@@ -194,14 +194,12 @@ source "init/Kconfig"
source "kernel/Kconfig.freezer"
-source "arch/um/Kconfig.char"
+source "arch/um/drivers/Kconfig"
source "drivers/Kconfig"
source "net/Kconfig"
-source "arch/um/Kconfig.net"
-
source "fs/Kconfig"
source "security/Kconfig"
deleted file mode 100644
@@ -1,124 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menu "UML Character Devices"
-
-config STDERR_CONSOLE
- bool "stderr console"
- default y
- help
- console driver which dumps all printk messages to stderr.
-
-config SSL
- bool "Virtual serial line"
- help
- The User-Mode Linux environment allows you to create virtual serial
- lines on the UML that are usually made to show up on the host as
- ttys or ptys.
-
- See <http://user-mode-linux.sourceforge.net/old/input.html> for more
- information and command line examples of how to use this facility.
-
- Unless you have a specific reason for disabling this, say Y.
-
-config NULL_CHAN
- bool "null channel support"
- help
- This option enables support for attaching UML consoles and serial
- lines to a device similar to /dev/null. Data written to it disappears
- and there is never any data to be read.
-
-config PORT_CHAN
- bool "port channel support"
- help
- This option enables support for attaching UML consoles and serial
- lines to host portals. They may be accessed with 'telnet <host>
- <port number>'. Any number of consoles and serial lines may be
- attached to a single portal, although what UML device you get when
- you telnet to that portal will be unpredictable.
- It is safe to say 'Y' here.
-
-config PTY_CHAN
- bool "pty channel support"
- help
- This option enables support for attaching UML consoles and serial
- lines to host pseudo-terminals. Access to both traditional
- pseudo-terminals (/dev/pty*) and pts pseudo-terminals are controlled
- with this option. The assignment of UML devices to host devices
- will be announced in the kernel message log.
- It is safe to say 'Y' here.
-
-config TTY_CHAN
- bool "tty channel support"
- help
- This option enables support for attaching UML consoles and serial
- lines to host terminals. Access to both virtual consoles
- (/dev/tty*) and the slave side of pseudo-terminals (/dev/ttyp* and
- /dev/pts/*) are controlled by this option.
- It is safe to say 'Y' here.
-
-config XTERM_CHAN
- bool "xterm channel support"
- help
- This option enables support for attaching UML consoles and serial
- lines to xterms. Each UML device so assigned will be brought up in
- its own xterm.
- It is safe to say 'Y' here.
-
-config NOCONFIG_CHAN
- bool
- default !(XTERM_CHAN && TTY_CHAN && PTY_CHAN && PORT_CHAN && NULL_CHAN)
-
-config CON_ZERO_CHAN
- string "Default main console channel initialization"
- default "fd:0,fd:1"
- help
- This is the string describing the channel to which the main console
- will be attached by default. This value can be overridden from the
- command line. The default value is "fd:0,fd:1", which attaches the
- main console to stdin and stdout.
- It is safe to leave this unchanged.
-
-config CON_CHAN
- string "Default console channel initialization"
- default "xterm"
- help
- This is the string describing the channel to which all consoles
- except the main console will be attached by default. This value can
- be overridden from the command line. The default value is "xterm",
- which brings them up in xterms.
- It is safe to leave this unchanged, although you may wish to change
- this if you expect the UML that you build to be run in environments
- which don't have X or xterm available.
-
-config SSL_CHAN
- string "Default serial line channel initialization"
- default "pty"
- help
- This is the string describing the channel to which the serial lines
- will be attached by default. This value can be overridden from the
- command line. The default value is "pty", which attaches them to
- traditional pseudo-terminals.
- It is safe to leave this unchanged, although you may wish to change
- this if you expect the UML that you build to be run in environments
- which don't have a set of /dev/pty* devices.
-
-config UML_SOUND
- tristate "Sound support"
- help
- This option enables UML sound support. If enabled, it will pull in
- soundcore and the UML hostaudio relay, which acts as a intermediary
- between the host's dsp and mixer devices and the UML sound system.
- It is safe to say 'Y' here.
-
-config SOUND
- tristate
- default UML_SOUND
-
-config SOUND_OSS_CORE
- bool
- default UML_SOUND
-
-config HOSTAUDIO
- tristate
- default UML_SOUND
-
-endmenu
similarity index 66%
rename from arch/um/Kconfig.net
rename to arch/um/drivers/Kconfig
@@ -1,5 +1,129 @@
# SPDX-License-Identifier: GPL-2.0
+menu "UML Character Devices"
+
+config STDERR_CONSOLE
+ bool "stderr console"
+ default y
+ help
+ console driver which dumps all printk messages to stderr.
+
+config SSL
+ bool "Virtual serial line"
+ help
+ The User-Mode Linux environment allows you to create virtual serial
+ lines on the UML that are usually made to show up on the host as
+ ttys or ptys.
+
+ See <http://user-mode-linux.sourceforge.net/old/input.html> for more
+ information and command line examples of how to use this facility.
+
+ Unless you have a specific reason for disabling this, say Y.
+
+config NULL_CHAN
+ bool "null channel support"
+ help
+ This option enables support for attaching UML consoles and serial
+ lines to a device similar to /dev/null. Data written to it disappears
+ and there is never any data to be read.
+
+config PORT_CHAN
+ bool "port channel support"
+ help
+ This option enables support for attaching UML consoles and serial
+ lines to host portals. They may be accessed with 'telnet <host>
+ <port number>'. Any number of consoles and serial lines may be
+ attached to a single portal, although what UML device you get when
+ you telnet to that portal will be unpredictable.
+ It is safe to say 'Y' here.
+
+config PTY_CHAN
+ bool "pty channel support"
+ help
+ This option enables support for attaching UML consoles and serial
+ lines to host pseudo-terminals. Access to both traditional
+ pseudo-terminals (/dev/pty*) and pts pseudo-terminals are controlled
+ with this option. The assignment of UML devices to host devices
+ will be announced in the kernel message log.
+ It is safe to say 'Y' here.
+
+config TTY_CHAN
+ bool "tty channel support"
+ help
+ This option enables support for attaching UML consoles and serial
+ lines to host terminals. Access to both virtual consoles
+ (/dev/tty*) and the slave side of pseudo-terminals (/dev/ttyp* and
+ /dev/pts/*) are controlled by this option.
+ It is safe to say 'Y' here.
+
+config XTERM_CHAN
+ bool "xterm channel support"
+ help
+ This option enables support for attaching UML consoles and serial
+ lines to xterms. Each UML device so assigned will be brought up in
+ its own xterm.
+ It is safe to say 'Y' here.
+
+config NOCONFIG_CHAN
+ bool
+ default !(XTERM_CHAN && TTY_CHAN && PTY_CHAN && PORT_CHAN && NULL_CHAN)
+
+config CON_ZERO_CHAN
+ string "Default main console channel initialization"
+ default "fd:0,fd:1"
+ help
+ This is the string describing the channel to which the main console
+ will be attached by default. This value can be overridden from the
+ command line. The default value is "fd:0,fd:1", which attaches the
+ main console to stdin and stdout.
+ It is safe to leave this unchanged.
+
+config CON_CHAN
+ string "Default console channel initialization"
+ default "xterm"
+ help
+ This is the string describing the channel to which all consoles
+ except the main console will be attached by default. This value can
+ be overridden from the command line. The default value is "xterm",
+ which brings them up in xterms.
+ It is safe to leave this unchanged, although you may wish to change
+ this if you expect the UML that you build to be run in environments
+ which don't have X or xterm available.
+
+config SSL_CHAN
+ string "Default serial line channel initialization"
+ default "pty"
+ help
+ This is the string describing the channel to which the serial lines
+ will be attached by default. This value can be overridden from the
+ command line. The default value is "pty", which attaches them to
+ traditional pseudo-terminals.
+ It is safe to leave this unchanged, although you may wish to change
+ this if you expect the UML that you build to be run in environments
+ which don't have a set of /dev/pty* devices.
+
+config UML_SOUND
+ tristate "Sound support"
+ help
+ This option enables UML sound support. If enabled, it will pull in
+ soundcore and the UML hostaudio relay, which acts as a intermediary
+ between the host's dsp and mixer devices and the UML sound system.
+ It is safe to say 'Y' here.
+
+config SOUND
+ tristate
+ default UML_SOUND
+
+config SOUND_OSS_CORE
+ bool
+ default UML_SOUND
+
+config HOSTAUDIO
+ tristate
+ default UML_SOUND
+
+endmenu
+
menu "UML Network Devices"
depends on NET
@@ -211,4 +335,3 @@ config UML_NET_SLIRP
Startup example: "eth0=slirp,FE:FD:01:02:03:04,/usr/local/bin/slirp"
endmenu
-