[v2,07/34] ARM: tegra: apalis_t30: regulator clean-up

Message ID	20180831163817.23970-8-marcel@ziswiler.com
State	Accepted
Headers	show Return-Path: <linux-tegra-owner@vger.kernel.org> From: Marcel Ziswiler <marcel@ziswiler.com> To: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>, Thierry Reding <thierry.reding@gmail.com>, Jonathan Hunter <jonathanh@nvidia.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Subject: [PATCH v2 07/34] ARM: tegra: apalis_t30: regulator clean-up Date: Fri, 31 Aug 2018 18:37:49 +0200 Message-Id: <20180831163817.23970-8-marcel@ziswiler.com> In-Reply-To: <20180831163817.23970-1-marcel@ziswiler.com> References: <20180831163817.23970-1-marcel@ziswiler.com> Sender: linux-tegra-owner@vger.kernel.org Precedence: bulk
Series	ARM: dts: tegra: apalis_t30: major revamp incl. v1.1 hardware support \| expand [v2,00/34] ARM: dts: tegra: apalis_t30: major revamp incl. v1.1 hardware support [v2,01/34] ARM: tegra: apalis_t30: fix mmc1 cmd pull-up [v2,02/34] ARM: tegra: apalis_t30: pull-up sd card detect pins [v2,03/34] ARM: tegra: apalis_t30: add local-mac-address property [v2,04/34] ARM: tegra: apalis_t30: reorder pcie properties [v2,05/34] ARM: tegra: apalis_t30: annotate/clean-up pcie controller/port nodes [v2,06/34] ARM: tegra: apalis_t30: reorder host1x/hdmi properties [v2,07/34] ARM: tegra: apalis_t30: regulator clean-up [v2,08/34] ARM: tegra: apalis_t30: add missing regulators [v2,09/34] ARM: tegra: apalis_t30: annotate uarts and move compatible to board [v2,10/34] ARM: tegra: apalis_t30: drop unused cami2c label [v2,11/34] ARM: tegra: apalis_t30: white-space/newline clean-up [v2,12/34] ARM: tegra: apalis_t30: drop unused mmc1/sd1 labels [v2,13/34] ARM: tegra: apalis_t30: annotate mmc1/sd1 [v2,14/34] ARM: tegra: apalis_t30: move dr_mode property from phy to controller [v2,15/34] ARM: tegra: apalis_t30: reorder backlight properties [v2,16/34] ARM: tegra: apalis_t30: drop pwmleds [v2,17/34] ARM: tegra: apalis_t30: pinmux clean-up [v2,18/34] ARM: tegra: apalis_t30: add missing pinmux [v2,19/34] ARM: tegra: apalis_t30: use proper irq-gpio for stmpe811 [v2,20/34] ARM: tegra: apalis_t30: further lm95245 temperature sensor annotation [v2,21/34] ARM: tegra: apalis_t30: add i2c-thermtrip [v2,22/34] ARM: tegra: apalis_t30: add proper emmc vmmc and vqmmc supplies [v2,23/34] ARM: tegra: apalis_t30: enable emmc ddr52 mode [v2,24/34] ARM: tegra: apalis_t30: get rid of fake clocks simple bus [v2,25/34] ARM: tegra: apalis_t30: line break long compatible property line [v2,26/34] dt-bindings: add broadcom (formerly plx technology) vendor prefix [v2,27/34] ARM: tegra: apalis_t30: drop module level model and compatible [v2,28/34] ARM: tegra: apalis_t30: drop obsolete spidev nodes [v2,29/34] ARM: tegra: apalis_t30: hog group for pcie switch reset gpio [v2,30/34] ARM: tegra: apalis_t30: rename hdmiddc to hdmi_ddc [v2,31/34] ARM: tegra: apalis_t30: rename tps65911@2d, stmpe811@41 and tps62362@60 [v2,32/34] ARM: tegra: apalis_t30: fix mcp2515 can controller interrupt polarity [v2,33/34] ARM: tegra: apalis_t30: move hda node from carrier to module [v2,34/34] ARM: tegra: apalis_t30: support v1.1 hardware revision

diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index e3c70e7d8d37..07da481bc441 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -153,7 +153,7 @@ usb-phy@7d000000 { status = "okay"; dr_mode = "otg"; - vbus-supply = <&usbo1_vbus_reg>; + vbus-supply = <&reg_usbo1_vbus>; }; /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ @@ -163,7 +163,7 @@ usb-phy@7d004000 { status = "okay"; - vbus-supply = <&usbh_vbus_reg>; + vbus-supply = <&reg_usbh_vbus>; }; /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ @@ -173,7 +173,7 @@ usb-phy@7d008000 { status = "okay"; - vbus-supply = <&usbh_vbus_reg>; + vbus-supply = <&reg_usbh_vbus>; }; backlight: backlight { @@ -231,38 +231,32 @@ }; }; - regulators { - sys_5v0_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; - /* USBO1_EN */ - usbo1_vbus_reg: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usbo1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&sys_5v0_reg>; - }; + /* USBO1_EN */ + reg_usbo1_vbus: regulator-usbo1-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USBO1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&reg_5v0>; + }; - /* USBH_EN */ - usbh_vbus_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "usbh_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&sys_5v0_reg>; - }; + /* USBH_EN */ + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USBH(2A|2C|2D|3|4)"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&reg_5v0>; }; }; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 648db524abae..214a23722ab4 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -20,8 +20,8 @@ avdd-pexb-supply = <&vdd2_reg>; avdd-pex-pll-supply = <&vdd2_reg>; avdd-plle-supply = <&ldo6_reg>; - hvdd-pex-supply = <&sys_3v3_reg>; - vddio-pex-ctl-supply = <&sys_3v3_reg>; + hvdd-pex-supply = <&reg_module_3v3>; + vddio-pex-ctl-supply = <&reg_module_3v3>; vdd-pexa-supply = <&vdd2_reg>; vdd-pexb-supply = <&vdd2_reg>; @@ -51,8 +51,8 @@ nvidia,ddc-i2c-bus = <&hdmiddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; - pll-supply = <&avdd_hdmi_pll_1v8_reg>; - vdd-supply = <&avdd_hdmi_3v3_reg>; + pll-supply = <&reg_1v8_avdd_hdmi_pll>; + vdd-supply = <&reg_3v3_avdd_hdmi>; }; }; @@ -465,8 +465,8 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - VDDA-supply = <&sys_3v3_reg>; - VDDIO-supply = <&sys_3v3_reg>; + VDDA-supply = <&reg_module_3v3>; + VDDIO-supply = <&reg_module_3v3>; clocks = <&tegra_car TEGRA30_CLK_EXTERN1>; }; @@ -483,43 +483,38 @@ #gpio-cells = <2>; gpio-controller; - vcc1-supply = <&sys_3v3_reg>; - vcc2-supply = <&sys_3v3_reg>; - vcc3-supply = <&vio_reg>; - vcc4-supply = <&sys_3v3_reg>; - vcc5-supply = <&sys_3v3_reg>; - vcc6-supply = <&vio_reg>; - vcc7-supply = <&charge_pump_5v0_reg>; - vccio-supply = <&sys_3v3_reg>; + vcc1-supply = <&reg_module_3v3>; + vcc2-supply = <&reg_module_3v3>; + vcc3-supply = <&reg_1v8_vio>; + vcc4-supply = <&reg_module_3v3>; + vcc5-supply = <&reg_module_3v3>; + vcc6-supply = <&reg_1v8_vio>; + vcc7-supply = <&reg_5v0_charge_pump>; + vccio-supply = <&reg_module_3v3>; regulators { - /* SW1: +V1.35_VDDIO_DDR */ vdd1_reg: vdd1 { - regulator-name = "vddio_ddr_1v35"; + regulator-name = "+V1.35_VDDIO_DDR"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; }; - /* SW2: +V1.05 */ vdd2_reg: vdd2 { - regulator-name = - "vdd_pexa,vdd_pexb,vdd_sata"; + regulator-name = "+V1.05"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; }; - /* SW CTRL: +V1.0_VDD_CPU */ vddctrl_reg: vddctrl { - regulator-name = "vdd_cpu,vdd_sys"; + regulator-name = "+V1.0_VDD_CPU"; regulator-min-microvolt = <1150000>; regulator-max-microvolt = <1150000>; regulator-always-on; }; - /* SWIO: +V1.8 */ - vio_reg: vio { - regulator-name = "vdd_1v8_gen"; + reg_1v8_vio: vio { + regulator-name = "+V1.8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -529,27 +524,24 @@ /* * EN_+V3.3 switching via FET: - * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN - * see also v3_3 fixed supply + * +V3.3_AUDIO_AVDD_S, +V3.3 + * see also +V3.3 fixed supply */ ldo2_reg: ldo2 { - regulator-name = "en_3v3"; + regulator-name = "EN_+V3.3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - /* +V1.2_CSI */ ldo3_reg: ldo3 { - regulator-name = - "avdd_dsi_csi,pwrdet_mipi"; + regulator-name = "+V1.2_CSI"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - /* +V1.2_VDD_RTC */ ldo4_reg: ldo4 { - regulator-name = "vdd_rtc"; + regulator-name = "+V1.2_VDD_RTC"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -557,10 +549,10 @@ /* * +V2.8_AVDD_VDAC: - * only required for analog RGB + * only required for (unsupported) analog RGB */ ldo5_reg: ldo5 { - regulator-name = "avdd_vdac"; + regulator-name = "+V2.8_AVDD_VDAC"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; @@ -572,22 +564,20 @@ * granularity */ ldo6_reg: ldo6 { - regulator-name = "avdd_plle"; + regulator-name = "+V1.05_AVDD_PLLE"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; }; - /* +V1.2_AVDD_PLL */ ldo7_reg: ldo7 { - regulator-name = "avdd_pll"; + regulator-name = "+V1.2_AVDD_PLL"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - /* +V1.0_VDD_DDR_HS */ ldo8_reg: ldo8 { - regulator-name = "vdd_ddr_hs"; + regulator-name = "+V1.0_VDD_DDR_HS"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; @@ -732,50 +722,40 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - avdd_hdmi_pll_1v8_reg: regulator@100 { - compatible = "regulator-fixed"; - reg = <100>; - regulator-name = "+V1.8_AVDD_HDMI_PLL"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - enable-active-high; - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - vin-supply = <&vio_reg>; - }; + reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll { + compatible = "regulator-fixed"; + regulator-name = "+V1.8_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&reg_1v8_vio>; + }; - sys_3v3_reg: regulator@101 { - compatible = "regulator-fixed"; - reg = <101>; - regulator-name = "3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&reg_module_3v3>; + }; - avdd_hdmi_3v3_reg: regulator@102 { - compatible = "regulator-fixed"; - reg = <102>; - regulator-name = "+V3.3_AVDD_HDMI"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - vin-supply = <&sys_3v3_reg>; - }; + reg_5v0_charge_pump: regulator-5v0-charge-pump { + compatible = "regulator-fixed"; + regulator-name = "+V5.0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - charge_pump_5v0_reg: regulator@103 { - compatible = "regulator-fixed"; - reg = <103>; - regulator-name = "5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound {

[v2,07/34] ARM: tegra: apalis_t30: regulator clean-up

Commit Message

Patch