@@ -6,33 +6,6 @@
model = "NVIDIA Jetson AGX Orin";
compatible = "nvidia,p3701-0000", "nvidia,tegra234";
- bus@0 {
-
- padctl@3520000 {
- vclamp-usb-supply = <&vdd_1v8_ao>;
- avdd-usb-supply = <&vdd_3v3_ao>;
-
- ports {
- usb2-0 {
- vbus-supply = <&vdd_5v0_sys>;
- };
-
- usb2-1 {
- vbus-supply = <&vdd_5v0_sys>;
- };
-
- usb2-2 {
- vbus-supply = <&vdd_5v0_sys>;
- };
-
- usb2-3 {
- vbus-supply = <&vdd_5v0_sys>;
- };
- };
- };
-
- };
-
thermal-zones {
tj-thermal {
polling-delay = <1000>;
@@ -81,6 +81,29 @@
non-removable;
};
+ padctl@3520000 {
+ vclamp-usb-supply = <&vdd_1v8_ao>;
+ avdd-usb-supply = <&vdd_3v3_ao>;
+
+ ports {
+ usb2-0 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-1 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-2 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-3 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+ };
+ };
+
i2c@c240000 {
status = "okay";
@@ -121,8 +121,6 @@
};
padctl@3520000 {
- vclamp-usb-supply = <&vdd_1v8_ao>;
- avdd-usb-supply = <&vdd_3v3_ao>;
status = "okay";
pads {
@@ -175,25 +173,21 @@
mode = "otg";
usb-role-switch;
status = "okay";
- vbus-supply = <&vdd_5v0_sys>;
};
usb2-1 {
mode = "host";
status = "okay";
- vbus-supply = <&vdd_5v0_sys>;
};
usb2-2 {
mode = "host";
status = "okay";
- vbus-supply = <&vdd_5v0_sys>;
};
usb2-3 {
mode = "host";
status = "okay";
- vbus-supply = <&vdd_5v0_sys>;
};
usb3-0 {
Some padctl supply nodes currently reside in board file, when they should reside on module level. The nodes are part of module, not board. Move these nodes to the correct AGX Orin module file. Signed-off-by: Dara Stotland <dstotland@nvidia.com> --- .../boot/dts/nvidia/tegra234-p3701-0000.dtsi | 27 ------------------- .../arm64/boot/dts/nvidia/tegra234-p3701.dtsi | 23 ++++++++++++++++ .../nvidia/tegra234-p3740-0002+p3701-0008.dts | 6 ----- 3 files changed, 23 insertions(+), 33 deletions(-)