diff mbox series

[v2,09/17] backlight: ktd253-backlight: Use backlight power constants

Message ID 20240624152033.25016-10-tzimmermann@suse.de
State Handled Elsewhere
Headers show
Series backlight: Introduce power-state constants | expand

Commit Message

Thomas Zimmermann June 24, 2024, 3:20 p.m. UTC 
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
---
 drivers/video/backlight/ktd253-backlight.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/video/backlight/ktd253-backlight.c b/drivers/video/backlight/ktd253-backlight.c
index d7d43454f64a..327b4ee75254 100644
--- a/drivers/video/backlight/ktd253-backlight.c
+++ b/drivers/video/backlight/ktd253-backlight.c
@@ -7,7 +7,6 @@ 
 #include <linux/backlight.h>
 #include <linux/delay.h>
 #include <linux/err.h>
-#include <linux/fb.h>
 #include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -190,10 +189,10 @@  static int ktd253_backlight_probe(struct platform_device *pdev)
 	/* When we just enable the GPIO line we set max brightness */
 	if (brightness) {
 		bl->props.brightness = brightness;
-		bl->props.power = FB_BLANK_UNBLANK;
+		bl->props.power = BACKLIGHT_POWER_ON;
 	} else {
 		bl->props.brightness = 0;
-		bl->props.power = FB_BLANK_POWERDOWN;
+		bl->props.power = BACKLIGHT_POWER_OFF;
 	}
 
 	ktd253->bl = bl;