@@ -18,7 +18,10 @@
#define MC33XS2410_GLB_CTRL_MODE_MASK GENMASK(7, 6)
#define MC33XS2410_GLB_CTRL_NORMAL_MODE BIT(6)
#define MC33XS2410_GLB_CTRL_SAFE_MODE BIT(7)
+#define MC33XS2410_GLB_CTRL_CMOS_LEVEL BIT(0)
#define MC33XS2410_OUT1_4_CTRL 0x02
+#define MC33XS2410_IN_CTRL1 0x03
+#define MC33XS2410_IN_CTRL1_IN_EN(x) BIT(x)
#define MC33XS2410_PWM_CTRL1 0x05
#define MC33XS2410_PWM_CTRL1_POL_INV(x) BIT(x)
#define MC33XS2410_PWM_CTRL3 0x07
@@ -45,6 +48,7 @@
struct mc33xs2410_pwm {
struct pwm_chip chip;
struct spi_device *spi;
+ struct pwm_device *di[4];
struct mutex lock;
};
@@ -154,20 +158,15 @@ static u8 mc33xs2410_pwm_get_freq(const struct pwm_state *state)
return (ret | FIELD_PREP(MC33XS2410_PWM_FREQ_STEP_MASK, step));
}
-static int mc33xs2410_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
- const struct pwm_state *state)
+static int mc33xs2410_pwm_apply_spi(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ const struct pwm_state *state)
{
struct mc33xs2410_pwm *mc33xs2410 = mc33xs2410_pwm_from_chip(chip);
struct spi_device *spi = mc33xs2410->spi;
u8 mask, val;
int ret;
- if (state->period > mc33xs2410_period[STEP_05HZ][MC33XS2410_PERIOD_MAX])
- return -EINVAL;
-
- if (state->period < mc33xs2410_period[STEP_32HZ][MC33XS2410_PERIOD_MIN])
- return -EINVAL;
-
guard(mutex)(&mc33xs2410->lock);
mask = MC33XS2410_PWM_CTRL1_POL_INV(pwm->hwpwm);
val = (state->polarity == PWM_POLARITY_INVERSED) ? mask : 0;
@@ -190,9 +189,38 @@ static int mc33xs2410_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
return mc33xs2410_modify_reg(spi, MC33XS2410_PWM_CTRL3, mask, val);
}
-static int mc33xs2410_pwm_get_state(struct pwm_chip *chip,
- struct pwm_device *pwm,
- struct pwm_state *state)
+static int mc33xs2410_pwm_apply_direct_inputs(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct mc33xs2410_pwm *mc33xs2410 = mc33xs2410_pwm_from_chip(chip);
+ struct pwm_device *di = mc33xs2410->di[pwm->hwpwm];
+
+ guard(mutex)(&mc33xs2410->lock);
+
+ return pwm_apply_state(di, state);
+}
+
+static int mc33xs2410_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct mc33xs2410_pwm *mc33xs2410 = mc33xs2410_pwm_from_chip(chip);
+
+ if (state->period > mc33xs2410_period[STEP_05HZ][MC33XS2410_PERIOD_MAX])
+ return -EINVAL;
+
+ if (state->period < mc33xs2410_period[STEP_32HZ][MC33XS2410_PERIOD_MIN])
+ return -EINVAL;
+
+ if (mc33xs2410->di[pwm->hwpwm])
+ return mc33xs2410_pwm_apply_direct_inputs(chip, pwm, state);
+ else
+ return mc33xs2410_pwm_apply_spi(chip, pwm, state);
+}
+
+static int mc33xs2410_pwm_get_state_spi(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ struct pwm_state *state)
{
struct mc33xs2410_pwm *mc33xs2410 = mc33xs2410_pwm_from_chip(chip);
struct spi_device *spi = mc33xs2410->spi;
@@ -236,6 +264,28 @@ static int mc33xs2410_pwm_get_state(struct pwm_chip *chip,
return 0;
}
+static int mc33xs2410_pwm_get_state_direct_inputs(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct mc33xs2410_pwm *mc33xs2410 = mc33xs2410_pwm_from_chip(chip);
+
+ pwm_get_state(mc33xs2410->di[pwm->hwpwm], state);
+ return 0;
+}
+
+static int mc33xs2410_pwm_get_state(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct mc33xs2410_pwm *mc33xs2410 = mc33xs2410_pwm_from_chip(chip);
+
+ if (mc33xs2410->di[pwm->hwpwm])
+ return mc33xs2410_pwm_get_state_direct_inputs(chip, pwm, state);
+ else
+ return mc33xs2410_pwm_get_state_spi(chip, pwm, state);
+}
+
static const struct pwm_ops mc33xs2410_pwm_ops = {
.apply = mc33xs2410_pwm_apply,
.get_state = mc33xs2410_pwm_get_state,
@@ -257,6 +307,45 @@ static int mc33xs2410_reset(struct device *dev)
return 0;
}
+static int mc33xs2410_direct_inputs_probe(struct mc33xs2410_pwm *mc33xs2410)
+{
+ struct device *dev = &mc33xs2410->spi->dev;
+ u16 di_en = 0;
+ char buf[4];
+ int ret, ch;
+
+ for (ch = 0; ch < 4; ch++) {
+ sprintf(buf, "di%d", ch);
+ mc33xs2410->di[ch] = devm_pwm_get(dev, buf);
+ ret = PTR_ERR_OR_ZERO(mc33xs2410->di[ch]);
+ switch (ret) {
+ case 0:
+ di_en |= MC33XS2410_IN_CTRL1_IN_EN(ch);
+ break;
+ case -ENODATA:
+ mc33xs2410->di[ch] = NULL;
+ break;
+ case -EPROBE_DEFER:
+ return ret;
+ default:
+ dev_err(dev, "Failed to request %s: %d\n", buf, ret);
+ return ret;
+ }
+ }
+
+ if (!di_en)
+ return 0;
+
+ /* CMOS input logic level */
+ ret = mc33xs2410_modify_reg(mc33xs2410->spi, MC33XS2410_GLB_CTRL,
+ MC33XS2410_GLB_CTRL_CMOS_LEVEL,
+ MC33XS2410_GLB_CTRL_CMOS_LEVEL);
+ if (ret < 0)
+ return ret;
+
+ return mc33xs2410_write_reg(mc33xs2410->spi, MC33XS2410_IN_CTRL1, di_en);
+}
+
static int mc33xs2410_probe(struct spi_device *spi)
{
struct mc33xs2410_pwm *mc33xs2410;
@@ -290,6 +379,11 @@ static int mc33xs2410_probe(struct spi_device *spi)
return dev_err_probe(dev, ret,
"Failed to transition to normal mode\n");
+ /* Enable direct inputs */
+ ret = mc33xs2410_direct_inputs_probe(mc33xs2410);
+ if (ret)
+ return ret;
+
ret = devm_pwmchip_add(dev, &mc33xs2410->chip);
if (ret < 0)
return dev_err_probe(dev, ret, "Failed to add pwm chip\n");
Add support for direct inputs, which are used to directly turn-on or turn-off the outputs. Direct inputs have the advantage over the SPI controlled outputs that they aren't limited to the frequency steps. Frequency resolution depends on the input signal, range is still from 0.5Hz to 2.048kHz. Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com> --- drivers/pwm/pwm-mc33xs2410.c | 116 +++++++++++++++++++++++++++++++---- 1 file changed, 105 insertions(+), 11 deletions(-)