@@ -24,3 +24,8 @@ driver implementation may support the following properties:
unsupported link speed, for instance, trying to do training for
unsupported link speed, etc. Must be '4' for gen4, '3' for gen3, '2'
for gen2, and '1' for gen1. Any other values are invalid.
+- supports-clkreq:
+ If present this property specifies that CLKREQ signal routing exists from
+ root port to downstream device and host bridge drivers can do programming
+ which depends on CLKREQ signal existence. For example, programming root port
+ not to advertise ASPM L1 Sub-States support if there is no CLKREQ signal.
Some host controllers need to know the existence of clkreq signal routing to downstream devices to be able to advertise low power features like ASPM L1 substates. Without clkreq signal routing being present, enabling ASPM L1 sub states might lead to downstream devices falling off the bus. Hence a new device tree property 'supports-clkreq' is added to make such host controllers aware of clkreq signal routing to downstream devices. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> --- Changes since [v1]: * This is a new patch in v2 series Documentation/devicetree/bindings/pci/pci.txt | 5 +++++ 1 file changed, 5 insertions(+)