()
+{
+ tst_res TINFO "joining $MCASTNUM_HEAVY IPv$ipver multicast groups on a single socket"
+ do_multicast_test_multiple_join $MCASTNUM_HEAVY
+}
+
+tst_run
@@ -1,6 +1,6 @@
#!/bin/sh
# Copyright (c) International Business Machines Corp., 2006
-# Copyright (c) 2017 Petr Vorel <pvorel@suse.cz>
+# Copyright (c) 2017-2018 Petr Vorel <pvorel@suse.cz>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
@@ -21,8 +21,15 @@
. mcast-lib.sh
-tst_resm TINFO "joining and leaving the same IPv$ipver multicast group with a different source filters on $MCASTNUM_NORMAL sockets in $NS_TIMES times"
+do_setup()
+{
+ mcast_setup $MCASTNUM_NORMAL
+}
-mcast_setup $MCASTNUM_NORMAL
-do_multicast_test_join_leave $MCASTNUM_NORMAL true
-tst_exit
+do_test()
+{
+ tst_res TINFO "joining and leaving the same IPv$ipver multicast group with a different source filters on $MCASTNUM_NORMAL sockets in $NS_TIMES times"
+ do_multicast_test_join_leave $MCASTNUM_NORMAL true
+}
+
+tst_run
@@ -1,6 +1,6 @@
#!/bin/sh
# Copyright (c) International Business Machines Corp., 2006
-# Copyright (c) 2017 Petr Vorel <pvorel@suse.cz>
+# Copyright (c) 2017-2018 Petr Vorel <pvorel@suse.cz>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
@@ -19,9 +19,11 @@
#
# Setup script for multicast stress tests.
-TST_TOTAL=1
+TST_CNT=1
+TST_SETUP="do_setup"
TST_CLEANUP="mcast_cleanup"
-
+TST_TESTFUNC="do_test"
+TST_NEEDS_TMPDIR=1
. test_net_stress.sh
MCAST_LCMD="ns-mcast_join -f $ipver -I $(tst_iface)"
@@ -39,7 +41,7 @@ mcast_setup4()
SYSFS_FORCE_IGMP_VERSION=$(sysctl -b net.ipv4.conf.$(tst_iface).force_igmp_version)
SYSFS_ALL_FORCE_IGMP_VERSION=$(sysctl -b net.ipv4.conf.all.force_igmp_version)
- [ "$igmp_max_memberships" -gt 5459 ] && tst_resm TWARN \
+ [ "$igmp_max_memberships" -gt 5459 ] && tst_res TWARN \
"\$1 shouldn't be set higher than 5459 as it's used to set /proc/sys/net/ipv4/igmp_max_memberships"
ROD sysctl -qw net.ipv4.igmp_max_memberships=$igmp_max_memberships
@@ -67,7 +69,6 @@ mcast_setup()
local max="$1"
netstress_setup
- tst_tmpdir
[ "$TST_IPV6" ] && mcast_setup6 || mcast_setup4 $max
}
@@ -110,7 +111,7 @@ do_multicast_test_multiple_join()
# Run a multicast join tool
tmpfile=$$
EXPECT_PASS $MCAST_LCMD $param_multi_socket -n $num -p $mprefix \> $tmpfile
- tst_resm TINFO "joined $(grep groups $tmpfile)"
+ tst_res TINFO "joined $(grep groups $tmpfile)"
# Send MLD / IGMP General Query from the remote host
if [ "$TST_IPV6" ]; then
@@ -150,5 +151,5 @@ do_multicast_test_join_leave()
wait
- tst_resm TPASS "test is finished successfully"
+ tst_res TPASS "test is finished successfully"
}
@@ -1,7 +1,7 @@
#!/bin/sh
# Copyright (c) International Business Machines Corp., 2006
# Copyright (c) 2015-2017 Oracle and/or its affiliates. All Rights Reserved.
-# Copyright (c) 2017 Petr Vorel <pvorel@suse.cz>
+# Copyright (c) 2017-2018 Petr Vorel <pvorel@suse.cz>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
@@ -25,6 +25,7 @@
export TCID="${TCID:-$(basename $0)}"
+TST_USE_NEW_API=1
. test_net.sh
ipver=${TST_IPV6:-4}
@@ -124,3 +125,19 @@ make_background_tcp_traffic()
netstress -R 3 -g $port > /dev/null 2>&1 &
tst_rhost_run -b -c "netstress -l -H $ip -g $port"
}
+
+test_if_ip()
+{
+ case $1 in
+ 1) test_body 'if_cmd';;
+ 2) test_body 'ip_cmd';;
+ esac
+}
+
+test_rt_ip()
+{
+ case $1 in
+ 1) test_body 'rt_cmd';;
+ 2) test_body 'ip_cmd';;
+ esac
+}
Signed-off-by: Petr Vorel <pvorel@suse.cz> --- testcases/network/stress/interface/if-addr-adddel | 31 ++++++++---------- .../network/stress/interface/if-addr-addlarge | 37 ++++++++++------------ testcases/network/stress/interface/if-mtu-change | 24 ++++++-------- testcases/network/stress/interface/if-route-adddel | 26 ++++++--------- .../network/stress/interface/if-route-addlarge | 28 +++++++--------- testcases/network/stress/interface/if-updown | 27 +++++++--------- testcases/network/stress/interface/if4-addr-change | 25 +++++++++------ .../grp-operation/mcast-group-multiple-socket | 16 ++++++---- .../multicast/grp-operation/mcast-group-same-group | 17 +++++++--- .../grp-operation/mcast-group-single-socket | 17 +++++++--- .../grp-operation/mcast-group-source-filter | 17 +++++++--- .../stress/multicast/grp-operation/mcast-lib.sh | 15 +++++---- .../network/stress/ns-tools/test_net_stress.sh | 19 ++++++++++- 13 files changed, 156 insertions(+), 143 deletions(-)