| Message ID | 20160707193711.5891-1-swarren@wwwdotorg.org |
|---|---|
| State | Deferred |
| Headers | show |
On Thu, Jul 07, 2016 at 01:37:11PM -0600, Stephen Warren wrote: > From: Stephen Warren <swarren@nvidia.com> > > In Tegra186, the BPMP (Boot and Power Management Processor) owns certain > HW devices, such as the I2C controller for the power management I2C bus. > Software running on other CPUs must perform IPC to the BPMP in order to > execute transactions on that I2C bus. This binding describes an I2C bus > that is accessed in such a fashion. > > Signed-off-by: Stephen Warren <swarren@nvidia.com> > --- > .../bindings/i2c/nvidia,tegra186-bpmp-i2c.txt | 35 ++++++++++++++++++++++ > 1 file changed, 35 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt > > diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt > new file mode 100644 > index 000000000000..eb9f70723ab7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt > @@ -0,0 +1,35 @@ > +NVIDIA Tegra186 BPMP I2C controller > + > +In Tegra186, the BPMP (Boot and Power Management Processor) owns certain HW > +devices, such as the I2C controller for the power management I2C bus. Software > +running on other CPUs must perform IPC to the BPMP in order to execute > +transactions on that I2C bus. This binding describes an I2C bus that is > +accessed in such a fashion. > + > +Required properties: > +- compatible: > + Array of strings. > + One of: > + - "nvidia,tegra186-bpmp-i2c". > +- address-cells: Address cells for I2C device address. > + Single-cell integer. > + Must be <1>. > +- size-cells: > + Single-cell integer. > + Must be <0>. > +- nvidia,bpmp: > + The phandle to the BPMP device. Any reason to not make this a sub-node of the BPMP device? -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/16/2016 03:07 PM, Rob Herring wrote: > On Thu, Jul 07, 2016 at 01:37:11PM -0600, Stephen Warren wrote: >> From: Stephen Warren <swarren@nvidia.com> >> >> In Tegra186, the BPMP (Boot and Power Management Processor) owns certain >> HW devices, such as the I2C controller for the power management I2C bus. >> Software running on other CPUs must perform IPC to the BPMP in order to >> execute transactions on that I2C bus. This binding describes an I2C bus >> that is accessed in such a fashion. >> >> Signed-off-by: Stephen Warren <swarren@nvidia.com> >> --- >> .../bindings/i2c/nvidia,tegra186-bpmp-i2c.txt | 35 ++++++++++++++++++++++ >> 1 file changed, 35 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >> >> diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >> new file mode 100644 >> index 000000000000..eb9f70723ab7 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >> @@ -0,0 +1,35 @@ >> +NVIDIA Tegra186 BPMP I2C controller >> + >> +In Tegra186, the BPMP (Boot and Power Management Processor) owns certain HW >> +devices, such as the I2C controller for the power management I2C bus. Software >> +running on other CPUs must perform IPC to the BPMP in order to execute >> +transactions on that I2C bus. This binding describes an I2C bus that is >> +accessed in such a fashion. >> + >> +Required properties: >> +- compatible: >> + Array of strings. >> + One of: >> + - "nvidia,tegra186-bpmp-i2c". >> +- address-cells: Address cells for I2C device address. >> + Single-cell integer. >> + Must be <1>. >> +- size-cells: >> + Single-cell integer. >> + Must be <0>. >> +- nvidia,bpmp: >> + The phandle to the BPMP device. > > Any reason to not make this a sub-node of the BPMP device? That would be possible too. My thought process was along the lines of: The system has an I2C bus, which deserves a DT node. That fact seemed more important than the access mechanism; the fact it's accessed via BPMP rather than direct register access felt a bit more like an implementation detail. Still, I suppose we could flip it around and store the node underneath the BPMP if you want; let me know. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jul 18, 2016 at 11:16 AM, Stephen Warren <swarren@wwwdotorg.org> wrote: > On 07/16/2016 03:07 PM, Rob Herring wrote: >> >> On Thu, Jul 07, 2016 at 01:37:11PM -0600, Stephen Warren wrote: >>> >>> From: Stephen Warren <swarren@nvidia.com> >>> >>> In Tegra186, the BPMP (Boot and Power Management Processor) owns certain >>> HW devices, such as the I2C controller for the power management I2C bus. >>> Software running on other CPUs must perform IPC to the BPMP in order to >>> execute transactions on that I2C bus. This binding describes an I2C bus >>> that is accessed in such a fashion. >>> >>> Signed-off-by: Stephen Warren <swarren@nvidia.com> >>> --- >>> .../bindings/i2c/nvidia,tegra186-bpmp-i2c.txt | 35 >>> ++++++++++++++++++++++ >>> 1 file changed, 35 insertions(+) >>> create mode 100644 >>> Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >>> >>> diff --git >>> a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >>> b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >>> new file mode 100644 >>> index 000000000000..eb9f70723ab7 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >>> @@ -0,0 +1,35 @@ >>> +NVIDIA Tegra186 BPMP I2C controller >>> + >>> +In Tegra186, the BPMP (Boot and Power Management Processor) owns certain >>> HW >>> +devices, such as the I2C controller for the power management I2C bus. >>> Software >>> +running on other CPUs must perform IPC to the BPMP in order to execute >>> +transactions on that I2C bus. This binding describes an I2C bus that is >>> +accessed in such a fashion. >>> + >>> +Required properties: >>> +- compatible: >>> + Array of strings. >>> + One of: >>> + - "nvidia,tegra186-bpmp-i2c". >>> +- address-cells: Address cells for I2C device address. >>> + Single-cell integer. >>> + Must be <1>. >>> +- size-cells: >>> + Single-cell integer. >>> + Must be <0>. >>> +- nvidia,bpmp: >>> + The phandle to the BPMP device. >> >> >> Any reason to not make this a sub-node of the BPMP device? > > > That would be possible too. > > My thought process was along the lines of: The system has an I2C bus, which > deserves a DT node. That fact seemed more important than the access > mechanism; the fact it's accessed via BPMP rather than direct register > access felt a bit more like an implementation detail. Still, I suppose we > could flip it around and store the node underneath the BPMP if you want; let > me know. I prefer to utilize the hierarchy unless there are reasons it can't be which doesn't seem to be the case here. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/18/2016 03:00 PM, Rob Herring wrote: > On Mon, Jul 18, 2016 at 11:16 AM, Stephen Warren <swarren@wwwdotorg.org> wrote: >> On 07/16/2016 03:07 PM, Rob Herring wrote: >>> >>> On Thu, Jul 07, 2016 at 01:37:11PM -0600, Stephen Warren wrote: >>>> >>>> From: Stephen Warren <swarren@nvidia.com> >>>> >>>> In Tegra186, the BPMP (Boot and Power Management Processor) owns certain >>>> HW devices, such as the I2C controller for the power management I2C bus. >>>> Software running on other CPUs must perform IPC to the BPMP in order to >>>> execute transactions on that I2C bus. This binding describes an I2C bus >>>> that is accessed in such a fashion. >>>> >>>> Signed-off-by: Stephen Warren <swarren@nvidia.com> >>>> --- >>>> .../bindings/i2c/nvidia,tegra186-bpmp-i2c.txt | 35 >>>> ++++++++++++++++++++++ >>>> 1 file changed, 35 insertions(+) >>>> create mode 100644 >>>> Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >>>> >>>> diff --git >>>> a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >>>> b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >>>> new file mode 100644 >>>> index 000000000000..eb9f70723ab7 >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >>>> @@ -0,0 +1,35 @@ >>>> +NVIDIA Tegra186 BPMP I2C controller >>>> + >>>> +In Tegra186, the BPMP (Boot and Power Management Processor) owns certain >>>> HW >>>> +devices, such as the I2C controller for the power management I2C bus. >>>> Software >>>> +running on other CPUs must perform IPC to the BPMP in order to execute >>>> +transactions on that I2C bus. This binding describes an I2C bus that is >>>> +accessed in such a fashion. >>>> + >>>> +Required properties: >>>> +- compatible: >>>> + Array of strings. >>>> + One of: >>>> + - "nvidia,tegra186-bpmp-i2c". >>>> +- address-cells: Address cells for I2C device address. >>>> + Single-cell integer. >>>> + Must be <1>. >>>> +- size-cells: >>>> + Single-cell integer. >>>> + Must be <0>. >>>> +- nvidia,bpmp: >>>> + The phandle to the BPMP device. >>> >>> >>> Any reason to not make this a sub-node of the BPMP device? >> >> >> That would be possible too. >> >> My thought process was along the lines of: The system has an I2C bus, which >> deserves a DT node. That fact seemed more important than the access >> mechanism; the fact it's accessed via BPMP rather than direct register >> access felt a bit more like an implementation detail. Still, I suppose we >> could flip it around and store the node underneath the BPMP if you want; let >> me know. > > I prefer to utilize the hierarchy unless there are reasons it can't be > which doesn't seem to be the case here. OK, how does the following look? If it seems OK, I'll write up the binding changes: > bpmp: bpmp { > compatible = "nvidia,tegra186-bpmp"; ... > #clock-cells = <1>; > #power-domain-cells = <1>; > #reset-cells = <1>; > > sub-devices { > #address-cells = <1>; > #size-cells = <0>; // There actually aren't any registers, so perhaps those two aren't // needed. Perhaps those two properties should be dropped? > > bpmp-i2c { > compatible = "nvidia,tegra186-bpmp-i2c"; > nvidia,bpmp-bus-id = <5>; > #address-cells = <1>; > #size-cells = <0>; > status = "disabled"; > }; > }; > }; Rationale: There may be more than 1 I2C bus, so we need a structure that can house n of them. It's plausible the BPMP could support other sub-device-types in the future that each need their own node, so it's useful to have a scheme that supports arbitrary sub-devices, each using compatible values to define what they are. We house the sub-devices in an explicit "sub-devices" node, rather than directly as children of the top-level bpmp node, so that the BPMP can separate any sub-nodes it uses for its own top-level configuration from sub-nodes that represent child-/sub-devices. This keeps things clean, and allows additions to the bpmp binding without complicating how sub-devices are enumerated. This is rather like the recent optinonal i2c-bus child node of I2C controllers. Sound good? -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jul 18, 2016 at 6:31 PM, Stephen Warren <swarren@wwwdotorg.org> wrote: > On 07/18/2016 03:00 PM, Rob Herring wrote: >> >> On Mon, Jul 18, 2016 at 11:16 AM, Stephen Warren <swarren@wwwdotorg.org> >> wrote: >>> >>> On 07/16/2016 03:07 PM, Rob Herring wrote: >>>> >>>> >>>> On Thu, Jul 07, 2016 at 01:37:11PM -0600, Stephen Warren wrote: >>>>> >>>>> >>>>> From: Stephen Warren <swarren@nvidia.com> >>>>> >>>>> In Tegra186, the BPMP (Boot and Power Management Processor) owns >>>>> certain >>>>> HW devices, such as the I2C controller for the power management I2C >>>>> bus. >>>>> Software running on other CPUs must perform IPC to the BPMP in order to >>>>> execute transactions on that I2C bus. This binding describes an I2C bus >>>>> that is accessed in such a fashion. >>>>> >>>>> Signed-off-by: Stephen Warren <swarren@nvidia.com> >>>>> --- >>>>> .../bindings/i2c/nvidia,tegra186-bpmp-i2c.txt | 35 >>>>> ++++++++++++++++++++++ >>>>> 1 file changed, 35 insertions(+) >>>>> create mode 100644 >>>>> Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >>>>> >>>>> diff --git >>>>> a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >>>>> b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >>>>> new file mode 100644 >>>>> index 000000000000..eb9f70723ab7 >>>>> --- /dev/null >>>>> +++ >>>>> b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >>>>> @@ -0,0 +1,35 @@ >>>>> +NVIDIA Tegra186 BPMP I2C controller >>>>> + >>>>> +In Tegra186, the BPMP (Boot and Power Management Processor) owns >>>>> certain >>>>> HW >>>>> +devices, such as the I2C controller for the power management I2C bus. >>>>> Software >>>>> +running on other CPUs must perform IPC to the BPMP in order to execute >>>>> +transactions on that I2C bus. This binding describes an I2C bus that >>>>> is >>>>> +accessed in such a fashion. >>>>> + >>>>> +Required properties: >>>>> +- compatible: >>>>> + Array of strings. >>>>> + One of: >>>>> + - "nvidia,tegra186-bpmp-i2c". >>>>> +- address-cells: Address cells for I2C device address. >>>>> + Single-cell integer. >>>>> + Must be <1>. >>>>> +- size-cells: >>>>> + Single-cell integer. >>>>> + Must be <0>. >>>>> +- nvidia,bpmp: >>>>> + The phandle to the BPMP device. >>>> >>>> >>>> >>>> Any reason to not make this a sub-node of the BPMP device? >>> >>> >>> >>> That would be possible too. >>> >>> My thought process was along the lines of: The system has an I2C bus, >>> which >>> deserves a DT node. That fact seemed more important than the access >>> mechanism; the fact it's accessed via BPMP rather than direct register >>> access felt a bit more like an implementation detail. Still, I suppose we >>> could flip it around and store the node underneath the BPMP if you want; >>> let >>> me know. >> >> >> I prefer to utilize the hierarchy unless there are reasons it can't be >> which doesn't seem to be the case here. > > > OK, how does the following look? If it seems OK, I'll write up the binding > changes: > >> bpmp: bpmp { >> compatible = "nvidia,tegra186-bpmp"; > > ... >> >> #clock-cells = <1>; >> #power-domain-cells = <1>; >> #reset-cells = <1>; >> >> sub-devices { >> #address-cells = <1>; >> #size-cells = <0>; > > // There actually aren't any registers, so perhaps those two aren't > // needed. Perhaps those two properties should be dropped? >> >> >> bpmp-i2c { >> compatible = "nvidia,tegra186-bpmp-i2c"; >> nvidia,bpmp-bus-id = <5>; Given you need this bus number, what about doing "i2c@5" for the node and using reg property. After all, that is how you "address" the bus. >> #address-cells = <1>; >> #size-cells = <0>; >> status = "disabled"; >> }; >> }; >> }; > > > Rationale: > > There may be more than 1 I2C bus, so we need a structure that can house n of > them. > > It's plausible the BPMP could support other sub-device-types in the future > that each need their own node, so it's useful to have a scheme that supports > arbitrary sub-devices, each using compatible values to define what they are. > > We house the sub-devices in an explicit "sub-devices" node, rather than > directly as children of the top-level bpmp node, so that the BPMP can > separate any sub-nodes it uses for its own top-level configuration from > sub-nodes that represent child-/sub-devices. This keeps things clean, and > allows additions to the bpmp binding without complicating how sub-devices > are enumerated. This is rather like the recent optinonal i2c-bus child node > of I2C controllers. > > Sound good? I'm not crazy about having the extra layer, but I'm not going to object. I'd argue that i2c@X is unique enough. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/18/2016 07:52 PM, Rob Herring wrote: > On Mon, Jul 18, 2016 at 6:31 PM, Stephen Warren <swarren@wwwdotorg.org> wrote: >> On 07/18/2016 03:00 PM, Rob Herring wrote: >>> >>> On Mon, Jul 18, 2016 at 11:16 AM, Stephen Warren <swarren@wwwdotorg.org> >>> wrote: >>>> >>>> On 07/16/2016 03:07 PM, Rob Herring wrote: >>>>> >>>>> >>>>> On Thu, Jul 07, 2016 at 01:37:11PM -0600, Stephen Warren wrote: >>>>>> >>>>>> >>>>>> From: Stephen Warren <swarren@nvidia.com> >>>>>> >>>>>> In Tegra186, the BPMP (Boot and Power Management Processor) owns >>>>>> certain >>>>>> HW devices, such as the I2C controller for the power management I2C >>>>>> bus. >>>>>> Software running on other CPUs must perform IPC to the BPMP in order to >>>>>> execute transactions on that I2C bus. This binding describes an I2C bus >>>>>> that is accessed in such a fashion. >>>>>> >>>>>> Signed-off-by: Stephen Warren <swarren@nvidia.com> >>>>>> --- >>>>>> .../bindings/i2c/nvidia,tegra186-bpmp-i2c.txt | 35 >>>>>> ++++++++++++++++++++++ >>>>>> 1 file changed, 35 insertions(+) >>>>>> create mode 100644 >>>>>> Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >>>>>> >>>>>> diff --git >>>>>> a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >>>>>> b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >>>>>> new file mode 100644 >>>>>> index 000000000000..eb9f70723ab7 >>>>>> --- /dev/null >>>>>> +++ >>>>>> b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt >>>>>> @@ -0,0 +1,35 @@ >>>>>> +NVIDIA Tegra186 BPMP I2C controller >>>>>> + >>>>>> +In Tegra186, the BPMP (Boot and Power Management Processor) owns >>>>>> certain >>>>>> HW >>>>>> +devices, such as the I2C controller for the power management I2C bus. >>>>>> Software >>>>>> +running on other CPUs must perform IPC to the BPMP in order to execute >>>>>> +transactions on that I2C bus. This binding describes an I2C bus that >>>>>> is >>>>>> +accessed in such a fashion. >>>>>> + >>>>>> +Required properties: >>>>>> +- compatible: >>>>>> + Array of strings. >>>>>> + One of: >>>>>> + - "nvidia,tegra186-bpmp-i2c". >>>>>> +- address-cells: Address cells for I2C device address. >>>>>> + Single-cell integer. >>>>>> + Must be <1>. >>>>>> +- size-cells: >>>>>> + Single-cell integer. >>>>>> + Must be <0>. >>>>>> +- nvidia,bpmp: >>>>>> + The phandle to the BPMP device. >>>>> >>>>> >>>>> >>>>> Any reason to not make this a sub-node of the BPMP device? >>>> >>>> >>>> >>>> That would be possible too. >>>> >>>> My thought process was along the lines of: The system has an I2C bus, >>>> which >>>> deserves a DT node. That fact seemed more important than the access >>>> mechanism; the fact it's accessed via BPMP rather than direct register >>>> access felt a bit more like an implementation detail. Still, I suppose we >>>> could flip it around and store the node underneath the BPMP if you want; >>>> let >>>> me know. >>> >>> >>> I prefer to utilize the hierarchy unless there are reasons it can't be >>> which doesn't seem to be the case here. >> >> >> OK, how does the following look? If it seems OK, I'll write up the binding >> changes: >> >>> bpmp: bpmp { >>> compatible = "nvidia,tegra186-bpmp"; >> >> ... >>> >>> #clock-cells = <1>; >>> #power-domain-cells = <1>; >>> #reset-cells = <1>; >>> >>> sub-devices { >>> #address-cells = <1>; >>> #size-cells = <0>; >> >> // There actually aren't any registers, so perhaps those two aren't >> // needed. Perhaps those two properties should be dropped? >>> >>> >>> bpmp-i2c { >>> compatible = "nvidia,tegra186-bpmp-i2c"; >>> nvidia,bpmp-bus-id = <5>; > > Given you need this bus number, what about doing "i2c@5" for the node > and using reg property. After all, that is how you "address" the bus. That implies we need a separate address space for every type of sub-device, instead of "sub-devices", we might need "i2c-buses", "spi-buses", "foo-bar-resources", etc., each with n child nodes. >>> #address-cells = <1>; >>> #size-cells = <0>; >>> status = "disabled"; >>> }; >>> }; >>> }; >> >> >> Rationale: >> >> There may be more than 1 I2C bus, so we need a structure that can house n of >> them. >> >> It's plausible the BPMP could support other sub-device-types in the future >> that each need their own node, so it's useful to have a scheme that supports >> arbitrary sub-devices, each using compatible values to define what they are. >> >> We house the sub-devices in an explicit "sub-devices" node, rather than >> directly as children of the top-level bpmp node, so that the BPMP can >> separate any sub-nodes it uses for its own top-level configuration from >> sub-nodes that represent child-/sub-devices. This keeps things clean, and >> allows additions to the bpmp binding without complicating how sub-devices >> are enumerated. This is rather like the recent optinonal i2c-bus child node >> of I2C controllers. >> >> Sound good? > > I'm not crazy about having the extra layer, but I'm not going to > object. I'd argue that i2c@X is unique enough. How would the core BPMP driver know which child nodes to process (and which to ignore) if they were direct children of the main bpmp node? I really don't like the idea of mixing (at the same level) sub-nodes that are pure configuration for the BPMP itself and sub-nodes that describe other devices to instantiate. I suppose the driver could just enumerate every child node and switch based on the name "i2c" vs. "spi" vs "foo", but then the enumeration algorithm is quite BPMP-specific and non-generic:-( -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt new file mode 100644 index 000000000000..eb9f70723ab7 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt @@ -0,0 +1,35 @@ +NVIDIA Tegra186 BPMP I2C controller + +In Tegra186, the BPMP (Boot and Power Management Processor) owns certain HW +devices, such as the I2C controller for the power management I2C bus. Software +running on other CPUs must perform IPC to the BPMP in order to execute +transactions on that I2C bus. This binding describes an I2C bus that is +accessed in such a fashion. + +Required properties: +- compatible: + Array of strings. + One of: + - "nvidia,tegra186-bpmp-i2c". +- address-cells: Address cells for I2C device address. + Single-cell integer. + Must be <1>. +- size-cells: + Single-cell integer. + Must be <0>. +- nvidia,bpmp: + The phandle to the BPMP device. +- nvidia,bpmp-bus-id: + Single-cell integer. + Indicates the I2C bus number this DT node represent, as defined by the + BPMP firmware. + +Example: + + bpmp-i2c { + compatible = "nvidia,tegra186-bpmp-i2c"; + #address-cells = <1>; + #size-cells = <0>; + nvidia,bpmp = <&bpmp>; + nvidia,bpmp-bus-id = <5>; + };