| Message ID | 20191003205033.98381-2-swarren@wwwdotorg.org |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [V3,1/4] clk: tegra: mark fuse clock as critical | expand |
On Thu, Oct 03, 2019 at 02:50:31PM -0600, Stephen Warren wrote: > From: Stephen Warren <swarren@nvidia.com> > > For a little over a year, U-Boot has configured the flow controller to > perform automatic RAM re-repair on off->on power transitions of the CPU > rail1]. This is mandatory for correct operation of Tegra124. However, RAM > re-repair relies on certain clocks, which the kernel must enable and > leave running. PLLP is one of those clocks. This clock is shut down > during LP1 in order to save power. Enable bypass (which I believe routes > osc_div_clk, essentially the crystal clock, to the PLL output) so that > this clock signal toggles even though the PLL is not active. This is > required so that LP1 power mode (system suspend) operates correctly. > > The bypass configuration must then be undone when resuming from LP1, so > that all peripheral clocks run at the expected rate. Without this, many > peripherals won't work correctly; for example, the UART baud rate would > be incorrect. > > NVIDIA's downstream kernel code only does this if not compiled for > Tegra30, so the added code is made conditional upon the chip ID. NVIDIA's > downstream code makes this change conditional upon the active CPU > cluster. The upstream kernel currently doesn't support cluster switching, > so this patch doesn't test the active CPU cluster ID. > > [1] 3cc7942a4ae5 ARM: tegra: implement RAM repair > > Reported-by: Jonathan Hunter <jonathanh@nvidia.com> > Cc: stable@vger.kernel.org > Signed-off-by: Stephen Warren <swarren@nvidia.com> > --- > v3: No change. > v2: No change. > --- > arch/arm/mach-tegra/sleep-tegra30.S | 11 +++++++++++ > 1 file changed, 11 insertions(+) Patches 2-4 applied to for-5.6/arm/core, thanks. Thierry
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index b408fa56eb89..6922dd8d3e2d 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -370,6 +370,14 @@ _pll_m_c_x_done: pll_locked r1, r0, CLK_RESET_PLLC_BASE pll_locked r1, r0, CLK_RESET_PLLX_BASE + tegra_get_soc_id TEGRA_APB_MISC_BASE, r1 + cmp r1, #TEGRA30 + beq 1f + ldr r1, [r0, #CLK_RESET_PLLP_BASE] + bic r1, r1, #(1<<31) @ disable PllP bypass + str r1, [r0, #CLK_RESET_PLLP_BASE] +1: + mov32 r7, TEGRA_TMRUS_BASE ldr r1, [r7] add r1, r1, #LOCK_DELAY @@ -630,7 +638,10 @@ tegra30_switch_cpu_to_clk32k: str r0, [r4, #PMC_PLLP_WB0_OVERRIDE] /* disable PLLP, PLLA, PLLC and PLLX */ + tegra_get_soc_id TEGRA_APB_MISC_BASE, r1 + cmp r1, #TEGRA30 ldr r0, [r5, #CLK_RESET_PLLP_BASE] + orrne r0, r0, #(1 << 31) @ enable PllP bypass on fast cluster bic r0, r0, #(1 << 30) str r0, [r5, #CLK_RESET_PLLP_BASE] ldr r0, [r5, #CLK_RESET_PLLA_BASE]