diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 46b826fcb5ad..7ccd158b3894 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2545,7 +2545,7 @@
 			mem_encrypt=on:		Activate SME
 			mem_encrypt=off:	Do not activate SME
 
-			Refer to Documentation/virtual/kvm/amd-memory-encryption.rst
+			Refer to Documentation/virt/kvm/amd-memory-encryption.rst
 			for details on when memory encryption can be activated.
 
 	mem_sleep_default=	[SUSPEND] Default system suspend mode:
diff --git a/Documentation/virtual/index.rst b/Documentation/virt/index.rst
similarity index 100%
rename from Documentation/virtual/index.rst
rename to Documentation/virt/index.rst
diff --git a/Documentation/virtual/kvm/amd-memory-encryption.rst b/Documentation/virt/kvm/amd-memory-encryption.rst
similarity index 100%
rename from Documentation/virtual/kvm/amd-memory-encryption.rst
rename to Documentation/virt/kvm/amd-memory-encryption.rst
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virt/kvm/api.txt
similarity index 99%
rename from Documentation/virtual/kvm/api.txt
rename to Documentation/virt/kvm/api.txt
index e54a3f51ddc5..2d067767b617 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virt/kvm/api.txt
@@ -3781,7 +3781,7 @@ encrypted VMs.
 
 Currently, this ioctl is used for issuing Secure Encrypted Virtualization
 (SEV) commands on AMD Processors. The SEV commands are defined in
-Documentation/virtual/kvm/amd-memory-encryption.rst.
+Documentation/virt/kvm/amd-memory-encryption.rst.
 
 4.111 KVM_MEMORY_ENCRYPT_REG_REGION
 
diff --git a/Documentation/virtual/kvm/arm/hyp-abi.txt b/Documentation/virt/kvm/arm/hyp-abi.txt
similarity index 100%
rename from Documentation/virtual/kvm/arm/hyp-abi.txt
rename to Documentation/virt/kvm/arm/hyp-abi.txt
diff --git a/Documentation/virtual/kvm/arm/psci.txt b/Documentation/virt/kvm/arm/psci.txt
similarity index 100%
rename from Documentation/virtual/kvm/arm/psci.txt
rename to Documentation/virt/kvm/arm/psci.txt
diff --git a/Documentation/virtual/kvm/cpuid.rst b/Documentation/virt/kvm/cpuid.rst
similarity index 100%
rename from Documentation/virtual/kvm/cpuid.rst
rename to Documentation/virt/kvm/cpuid.rst
diff --git a/Documentation/virtual/kvm/devices/README b/Documentation/virt/kvm/devices/README
similarity index 100%
rename from Documentation/virtual/kvm/devices/README
rename to Documentation/virt/kvm/devices/README
diff --git a/Documentation/virtual/kvm/devices/arm-vgic-its.txt b/Documentation/virt/kvm/devices/arm-vgic-its.txt
similarity index 100%
rename from Documentation/virtual/kvm/devices/arm-vgic-its.txt
rename to Documentation/virt/kvm/devices/arm-vgic-its.txt
diff --git a/Documentation/virtual/kvm/devices/arm-vgic-v3.txt b/Documentation/virt/kvm/devices/arm-vgic-v3.txt
similarity index 100%
rename from Documentation/virtual/kvm/devices/arm-vgic-v3.txt
rename to Documentation/virt/kvm/devices/arm-vgic-v3.txt
diff --git a/Documentation/virtual/kvm/devices/arm-vgic.txt b/Documentation/virt/kvm/devices/arm-vgic.txt
similarity index 100%
rename from Documentation/virtual/kvm/devices/arm-vgic.txt
rename to Documentation/virt/kvm/devices/arm-vgic.txt
diff --git a/Documentation/virtual/kvm/devices/mpic.txt b/Documentation/virt/kvm/devices/mpic.txt
similarity index 100%
rename from Documentation/virtual/kvm/devices/mpic.txt
rename to Documentation/virt/kvm/devices/mpic.txt
diff --git a/Documentation/virtual/kvm/devices/s390_flic.txt b/Documentation/virt/kvm/devices/s390_flic.txt
similarity index 100%
rename from Documentation/virtual/kvm/devices/s390_flic.txt
rename to Documentation/virt/kvm/devices/s390_flic.txt
diff --git a/Documentation/virtual/kvm/devices/vcpu.txt b/Documentation/virt/kvm/devices/vcpu.txt
similarity index 100%
rename from Documentation/virtual/kvm/devices/vcpu.txt
rename to Documentation/virt/kvm/devices/vcpu.txt
diff --git a/Documentation/virtual/kvm/devices/vfio.txt b/Documentation/virt/kvm/devices/vfio.txt
similarity index 100%
rename from Documentation/virtual/kvm/devices/vfio.txt
rename to Documentation/virt/kvm/devices/vfio.txt
diff --git a/Documentation/virtual/kvm/devices/vm.txt b/Documentation/virt/kvm/devices/vm.txt
similarity index 100%
rename from Documentation/virtual/kvm/devices/vm.txt
rename to Documentation/virt/kvm/devices/vm.txt
diff --git a/Documentation/virtual/kvm/devices/xics.txt b/Documentation/virt/kvm/devices/xics.txt
similarity index 100%
rename from Documentation/virtual/kvm/devices/xics.txt
rename to Documentation/virt/kvm/devices/xics.txt
diff --git a/Documentation/virtual/kvm/devices/xive.txt b/Documentation/virt/kvm/devices/xive.txt
similarity index 100%
rename from Documentation/virtual/kvm/devices/xive.txt
rename to Documentation/virt/kvm/devices/xive.txt
diff --git a/Documentation/virtual/kvm/halt-polling.txt b/Documentation/virt/kvm/halt-polling.txt
similarity index 100%
rename from Documentation/virtual/kvm/halt-polling.txt
rename to Documentation/virt/kvm/halt-polling.txt
diff --git a/Documentation/virtual/kvm/hypercalls.txt b/Documentation/virt/kvm/hypercalls.txt
similarity index 97%
rename from Documentation/virtual/kvm/hypercalls.txt
rename to Documentation/virt/kvm/hypercalls.txt
index da210651f714..5f6d291bd004 100644
--- a/Documentation/virtual/kvm/hypercalls.txt
+++ b/Documentation/virt/kvm/hypercalls.txt
@@ -18,7 +18,7 @@ S390:
   number in R1.
 
   For further information on the S390 diagnose call as supported by KVM,
-  refer to Documentation/virtual/kvm/s390-diag.txt.
+  refer to Documentation/virt/kvm/s390-diag.txt.
 
  PowerPC:
   It uses R3-R10 and hypercall number in R11. R4-R11 are used as output registers.
@@ -26,7 +26,7 @@ S390:
 
   KVM hypercalls uses 4 byte opcode, that are patched with 'hypercall-instructions'
   property inside the device tree's /hypervisor node.
-  For more information refer to Documentation/virtual/kvm/ppc-pv.txt
+  For more information refer to Documentation/virt/kvm/ppc-pv.txt
 
 MIPS:
   KVM hypercalls use the HYPCALL instruction with code 0 and the hypercall
diff --git a/Documentation/virtual/kvm/index.rst b/Documentation/virt/kvm/index.rst
similarity index 100%
rename from Documentation/virtual/kvm/index.rst
rename to Documentation/virt/kvm/index.rst
diff --git a/Documentation/virtual/kvm/locking.txt b/Documentation/virt/kvm/locking.txt
similarity index 100%
rename from Documentation/virtual/kvm/locking.txt
rename to Documentation/virt/kvm/locking.txt
diff --git a/Documentation/virtual/kvm/mmu.txt b/Documentation/virt/kvm/mmu.txt
similarity index 99%
rename from Documentation/virtual/kvm/mmu.txt
rename to Documentation/virt/kvm/mmu.txt
index 2efe0efc516e..1b9880dfba0a 100644
--- a/Documentation/virtual/kvm/mmu.txt
+++ b/Documentation/virt/kvm/mmu.txt
@@ -298,7 +298,7 @@ Handling a page fault is performed as follows:
      vcpu->arch.mmio_gfn, and call the emulator
  - If both P bit and R/W bit of error code are set, this could possibly
    be handled as a "fast page fault" (fixed without taking the MMU lock).  See
-   the description in Documentation/virtual/kvm/locking.txt.
+   the description in Documentation/virt/kvm/locking.txt.
  - if needed, walk the guest page tables to determine the guest translation
    (gva->gpa or ngpa->gpa)
    - if permissions are insufficient, reflect the fault back to the guest
diff --git a/Documentation/virtual/kvm/msr.txt b/Documentation/virt/kvm/msr.txt
similarity index 100%
rename from Documentation/virtual/kvm/msr.txt
rename to Documentation/virt/kvm/msr.txt
diff --git a/Documentation/virtual/kvm/nested-vmx.txt b/Documentation/virt/kvm/nested-vmx.txt
similarity index 100%
rename from Documentation/virtual/kvm/nested-vmx.txt
rename to Documentation/virt/kvm/nested-vmx.txt
diff --git a/Documentation/virtual/kvm/ppc-pv.txt b/Documentation/virt/kvm/ppc-pv.txt
similarity index 100%
rename from Documentation/virtual/kvm/ppc-pv.txt
rename to Documentation/virt/kvm/ppc-pv.txt
diff --git a/Documentation/virtual/kvm/review-checklist.txt b/Documentation/virt/kvm/review-checklist.txt
similarity index 95%
rename from Documentation/virtual/kvm/review-checklist.txt
rename to Documentation/virt/kvm/review-checklist.txt
index a83b27635fdd..499af499e296 100644
--- a/Documentation/virtual/kvm/review-checklist.txt
+++ b/Documentation/virt/kvm/review-checklist.txt
@@ -7,7 +7,7 @@ Review checklist for kvm patches
 2.  Patches should be against kvm.git master branch.
 
 3.  If the patch introduces or modifies a new userspace API:
-    - the API must be documented in Documentation/virtual/kvm/api.txt
+    - the API must be documented in Documentation/virt/kvm/api.txt
     - the API must be discoverable using KVM_CHECK_EXTENSION
 
 4.  New state must include support for save/restore.
diff --git a/Documentation/virtual/kvm/s390-diag.txt b/Documentation/virt/kvm/s390-diag.txt
similarity index 100%
rename from Documentation/virtual/kvm/s390-diag.txt
rename to Documentation/virt/kvm/s390-diag.txt
diff --git a/Documentation/virtual/kvm/timekeeping.txt b/Documentation/virt/kvm/timekeeping.txt
similarity index 100%
rename from Documentation/virtual/kvm/timekeeping.txt
rename to Documentation/virt/kvm/timekeeping.txt
diff --git a/Documentation/virtual/kvm/vcpu-requests.rst b/Documentation/virt/kvm/vcpu-requests.rst
similarity index 100%
rename from Documentation/virtual/kvm/vcpu-requests.rst
rename to Documentation/virt/kvm/vcpu-requests.rst
diff --git a/Documentation/virtual/paravirt_ops.rst b/Documentation/virt/paravirt_ops.rst
similarity index 100%
rename from Documentation/virtual/paravirt_ops.rst
rename to Documentation/virt/paravirt_ops.rst
diff --git a/Documentation/virtual/uml/UserModeLinux-HOWTO.txt b/Documentation/virt/uml/UserModeLinux-HOWTO.txt
similarity index 100%
rename from Documentation/virtual/uml/UserModeLinux-HOWTO.txt
rename to Documentation/virt/uml/UserModeLinux-HOWTO.txt
diff --git a/MAINTAINERS b/MAINTAINERS
index 783569e3c4b4..5e1f9ee8f86f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8808,7 +8808,7 @@ L:	kvm@vger.kernel.org
 W:	http://www.linux-kvm.org
 T:	git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
 S:	Supported
-F:	Documentation/virtual/kvm/
+F:	Documentation/virt/kvm/
 F:	include/trace/events/kvm.h
 F:	include/uapi/asm-generic/kvm*
 F:	include/uapi/linux/kvm*
@@ -12137,7 +12137,7 @@ M:	Thomas Hellstrom <thellstrom@vmware.com>
 M:	"VMware, Inc." <pv-drivers@vmware.com>
 L:	virtualization@lists.linux-foundation.org
 S:	Supported
-F:	Documentation/virtual/paravirt_ops.txt
+F:	Documentation/virt/paravirt_ops.txt
 F:	arch/*/kernel/paravirt*
 F:	arch/*/include/asm/paravirt*.h
 F:	include/linux/hypervisor.h
@@ -16854,7 +16854,7 @@ W:	http://user-mode-linux.sourceforge.net
 Q:	https://patchwork.ozlabs.org/project/linux-um/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml.git
 S:	Maintained
-F:	Documentation/virtual/uml/
+F:	Documentation/virt/uml/
 F:	arch/um/
 F:	arch/x86/um/
 F:	fs/hostfs/
diff --git a/arch/powerpc/include/uapi/asm/kvm_para.h b/arch/powerpc/include/uapi/asm/kvm_para.h
index 01555c6ae0f5..be48c2215fa2 100644
--- a/arch/powerpc/include/uapi/asm/kvm_para.h
+++ b/arch/powerpc/include/uapi/asm/kvm_para.h
@@ -31,7 +31,7 @@
  * Struct fields are always 32 or 64 bit aligned, depending on them being 32
  * or 64 bit wide respectively.
  *
- * See Documentation/virtual/kvm/ppc-pv.txt
+ * See Documentation/virt/kvm/ppc-pv.txt
  */
 struct kvm_vcpu_arch_shared {
 	__u64 scratch1;
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 8f72526e2f68..24843cf49579 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3466,7 +3466,7 @@ static bool fast_page_fault(struct kvm_vcpu *vcpu, gva_t gva, int level,
 		/*
 		 * Currently, fast page fault only works for direct mapping
 		 * since the gfn is not stable for indirect shadow page. See
-		 * Documentation/virtual/kvm/locking.txt to get more detail.
+		 * Documentation/virt/kvm/locking.txt to get more detail.
 		 */
 		fault_handled = fast_pf_fix_direct_spte(vcpu, sp,
 							iterator.sptep, spte,
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index a7c19540ce21..5e3f12d5359e 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -116,7 +116,7 @@ struct kvm_irq_level {
 	 * ACPI gsi notion of irq.
 	 * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
 	 * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
-	 * For ARM: See Documentation/virtual/kvm/api.txt
+	 * For ARM: See Documentation/virt/kvm/api.txt
 	 */
 	union {
 		__u32 irq;
@@ -1086,7 +1086,7 @@ struct kvm_xen_hvm_config {
  *
  * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
  * the irqfd to operate in resampling mode for level triggered interrupt
- * emulation.  See Documentation/virtual/kvm/api.txt.
+ * emulation.  See Documentation/virt/kvm/api.txt.
  */
 #define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
 
diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h
index c2152f3dd02d..e7c67be7c15f 100644
--- a/tools/include/uapi/linux/kvm.h
+++ b/tools/include/uapi/linux/kvm.h
@@ -116,7 +116,7 @@ struct kvm_irq_level {
 	 * ACPI gsi notion of irq.
 	 * For IA-64 (APIC model) IOAPIC0: irq 0-23; IOAPIC1: irq 24-47..
 	 * For X86 (standard AT mode) PIC0/1: irq 0-15. IOAPIC0: 0-23..
-	 * For ARM: See Documentation/virtual/kvm/api.txt
+	 * For ARM: See Documentation/virt/kvm/api.txt
 	 */
 	union {
 		__u32 irq;
@@ -1085,7 +1085,7 @@ struct kvm_xen_hvm_config {
  *
  * KVM_IRQFD_FLAG_RESAMPLE indicates resamplefd is valid and specifies
  * the irqfd to operate in resampling mode for level triggered interrupt
- * emulation.  See Documentation/virtual/kvm/api.txt.
+ * emulation.  See Documentation/virt/kvm/api.txt.
  */
 #define KVM_IRQFD_FLAG_RESAMPLE (1 << 1)
 
diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
index f645c0fbf7ec..acc43242a310 100644
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -727,7 +727,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		 * Ensure we set mode to IN_GUEST_MODE after we disable
 		 * interrupts and before the final VCPU requests check.
 		 * See the comment in kvm_vcpu_exiting_guest_mode() and
-		 * Documentation/virtual/kvm/vcpu-requests.rst
+		 * Documentation/virt/kvm/vcpu-requests.rst
 		 */
 		smp_store_mb(vcpu->mode, IN_GUEST_MODE);
 
diff --git a/virt/kvm/arm/vgic/vgic-mmio-v3.c b/virt/kvm/arm/vgic/vgic-mmio-v3.c
index 936962abc38d..c45e2d7e942f 100644
--- a/virt/kvm/arm/vgic/vgic-mmio-v3.c
+++ b/virt/kvm/arm/vgic/vgic-mmio-v3.c
@@ -250,7 +250,7 @@ static unsigned long vgic_v3_uaccess_read_pending(struct kvm_vcpu *vcpu,
 	 * pending state of interrupt is latched in pending_latch variable.
 	 * Userspace will save and restore pending state and line_level
 	 * separately.
-	 * Refer to Documentation/virtual/kvm/devices/arm-vgic-v3.txt
+	 * Refer to Documentation/virt/kvm/devices/arm-vgic-v3.txt
 	 * for handling of ISPENDR and ICPENDR.
 	 */
 	for (i = 0; i < len * 8; i++) {
diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
index 57205beaa981..3b7525deec80 100644
--- a/virt/kvm/arm/vgic/vgic.h
+++ b/virt/kvm/arm/vgic/vgic.h
@@ -42,7 +42,7 @@
 			    VGIC_AFFINITY_LEVEL(val, 3))
 
 /*
- * As per Documentation/virtual/kvm/devices/arm-vgic-v3.txt,
+ * As per Documentation/virt/kvm/devices/arm-vgic-v3.txt,
  * below macros are defined for CPUREG encoding.
  */
 #define KVM_REG_ARM_VGIC_SYSREG_OP0_MASK   0x000000000000c000
@@ -63,7 +63,7 @@
 				      KVM_REG_ARM_VGIC_SYSREG_OP2_MASK)
 
 /*
- * As per Documentation/virtual/kvm/devices/arm-vgic-its.txt,
+ * As per Documentation/virt/kvm/devices/arm-vgic-its.txt,
  * below macros are defined for ITS table entry encoding.
  */
 #define KVM_ITS_CTE_VALID_SHIFT		63
