From patchwork Thu Dec 9 16:53:36 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Thierry Reding X-Patchwork-Id: 1565841 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20210112 header.b=WbEk7fg8; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-tegra-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4J90VP6Vqbz9s3q for ; Fri, 10 Dec 2021 03:53:49 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S241381AbhLIQ5V (ORCPT ); Thu, 9 Dec 2021 11:57:21 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40586 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238120AbhLIQ5V (ORCPT ); Thu, 9 Dec 2021 11:57:21 -0500 Received: from mail-wr1-x42a.google.com (mail-wr1-x42a.google.com [IPv6:2a00:1450:4864:20::42a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3F5B6C061746; Thu, 9 Dec 2021 08:53:47 -0800 (PST) Received: by mail-wr1-x42a.google.com with SMTP id i5so10810619wrb.2; Thu, 09 Dec 2021 08:53:47 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=3HIM41WLGN21TIrY4S+aqs2mu9+dq63GuvS9U31Vx2E=; b=WbEk7fg8n2zkKv2e6uF4YZoxj4/u7KvZKnPkPUQLP5ZkhzM/V6JyOBSgG9PfKX09pa bvGWhuzlH1U/xuP0sszphJV0Mg7QXMCFB47DDH6FqZNre1RX8y5gSqaMjAnK7nG7aeSP sQwMHhiC4YFXR209sZ632zZA9o103w24Ngp3ro6jA4+rswxMyQxfs1lJKF5Qcyk45PYA RxegYMNDXmyX+GaEzftEi+tiuJ8ungTaKFGej4LHob/8amIYPcbld/IHbaRyF0SWOhfV 6DUHgzUh2Kvw+ssbqBz6uvLeOBHBClIIwRObMUK+CRua8GQSrib8YP2OHJqc0YztzTki yjig== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=3HIM41WLGN21TIrY4S+aqs2mu9+dq63GuvS9U31Vx2E=; b=lfJXzHfMzdVutJdDYLJLhVQKkBLo0fFwHgYfkcr4UzId4FdaNV9mOGjciMf09S7/uK XTdX+UgEiIDCAh+T14apacGwGPMG4s03PId2W3vdtVroUNZTa+93OUPw5xR+ba8vciZp UQ2PEuoOKcbmcm3eTvANpq7pm4iSkCTAXMJ7sh60CxsZOOf91o7ImP/UNt6Xo5fq/tiB b/ezWiFnQ3Pe2UiqHWQWx/HAtSVyJ7fPOC7n7ARnDmLFlqHnb2S9Hyw1Dw/+7vV4sW2V OURYpEzsNwcM9R2WFX/H2DXq7DJ4wKTREJt6xDwkqtSdS4jKPZHBoe9lLOyV6U28ghM+ xK1w== X-Gm-Message-State: AOAM532l6cIO66KLiVCrSphudl+p23jbEyQynFkt8NZCU2RrhjwiC1ZC /UgltTvCnAHIUXxVZmWR3MS7krfMkwGEQA== X-Google-Smtp-Source: ABdhPJxI/r8JhEZcU8VnmcD79u7FIwEYFLDcyV/EHotjIiGsVaft7w/Att+WdBhLLgFE91cnsxt+Ew== X-Received: by 2002:a05:6000:1885:: with SMTP id a5mr7950074wri.258.1639068825510; Thu, 09 Dec 2021 08:53:45 -0800 (PST) Received: from localhost ([193.209.96.43]) by smtp.gmail.com with ESMTPSA id l15sm306943wme.47.2021.12.09.08.53.44 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 09 Dec 2021 08:53:44 -0800 (PST) From: Thierry Reding To: Rob Herring Cc: Greg Kroah-Hartman , Peter Chen , Nagarjuna Kristam , JC Kuo , devicetree@vger.kernel.org, linux-tegra@vger.kernel.org, linux-usb@vger.kernel.org Subject: [PATCH 1/4] dt-bindings: usb: chipidea: Convert to json-schema Date: Thu, 9 Dec 2021 17:53:36 +0100 Message-Id: <20211209165339.614498-1-thierry.reding@gmail.com> X-Mailer: git-send-email 2.34.1 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-tegra@vger.kernel.org From: Thierry Reding Convert the ChipIdea USB2 bindings from the free-form text format to json-schema. Signed-off-by: Thierry Reding --- .../bindings/usb/chipidea,usb2.yaml | 310 ++++++++++++++++++ .../devicetree/bindings/usb/ci-hdrc-usb2.txt | 158 --------- 2 files changed, 310 insertions(+), 158 deletions(-) create mode 100644 Documentation/devicetree/bindings/usb/chipidea,usb2.yaml delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt diff --git a/Documentation/devicetree/bindings/usb/chipidea,usb2.yaml b/Documentation/devicetree/bindings/usb/chipidea,usb2.yaml new file mode 100644 index 000000000000..0e36259f23ba --- /dev/null +++ b/Documentation/devicetree/bindings/usb/chipidea,usb2.yaml @@ -0,0 +1,310 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/chipidea,usb2.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: USB2 ChipIdea USB controller for ci13xxx + +maintainers: + - Peter Chen + +properties: + compatible: + oneOf: + - enum: + - fsl,imx23-usb + - fsl,imx27-usb + - fsl,imx28-usb + - fsl,imx6q-usb + - fsl,imx6sl-usb + - fsl,imx6sx-usb + - fsl,imx6ul-usb + - fsl,imx7d-usb + - fsl,imx7ulp-usb + - lsi,zevio-usb + - qcom,ci-hdrc + - chipidea,usb2 + - xlnx,zynq-usb-2.20a + - nvidia,tegra20-udc + - nvidia,tegra30-udc + - nvidia,tegra114-udc + - nvidia,tegra124-udc + - items: + - const: fsl,imx6q-usb + - const: fsl,imx27-usb + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + phy_type: + $ref: /schemas/types.yaml#/definitions/string + description: The type of the PHY connected to the core. Without this property the PORTSC + register won't be touched. + enum: + - utmi + - utmi_wide + - ulpi + - serial + - hsic + + dr_mode: + $ref: /schemas/types.yaml#/definitions/string + description: dual-role mode of the interface + enum: + - host + - peripheral + - otg + default: + const: otg + + clocks: + items: + - description: reference to the USB clock + + resets: + items: + - description: reference to the USB reset + + reset-names: + items: + - const: usb + + phys: + items: + - description: reference to the USB PHY + + phy-names: + items: + - const: usb-phy + + vbus-supply: + description: reference to the VBUS regulator + + maximum-speed: + description: limit the maximum connection speed to "full-speed". + + tpl-support: + description: TPL (Targeted Peripheral List) feature for targeted hosts + + itc-setting: + description: Interrupt threshold control register control, the setting should be aligned with + ITC bits at register USBCMD. + + ahb-burst-config: + $ref: /schemas/types.yaml#/definitions/uint32 + description: This vendor-dependent property is used to change the AHB burst configuration and + should be aligned with AHBBRST at SBUSCFG. See the ChipIdea specification for the details on + each of those values. If this property does not exist, the reset value will be used. + minimum: 0 + maximum: 7 + + tx-burst-size-dword: + description: This vendor-dependent property is used to configure the TX burst size (in 32-bit + words). The value represents the maximum length of a burst while moving data from system + memory to the USB bus. This property takes effect only if the "ahb-burst-config" property is + set to 0. If this property is missing the reset default of the hardware implementation will + be used. + + rx-burst-size-dword: + description: This vendor-dependent property is used to configure the RX burst size (in 32-bit + words). This value represents the maximum length of a burst while moving data from the USB + bus to system memory. This property takes effect only if the "ahb-burst-config" property is + set to 0. If this property is missing the reset default of the hardware implementation will + be used. + + extcon: + description: A list of phandles to external connector devices. The first phandle should point + to the external connector which provides "USB" cable events. The second should point to the + external connector device that provide "USB-HOST" cable events. If one of the external + connector devices is not required, an empty phandle (0) should be specified. + + phy-clkgate-delay-us: + description: The delay time (in microseconds) between putting the PHY into low power mode and + gating the PHY clock. + + non-zero-ttctrl-ttha: + description: | + After setting this property, the value of register ttctrl.ttha will be 0x7f; if not, the + value will be 0x0 (the default). The value for this property needs to be chosen very + carefully after consulting with your IC engineer. + + On most ChipIdea platforms, the "usage_tt" flag at RTL is 0, so this property only affects + siTD. + + If this property is not set, the maximum packet size is 1023 bytes, and if the total packet + size for previous transactions is more than 256 bytes, no further transactions can be + accepted within the frame. The use case is single transaction, but higher frame rate. + + If this property is set, the maximum packet size is limited to 188 bytes and more + transactions than in the above case can be handled. Transactions will be accepted as long as + 188 bytes or more of space are left within a frame. Software needs to make sure it does not + send more than 90% maximum_periodic_data_per_frame. The use case is higher amount of + transactions at the cost of a lower frame rate. + + mux-controls: + description: The mux control for toggling host/device output of this controller. It's expected + that a mux state of 0 indicates device mode and a mux state of 1 indicates host mode. + + mux-control-names: + const: usb_switch + + pinctrl-names: + description: In case of HSIC-mode, "idle" and "active" pin modes are mandatory. In this case, + the "idle" state needs to pull down the data and strobe pin and the "active" state needs to + pull up the strobe pin. + minItems: 1 + maxItems: 5 + items: + enum: + - default + - host + - device + - idle # mandatory for HSIC + - active # mandatory for HSIC + + # i.MX specific properties + fsl,usbmisc: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: phandle to non-core register device, with one argument that indicate USB + controller index. + + disable-over-current: + $ref: /schemas/types.yaml#/definitions/flag + description: disable over current detect + + over-current-active-low: + $ref: /schemas/types.yaml#/definitions/flag + description: Over-current signal polarity is active low. It's recommended to specify the + over-current polarity. + + over-current-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: Over-current signal polarity is active high. It's recommended to specify the + over-current polarity. + + power-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: power signal polarity is active high + + external-vbus-divider: + $ref: /schemas/types.yaml#/definitions/flag + description: enables off-chip resistor divider for Vbus + + samsung,picophy-pre-emp-curr-control: + $ref: /schemas/types.yaml#/definitions/uint32 + description: HS Transmitter Pre-Emphasis Current Control. This signal controls the amount of + current sourced to the USB_OTG*_DP and USB_OTG*_DN pins after a J-to-K or K-to-J transition. + Refer to the TXPREEMPAMPTUNE0 bits of register USBNC_n_PHY_CFG1 in the documentation for + more details. + minimum: 0 + maximum: 3 + default: 1 + + samsung,picophy-dc-vol-level-adjust: + $ref: /schemas/types.yaml#/definitions/uint32 + description: HS DC Voltage Level Adjustment. Adjust the high-speed transmitter DC level + voltage. Refer to the TXVREFTUNE0 bits of register USBNC_n_PHY_CFG1 in the documentation for + more details. + minimum: 0 + maximum: 0xf + default: 3 + + # NVIDIA Tegra specific properties + nvidia,needs-double-reset: + $ref: /schemas/types.yaml#/definitions/flag + description: Specifies a workaround for the USB1 port that needs to be reset twice internally + some Tegra devices. + + # deprecated properties + usb-phy: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle for the PHY device. Use "phys" instead. + deprecated: true + + fsl,usbphy: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle of usb phy that connects to the port. Use "phys" instead. + deprecated: true + + nvidia,phy: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle for the PHY device. Use "phys" instead. + deprecated: true + + # USB bus + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^pinctrl-[0-9]+$": true + +additionalProperties: + $ref: usb-device.yaml + +required: + - compatible + - reg + - interrupts + +dependencies: + mux-control-names: [ mux-controls ] + +examples: + - | + #include + #include + + usb@f7ed0000 { + compatible = "chipidea,usb2"; + reg = <0xf7ed0000 0x10000>; + interrupts = ; + clocks = <&chip CLKID_USB0>; + phys = <&usb_phy0>; + phy-names = "usb-phy"; + vbus-supply = <®_usb0_vbus>; + itc-setting = <0x4>; /* 4 micro-frames */ + /* Incremental burst of unspecified length */ + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; /* 64 bytes */ + rx-burst-size-dword = <0x10>; + extcon = <0>, <&usb_id>; + phy-clkgate-delay-us = <400>; + mux-controls = <&usb_switch>; + mux-control-names = "usb_switch"; + }; + + # HSIC + - | + #include + #include + + usb@2184400 { + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = ; + clocks = <&clks IMX6QDL_CLK_USBOH3>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc 2>; + phy_type = "hsic"; + dr_mode = "host"; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + pinctrl-names = "idle", "active"; + pinctrl-0 = <&pinctrl_usbh2_idle>; + pinctrl-1 = <&pinctrl_usbh2_active>; + #address-cells = <1>; + #size-cells = <0>; + + usbnet: smsc@1 { + compatible = "usb424,9730"; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt deleted file mode 100644 index a5c5db6a0b2d..000000000000 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ /dev/null @@ -1,158 +0,0 @@ -* USB2 ChipIdea USB controller for ci13xxx - -Required properties: -- compatible: should be one of: - "fsl,imx23-usb" - "fsl,imx27-usb" - "fsl,imx28-usb" - "fsl,imx6q-usb" - "fsl,imx6sl-usb" - "fsl,imx6sx-usb" - "fsl,imx6ul-usb" - "fsl,imx7d-usb" - "fsl,imx7ulp-usb" - "lsi,zevio-usb" - "qcom,ci-hdrc" - "chipidea,usb2" - "xlnx,zynq-usb-2.20a" - "nvidia,tegra20-udc" - "nvidia,tegra30-udc" - "nvidia,tegra114-udc" - "nvidia,tegra124-udc" -- reg: base address and length of the registers -- interrupts: interrupt for the USB controller - -Recommended properies: -- phy_type: the type of the phy connected to the core. Should be one - of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this - property the PORTSC register won't be touched. -- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" - -Deprecated properties: -- usb-phy: phandle for the PHY device. Use "phys" instead. -- fsl,usbphy: phandle of usb phy that connects to the port. Use "phys" instead. - -Optional properties: -- clocks: reference to the USB clock -- phys: reference to the USB PHY -- phy-names: should be "usb-phy" -- vbus-supply: reference to the VBUS regulator -- maximum-speed: limit the maximum connection speed to "full-speed". -- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts -- itc-setting: interrupt threshold control register control, the setting - should be aligned with ITC bits at register USBCMD. -- ahb-burst-config: it is vendor dependent, the required value should be - aligned with AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This - property is used to change AHB burst configuration, check the chipidea - spec for meaning of each value. If this property is not existed, it - will use the reset value. -- tx-burst-size-dword: it is vendor dependent, the tx burst size in dword - (4 bytes), This register represents the maximum length of a the burst - in 32-bit words while moving data from system memory to the USB - bus, the value of this property will only take effect if property - "ahb-burst-config" is set to 0, if this property is missing the reset - default of the hardware implementation will be used. -- rx-burst-size-dword: it is vendor dependent, the rx burst size in dword - (4 bytes), This register represents the maximum length of a the burst - in 32-bit words while moving data from the USB bus to system memory, - the value of this property will only take effect if property - "ahb-burst-config" is set to 0, if this property is missing the reset - default of the hardware implementation will be used. -- extcon: phandles to external connector devices. First phandle should point to - external connector, which provide "USB" cable events, the second should point - to external connector device, which provide "USB-HOST" cable events. If one - of the external connector devices is not required, empty <0> phandle should - be specified. -- phy-clkgate-delay-us: the delay time (us) between putting the PHY into - low power mode and gating the PHY clock. -- non-zero-ttctrl-ttha: after setting this property, the value of register - ttctrl.ttha will be 0x7f; if not, the value will be 0x0, this is the default - value. It needs to be very carefully for setting this property, it is - recommended that consult with your IC engineer before setting this value. - On the most of chipidea platforms, the "usage_tt" flag at RTL is 0, so this - property only affects siTD. - If this property is not set, the max packet size is 1023 bytes, and if - the total of packet size for pervious transactions are more than 256 bytes, - it can't accept any transactions within this frame. The use case is single - transaction, but higher frame rate. - If this property is set, the max packet size is 188 bytes, it can handle - more transactions than above case, it can accept transactions until it - considers the left room size within frame is less than 188 bytes, software - needs to make sure it does not send more than 90% - maximum_periodic_data_per_frame. The use case is multiple transactions, but - less frame rate. -- mux-controls: The mux control for toggling host/device output of this - controller. It's expected that a mux state of 0 indicates device mode and a - mux state of 1 indicates host mode. -- mux-control-names: Shall be "usb_switch" if mux-controls is specified. -- pinctrl-names: Names for optional pin modes in "default", "host", "device". - In case of HSIC-mode, "idle" and "active" pin modes are mandatory. In this - case, the "idle" state needs to pull down the data and strobe pin - and the "active" state needs to pull up the strobe pin. -- pinctrl-n: alternate pin modes - -i.mx specific properties -- fsl,usbmisc: phandler of non-core register device, with one - argument that indicate usb controller index -- disable-over-current: disable over current detect -- over-current-active-low: over current signal polarity is active low. -- over-current-active-high: over current signal polarity is active high. - It's recommended to specify the over current polarity. -- power-active-high: power signal polarity is active high -- external-vbus-divider: enables off-chip resistor divider for Vbus -- samsung,picophy-pre-emp-curr-control: HS Transmitter Pre-Emphasis Current - Control. This signal controls the amount of current sourced to the - USB_OTG*_DP and USB_OTG*_DN pins after a J-to-K or K-to-J transition. - The range is from 0x0 to 0x3, the default value is 0x1. - Details can refer to TXPREEMPAMPTUNE0 bits of USBNC_n_PHY_CFG1. -- samsung,picophy-dc-vol-level-adjust: HS DC Voltage Level Adjustment. - Adjust the high-speed transmitter DC level voltage. - The range is from 0x0 to 0xf, the default value is 0x3. - Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1. - -Example: - - usb@f7ed0000 { - compatible = "chipidea,usb2"; - reg = <0xf7ed0000 0x10000>; - interrupts = ; - clocks = <&chip CLKID_USB0>; - phys = <&usb_phy0>; - phy-names = "usb-phy"; - vbus-supply = <®_usb0_vbus>; - itc-setting = <0x4>; /* 4 micro-frames */ - /* Incremental burst of unspecified length */ - ahb-burst-config = <0x0>; - tx-burst-size-dword = <0x10>; /* 64 bytes */ - rx-burst-size-dword = <0x10>; - extcon = <0>, <&usb_id>; - phy-clkgate-delay-us = <400>; - mux-controls = <&usb_switch>; - mux-control-names = "usb_switch"; - }; - -Example for HSIC: - - usb@2184400 { - compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; - reg = <0x02184400 0x200>; - interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_USBOH3>; - fsl,usbphy = <&usbphynop1>; - fsl,usbmisc = <&usbmisc 2>; - phy_type = "hsic"; - dr_mode = "host"; - ahb-burst-config = <0x0>; - tx-burst-size-dword = <0x10>; - rx-burst-size-dword = <0x10>; - pinctrl-names = "idle", "active"; - pinctrl-0 = <&pinctrl_usbh2_idle>; - pinctrl-1 = <&pinctrl_usbh2_active>; - #address-cells = <1>; - #size-cells = <0>; - - usbnet: smsc@1 { - compatible = "usb424,9730"; - reg = <1>; - }; - };