diff mbox series

[v7,1/3] dt-bindings: hwmon: Add adt7475 fan/pwm properties

Message ID 20240722221737.3407958-2-chris.packham@alliedtelesis.co.nz
State Handled Elsewhere
Headers show
Series hwmon: (adt7475) duty cycle configuration | expand

Commit Message

Chris Packham July 22, 2024, 10:17 p.m. UTC 
Add fan child nodes that allow describing the connections for the
ADT7475 to the fans it controls. This also allows setting some
initial values for the pwm duty cycle and frequency.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
---

Notes:
    Changes in v7:
    - None
    Changes in v6:
    - Collect r-by from Rob
    Changes in v5:
    - Use nanoseconds for PWM frequency and duty cycle as per existing
      conventions for PWMs
    - Set flags to 0 in example to match adi,pwm-active-state setting
    Changes in v4:
    - 0 is not a valid frequency value
    Changes in v3:
    - Use the pwm provider/consumer bindings
    Changes in v2:
    - Document 0 as a valid value (leaves hardware as-is)

 .../devicetree/bindings/hwmon/adt7475.yaml    | 35 ++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

Comments

Guenter Roeck July 25, 2024, 2:06 p.m. UTC | #1 
On Tue, Jul 23, 2024 at 10:17:35AM +1200, Chris Packham wrote:
> Add fan child nodes that allow describing the connections for the
> ADT7475 to the fans it controls. This also allows setting some
> initial values for the pwm duty cycle and frequency.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

Applied.

Thanks,
Guenter
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index 051c976ab711..df2b5b889e4d 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -51,6 +51,24 @@  properties:
       enum: [0, 1]
       default: 1
 
+  "#pwm-cells":
+    const: 4
+    description: |
+      Number of cells in a PWM specifier.
+      - 0: The PWM channel
+      - 1: The PWM period in nanoseconds
+           - 90909091 (11 Hz)
+           - 71428571 (14 Hz)
+           - 45454545 (22 Hz)
+           - 34482759 (29 Hz)
+           - 28571429 (35 Hz)
+           - 22727273 (44 Hz)
+           - 17241379 (58 Hz)
+           - 11363636 (88 Hz)
+           - 44444 (22 kHz)
+      - 2: PWM flags 0 or PWM_POLARITY_INVERTED
+      - 3: The default PWM duty cycle in nanoseconds
+
 patternProperties:
   "^adi,bypass-attenuator-in[0-4]$":
     description: |
@@ -81,6 +99,10 @@  patternProperties:
       - smbalert#
       - gpio
 
+  "^fan-[0-9]+$":
+    $ref: fan-common.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
@@ -89,11 +111,12 @@  additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/pwm/pwm.h>
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
-      hwmon@2e {
+      pwm: hwmon@2e {
         compatible = "adi,adt7476";
         reg = <0x2e>;
         adi,bypass-attenuator-in0 = <1>;
@@ -101,5 +124,15 @@  examples:
         adi,pwm-active-state = <1 0 1>;
         adi,pin10-function = "smbalert#";
         adi,pin14-function = "tach4";
+        #pwm-cells = <4>;
+
+        /* PWMs at 22.5 kHz frequency, 50% duty*/
+        fan-0 {
+          pwms = <&pwm 0 44444 0 22222>;
+        };
+
+        fan-1 {
+          pwms = <&pwm 2 44444 0 22222>;
+        };
       };
     };