diff mbox series

[V3,09/21] PCI: tegra194: Calibrate P2U for endpoint mode

Message ID 20221013183854.21087-10-vidyas@nvidia.com
State Not Applicable
Headers show
Series Enhancements to pcie-tegra194 driver | expand

Commit Message

Vidya Sagar Oct. 13, 2022, 6:38 p.m. UTC 
Calibrate P2U for endpoint controller to request UPHY PLL rate change to
Gen1 during initialization. This helps to reset stale PLL state from the
previous bad link state.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
---
V3:
* Reworded the commit message

V2:
* None

 drivers/pci/controller/dwc/pcie-tegra194.c | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index dff38f73d9a7..910dc6c2154e 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1130,6 +1130,9 @@  static int tegra_pcie_enable_phy(struct tegra_pcie_dw *pcie)
 		ret = phy_power_on(pcie->phys[i]);
 		if (ret < 0)
 			goto phy_exit;
+
+		if (pcie->of_data->mode == DW_PCIE_EP_TYPE)
+			phy_calibrate(pcie->phys[i]);
 	}
 
 	return 0;