diff mbox

[7/7] arm64: tegra: Enable XUSB controller on Tegra210 Smaug

Message ID 1470756082-19099-8-git-send-email-jonathanh@nvidia.com
State Accepted
Delegated to: Thierry Reding
Headers show

Commit Message

Jon Hunter Aug. 9, 2016, 3:21 p.m. UTC 
Enable the XUSB controller on Tegra210 Smaug. The Smaug has a USB Type-C
connector with one of the USB2.0 lanes and one of the USB3.0 lanes
populated.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 57 +++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

Comments

Thierry Reding Aug. 24, 2016, 2:57 p.m. UTC | #1 
On Tue, Aug 09, 2016 at 04:21:22PM +0100, Jon Hunter wrote:
> Enable the XUSB controller on Tegra210 Smaug. The Smaug has a USB Type-C
> connector with one of the USB2.0 lanes and one of the USB3.0 lanes
> populated.
> 
> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
> ---
>  arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 57 +++++++++++++++++++++++++++
>  1 file changed, 57 insertions(+)

Applied, thanks.

Thierry
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index 8cdd71f4d9ba..854701cc271d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -1613,6 +1613,63 @@ 
 		status = "okay";
 	};
 
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>,
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>;
+		phy-names = "usb2-0", "usb3-0";
+
+		dvddio-pex-supply = <&avddio_1v05>;
+		hvddio-pex-supply = <&pp1800>;
+		avdd-usb-supply = <&pp3300>;
+		avdd-pll-utmip-supply = <&pp1800>;
+		avdd-pll-uerefe-supply = <&pp1050_avdd>;
+		dvdd-pex-pll-supply = <&avddio_1v05>;
+		hvdd-pex-pll-e-supply = <&pp1800>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		status = "okay";
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-6 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				vbus-supply = <&usbc_vbus>;
+				mode = "otg";
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+		};
+	};
+
 	sdhci@700b0600 {
 		bus-width = <8>;
 		non-removable;