diff mbox series

[1/4] ARM64: Tegra: Enable I2C controller for EEPROM

Message ID 20200224143436.5438-1-jonathanh@nvidia.com
State Accepted
Headers show
Series [1/4] ARM64: Tegra: Enable I2C controller for EEPROM | expand

Commit Message

Jon Hunter Feb. 24, 2020, 2:34 p.m. UTC 
Commit a5b6b67364cb ("arm64: tegra: Add ID EEPROM for Jetson TX1
module") populated the EEPROM on the Jetson TX1 module, but did not
enable the corresponding I2C controller. Enable the I2C controller so
that this EEPROM can be accessed.

Fixes: a5b6b67364cb ("arm64: tegra: Add ID EEPROM for Jetson TX1 module")

Cc: <stable@vger.kernel.org>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index cb58f79deb48..95b1a6e76e6e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -265,6 +265,8 @@ 
 	};
 
 	i2c@7000c500 {
+		status = "okay";
+
 		/* module ID EEPROM */
 		eeprom@50 {
 			compatible = "atmel,24c02";