@@ -28,6 +28,13 @@
#define MICFIL_OSR_DEFAULT 16
+#define MICFIL_NUM_RATES 7
+#define MICFIL_CLK_SRC_NUM 3
+/* clock source ids */
+#define MICFIL_AUDIO_PLL1 0
+#define MICFIL_AUDIO_PLL2 1
+#define MICFIL_CLK_EXT3 2
+
enum quality {
QUALITY_HIGH,
QUALITY_MEDIUM,
@@ -45,9 +52,12 @@ struct fsl_micfil {
struct clk *mclk;
struct clk *pll8k_clk;
struct clk *pll11k_clk;
+ struct clk *clk_src[MICFIL_CLK_SRC_NUM];
struct snd_dmaengine_dai_dma_data dma_params_rx;
struct sdma_peripheral_config sdmacfg;
struct snd_soc_card *card;
+ struct snd_pcm_hw_constraint_list constraint_rates;
+ unsigned int constraint_rates_list[MICFIL_NUM_RATES];
unsigned int dataline;
char name[32];
int irq[MICFIL_IRQ_LINES];
@@ -450,12 +460,34 @@ static int fsl_micfil_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct fsl_micfil *micfil = snd_soc_dai_get_drvdata(dai);
+ unsigned int rates[MICFIL_NUM_RATES] = {8000, 11025, 16000, 22050, 32000, 44100, 48000};
+ int i, j, k = 0;
+ u64 clk_rate;
if (!micfil) {
dev_err(dai->dev, "micfil dai priv_data not set\n");
return -EINVAL;
}
+ micfil->constraint_rates.list = micfil->constraint_rates_list;
+ micfil->constraint_rates.count = 0;
+
+ for (j = 0; j < MICFIL_NUM_RATES; j++) {
+ for (i = 0; i < MICFIL_CLK_SRC_NUM; i++) {
+ clk_rate = clk_get_rate(micfil->clk_src[i]);
+ if (clk_rate != 0 && do_div(clk_rate, rates[j]) == 0) {
+ micfil->constraint_rates_list[k++] = rates[j];
+ micfil->constraint_rates.count++;
+ break;
+ }
+ }
+ }
+
+ if (micfil->constraint_rates.count > 0)
+ snd_pcm_hw_constraint_list(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE,
+ &micfil->constraint_rates);
+
return 0;
}
@@ -1160,6 +1192,12 @@ static int fsl_micfil_probe(struct platform_device *pdev)
fsl_asoc_get_pll_clocks(&pdev->dev, &micfil->pll8k_clk,
&micfil->pll11k_clk);
+ micfil->clk_src[MICFIL_AUDIO_PLL1] = micfil->pll8k_clk;
+ micfil->clk_src[MICFIL_AUDIO_PLL2] = micfil->pll11k_clk;
+ micfil->clk_src[MICFIL_CLK_EXT3] = devm_clk_get(&pdev->dev, "clkext3");
+ if (IS_ERR(micfil->clk_src[MICFIL_CLK_EXT3]))
+ micfil->clk_src[MICFIL_CLK_EXT3] = NULL;
+
/* init regmap */
regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(regs))
On some platforms, for example i.MX93, there is only one audio PLL source, so some sample rate can't be supported. If the PLL source is used for 8kHz series rates, then 11kHz series rates can't be supported. So add constraints according to the frequency of available clock sources, then alsa-lib will help to convert the unsupported rate for the driver. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> --- sound/soc/fsl/fsl_micfil.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)