diff mbox series

ARM: tegra: add -hog to gpios hogs

Message ID 20211028132152.44232-1-david@ixit.cz
State Superseded
Headers show
Series ARM: tegra: add -hog to gpios hogs | expand

Commit Message

David Heidelberg Oct. 28, 2021, 1:21 p.m. UTC 
Comply with dt-schema, fixes warnings as:
$ make dtbs_check
...
arch/arm/boot/dts/tegra30-apalis-eval.dt.yaml: pex-perst-n: $nodename:0: 'pex-perst-n' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
	From schema: /home/runner/.local/lib/python3.8/site-packages/dtschema/schemas/gpio/gpio-hog.yaml
...

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 arch/arm/boot/dts/tegra124-apalis-eval.dts      | 2 +-
 arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts | 2 +-
 arch/arm/boot/dts/tegra20-colibri.dtsi          | 6 +++---
 arch/arm/boot/dts/tegra30-apalis-eval.dts       | 2 +-
 arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts  | 2 +-
 arch/arm/boot/dts/tegra30-colibri.dtsi          | 2 +-
 6 files changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index 28c29b6813a7..3209554ec7e6 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -246,7 +246,7 @@  reg_usbh_vbus: regulator-usbh-vbus {
 
 &gpio {
 	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n {
+	pex-perst-n-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
index f3afde410615..814257c79bf1 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
@@ -248,7 +248,7 @@  reg_usbh_vbus: regulator-usbh-vbus {
 
 &gpio {
 	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n {
+	pex-perst-n-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi
index 375b60eb03af..618d35647a43 100644
--- a/arch/arm/boot/dts/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri.dtsi
@@ -749,7 +749,7 @@  &emc_icc_dvfs_opp_table {
 };
 
 &gpio {
-	lan-reset-n {
+	lan-reset-n-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -757,7 +757,7 @@  lan-reset-n {
 	};
 
 	/* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
-	npwe {
+	npwe-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -765,7 +765,7 @@  npwe {
 	};
 
 	/* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
-	rdnwr {
+	rdnwr-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
index 9f653ef41da4..93b83b3c5655 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -239,7 +239,7 @@  reg_usbh_vbus: regulator-usbh-vbus {
 
 &gpio {
 	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n {
+	pex-perst-n-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
index 86e138e8c7f0..fbfa75e53f32 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -257,7 +257,7 @@  reg_vddio_sdmmc3: regulator-vddio-sdmmc3 {
 
 &gpio {
 	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
-	pex-perst-n {
+	pex-perst-n-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 64e4a375bfb1..9cfc6c7d2065 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -1056,7 +1056,7 @@  sound {
 };
 
 &gpio {
-	lan-reset-n {
+	lan-reset-n-hog {
 		gpio-hog;
 		gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
 		output-high;