diff mbox series

[net-next,2/7] net: freescale: ucc_geth: split adjust_link for phylink conversion

Message ID 20241107170255.1058124-3-maxime.chevallier@bootlin.com (mailing list archive)
State Handled Elsewhere
Headers show
Series net: freescale: ucc_geth: Phylink conversion | expand

Commit Message

Maxime Chevallier Nov. 7, 2024, 5:02 p.m. UTC
Preparing the phylink conversion, split the adjust_link callbaclk, by
clearly separating the mac configuration, link_up and link_down phases.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 drivers/net/ethernet/freescale/ucc_geth.c | 180 +++++++++++-----------
 1 file changed, 93 insertions(+), 87 deletions(-)

Comments

Andrew Lunn Nov. 7, 2024, 5:36 p.m. UTC | #1
On Thu, Nov 07, 2024 at 06:02:49PM +0100, Maxime Chevallier wrote:
> Preparing the phylink conversion, split the adjust_link callbaclk, by
> clearly separating the mac configuration, link_up and link_down phases.
> 
> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
Russell King (Oracle) Nov. 7, 2024, 5:51 p.m. UTC | #2
On Thu, Nov 07, 2024 at 06:02:49PM +0100, Maxime Chevallier wrote:
> Preparing the phylink conversion, split the adjust_link callbaclk, by
> clearly separating the mac configuration, link_up and link_down phases.

I'm not entirely sure what the point of this patch is, given that in
patch 7, all this code gets deleted, or maybe moved?

If it's moved, it may be better in patch 7 to ensure that doesn't
happen, and move it in a separate patch - right now patch 7 is horrible
to review as there's no way to see what the changes are in these
link_up()/link_down() functions.
Maxime Chevallier Nov. 7, 2024, 6:03 p.m. UTC | #3
Hello Russell,

On Thu, 7 Nov 2024 17:51:05 +0000
"Russell King (Oracle)" <linux@armlinux.org.uk> wrote:

> On Thu, Nov 07, 2024 at 06:02:49PM +0100, Maxime Chevallier wrote:
> > Preparing the phylink conversion, split the adjust_link callbaclk, by
> > clearly separating the mac configuration, link_up and link_down phases.  
> 
> I'm not entirely sure what the point of this patch is, given that in
> patch 7, all this code gets deleted, or maybe moved?
> 
> If it's moved, it may be better in patch 7 to ensure that doesn't
> happen, and move it in a separate patch - right now patch 7 is horrible
> to review as there's no way to see what the changes are in these
> link_up()/link_down() functions.

I agree that it's hard to review indeed... I followed the documented
approach of splitting-up the adjust_link callback then performing the
conversion, but it's true that it doesn't really make patch 7 more
readable.

I can try to move things around and make patch 7 a bit more
straightforward.

Thanks,

Maxime
diff mbox series

Patch

diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 80540c817c4e..6286cd185a35 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -1548,105 +1548,111 @@  static void ugeth_activate(struct ucc_geth_private *ugeth)
 	__netdev_watchdog_up(ugeth->ndev);
 }
 
-/* Called every time the controller might need to be made
- * aware of new link state.  The PHY code conveys this
- * information through variables in the ugeth structure, and this
- * function converts those variables into the appropriate
- * register values, and can bring down the device if needed.
- */
-
-static void adjust_link(struct net_device *dev)
+static void ugeth_link_up(struct ucc_geth_private *ugeth,
+			  struct phy_device *phy,
+			  phy_interface_t interface, int speed, int duplex)
 {
-	struct ucc_geth_private *ugeth = netdev_priv(dev);
-	struct ucc_geth __iomem *ug_regs;
-	struct ucc_fast __iomem *uf_regs;
-	struct phy_device *phydev = ugeth->phydev;
+	struct ucc_geth __iomem *ug_regs = ugeth->ug_regs;
+	struct ucc_fast __iomem *uf_regs = ugeth->uccf->uf_regs;
+	u32 tempval = in_be32(&ug_regs->maccfg2);
+	u32 upsmr = in_be32(&uf_regs->upsmr);
 	int new_state = 0;
 
-	ug_regs = ugeth->ug_regs;
-	uf_regs = ugeth->uccf->uf_regs;
-
-	if (phydev->link) {
-		u32 tempval = in_be32(&ug_regs->maccfg2);
-		u32 upsmr = in_be32(&uf_regs->upsmr);
-		/* Now we make sure that we can be in full duplex mode.
-		 * If not, we operate in half-duplex mode. */
-		if (phydev->duplex != ugeth->oldduplex) {
-			new_state = 1;
-			if (!(phydev->duplex))
-				tempval &= ~(MACCFG2_FDX);
-			else
-				tempval |= MACCFG2_FDX;
-			ugeth->oldduplex = phydev->duplex;
-		}
+	/* Now we make sure that we can be in full duplex mode.
+	 * If not, we operate in half-duplex mode.
+	 */
+	if (duplex != ugeth->oldduplex) {
+		new_state = 1;
+		if (duplex == DUPLEX_HALF)
+			tempval &= ~(MACCFG2_FDX);
+		else
+			tempval |= MACCFG2_FDX;
+		ugeth->oldduplex = duplex;
+	}
 
-		if (phydev->speed != ugeth->oldspeed) {
-			new_state = 1;
-			switch (phydev->speed) {
-			case SPEED_1000:
-				tempval = ((tempval &
-					    ~(MACCFG2_INTERFACE_MODE_MASK)) |
-					    MACCFG2_INTERFACE_MODE_BYTE);
-				break;
-			case SPEED_100:
-			case SPEED_10:
-				tempval = ((tempval &
-					    ~(MACCFG2_INTERFACE_MODE_MASK)) |
-					    MACCFG2_INTERFACE_MODE_NIBBLE);
-				/* if reduced mode, re-set UPSMR.R10M */
-				if ((ugeth->phy_interface == PHY_INTERFACE_MODE_RMII) ||
-				    (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII) ||
-				    (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_ID) ||
-				    (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
-				    (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
-				    (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
-					if (phydev->speed == SPEED_10)
-						upsmr |= UCC_GETH_UPSMR_R10M;
-					else
-						upsmr &= ~UCC_GETH_UPSMR_R10M;
-				}
-				break;
-			default:
-				if (netif_msg_link(ugeth))
-					pr_warn(
-						"%s: Ack!  Speed (%d) is not 10/100/1000!",
-						dev->name, phydev->speed);
-				break;
+	if (speed != ugeth->oldspeed) {
+		new_state = 1;
+		switch (speed) {
+		case SPEED_1000:
+			tempval = ((tempval &
+				    ~(MACCFG2_INTERFACE_MODE_MASK)) |
+				    MACCFG2_INTERFACE_MODE_BYTE);
+			break;
+		case SPEED_100:
+		case SPEED_10:
+			tempval = ((tempval &
+				    ~(MACCFG2_INTERFACE_MODE_MASK)) |
+				    MACCFG2_INTERFACE_MODE_NIBBLE);
+			/* if reduced mode, re-set UPSMR.R10M */
+			if (interface == PHY_INTERFACE_MODE_RMII ||
+			    phy_interface_mode_is_rgmii(interface) ||
+			    interface == PHY_INTERFACE_MODE_RTBI) {
+				if (speed == SPEED_10)
+					upsmr |= UCC_GETH_UPSMR_R10M;
+				else
+					upsmr &= ~UCC_GETH_UPSMR_R10M;
 			}
-			ugeth->oldspeed = phydev->speed;
+			break;
+		default:
+			if (netif_msg_link(ugeth))
+				pr_warn("%s:  Speed (%d) is not 10/100/1000!",
+					netdev_name(ugeth->ndev), speed);
+			break;
 		}
+		ugeth->oldspeed = speed;
+	}
 
-		if (!ugeth->oldlink) {
-			new_state = 1;
-			ugeth->oldlink = 1;
-		}
+	if (!ugeth->oldlink) {
+		new_state = 1;
+		ugeth->oldlink = 1;
+	}
 
-		if (new_state) {
-			/*
-			 * To change the MAC configuration we need to disable
-			 * the controller. To do so, we have to either grab
-			 * ugeth->lock, which is a bad idea since 'graceful
-			 * stop' commands might take quite a while, or we can
-			 * quiesce driver's activity.
-			 */
-			ugeth_quiesce(ugeth);
-			ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
+	if (new_state) {
+		/*
+		 * To change the MAC configuration we need to disable
+		 * the controller. To do so, we have to either grab
+		 * ugeth->lock, which is a bad idea since 'graceful
+		 * stop' commands might take quite a while, or we can
+		 * quiesce driver's activity.
+		 */
+		ugeth_quiesce(ugeth);
+		ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
 
-			out_be32(&ug_regs->maccfg2, tempval);
-			out_be32(&uf_regs->upsmr, upsmr);
+		out_be32(&ug_regs->maccfg2, tempval);
+		out_be32(&uf_regs->upsmr, upsmr);
 
-			ugeth_enable(ugeth, COMM_DIR_RX_AND_TX);
-			ugeth_activate(ugeth);
-		}
-	} else if (ugeth->oldlink) {
-			new_state = 1;
-			ugeth->oldlink = 0;
-			ugeth->oldspeed = 0;
-			ugeth->oldduplex = -1;
+		ugeth_enable(ugeth, COMM_DIR_RX_AND_TX);
+		ugeth_activate(ugeth);
 	}
 
-	if (new_state && netif_msg_link(ugeth))
-		phy_print_status(phydev);
+	if (netif_msg_link(ugeth))
+		phy_print_status(phy);
+}
+
+static void ugeth_link_down(struct ucc_geth_private *ugeth)
+{
+	ugeth->oldlink = 0;
+	ugeth->oldspeed = 0;
+	ugeth->oldduplex = -1;
+}
+
+/* Called every time the controller might need to be made
+ * aware of new link state.  The PHY code conveys this
+ * information through variables in the ugeth structure, and this
+ * function converts those variables into the appropriate
+ * register values, and can bring down the device if needed.
+ */
+
+static void adjust_link(struct net_device *dev)
+{
+	struct ucc_geth_private *ugeth = netdev_priv(dev);
+	struct phy_device *phydev = ugeth->phydev;
+
+	if (phydev->link)
+		ugeth_link_up(ugeth, phydev, phydev->interface,
+			      phydev->speed, phydev->duplex);
+	else
+		ugeth_link_down(ugeth);
 }
 
 /* Initialize TBI PHY interface for communicating with the