[v10,5/5] pwm: Add Renesas RZ/G2L MTU3a PWM driver

Add support for RZ/G2L MTU3a PWM driver. The IP supports
following PWM modes

1) PWM mode{1,2}
2) Reset-synchronized PWM mode
3) Complementary PWM mode{1,2,3}

This patch adds basic pwm mode 1 support for RZ/G2L MTU3a pwm driver
by creating separate logical channels for each IOs.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v9->v10:
 * No change.
v8->v9:
 * Added prescale/duty_cycle variables to struct rz_mtu3_pwm_chip and
   cached this values in rz_mtu3_pwm_config and used this cached values
   in get_state(), if PWM is disabled.
 * Added return code for get_state()
v7->v8:
 * Simplified rz_mtu3_pwm_request by calling rz_mtu3_request_channel()
 * Simplified rz_mtu3_pwm_free by calling rz_mtu3_release_channel()
v6->v7:
 * Added channel specific mutex lock to avoid race between counter
   device and rz_mtu3_pwm_{request,free}
 * Added pm_runtime_resume_and_get in rz_mtu3_pwm_enable()
 * Added pm_runtime_put_sync in rz_mtu3_pwm_disable()
 * Updated rz_mtu3_pwm_config()
 * Updated rz_mtu3_pwm_apply()
v5->v6:
 * Updated commit and Kconfig description
 * Sorted the header
 * Replaced dev_get_drvdata from rz_mtu3_pwm_pm_disable()
 * Replaced SET_RUNTIME_PM_OPS->DEFINE_RUNTIME_DEV_PM_OPS and removed
   __maybe_unused from suspend/resume()
v4->v5:
 * pwm device is instantiated by mtu3a core driver.
v3->v4:
 * There is no resource associated with "rz-mtu3-pwm" compatible
   and moved the code to mfd subsystem as it binds against "rz-mtu".
 * Removed struct platform_driver rz_mtu3_pwm_driver.
v2->v3:
 * No change.
v1->v2:
 * Modelled as a single PWM device handling multiple channles.
 * Used PM framework to manage the clocks.
---
 drivers/pwm/Kconfig       |  11 +
 drivers/pwm/Makefile      |   1 +
 drivers/pwm/pwm-rz-mtu3.c | 486 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 498 insertions(+)
 create mode 100644 drivers/pwm/pwm-rz-mtu3.c

Hi Thierry, Uwe, Geert and PWM folks,

Gentle ping for review. 

Cheers,
Biju

> -----Original Message-----
> From: Biju Das <biju.das.jz@bp.renesas.com>
> Sent: 16 December 2022 20:50
> To: Thierry Reding <thierry.reding@gmail.com>
> Cc: Biju Das <biju.das.jz@bp.renesas.com>; Uwe Kleine-König <u.kleine-
> koenig@pengutronix.de>; linux-pwm@vger.kernel.org; Geert Uytterhoeven
> <geert+renesas@glider.be>; Chris Paterson <Chris.Paterson2@renesas.com>;
> Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>; linux-
> renesas-soc@vger.kernel.org
> Subject: [PATCH v10 5/5] pwm: Add Renesas RZ/G2L MTU3a PWM driver
> 
> Add support for RZ/G2L MTU3a PWM driver. The IP supports following PWM modes
> 
> 1) PWM mode{1,2}
> 2) Reset-synchronized PWM mode
> 3) Complementary PWM mode{1,2,3}
> 
> This patch adds basic pwm mode 1 support for RZ/G2L MTU3a pwm driver by
> creating separate logical channels for each IOs.
> 
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> v9->v10:
>  * No change.
> v8->v9:
>  * Added prescale/duty_cycle variables to struct rz_mtu3_pwm_chip and
>    cached this values in rz_mtu3_pwm_config and used this cached values
>    in get_state(), if PWM is disabled.
>  * Added return code for get_state()
> v7->v8:
>  * Simplified rz_mtu3_pwm_request by calling rz_mtu3_request_channel()
>  * Simplified rz_mtu3_pwm_free by calling rz_mtu3_release_channel()
> v6->v7:
>  * Added channel specific mutex lock to avoid race between counter
>    device and rz_mtu3_pwm_{request,free}
>  * Added pm_runtime_resume_and_get in rz_mtu3_pwm_enable()
>  * Added pm_runtime_put_sync in rz_mtu3_pwm_disable()
>  * Updated rz_mtu3_pwm_config()
>  * Updated rz_mtu3_pwm_apply()
> v5->v6:
>  * Updated commit and Kconfig description
>  * Sorted the header
>  * Replaced dev_get_drvdata from rz_mtu3_pwm_pm_disable()
>  * Replaced SET_RUNTIME_PM_OPS->DEFINE_RUNTIME_DEV_PM_OPS and removed
>    __maybe_unused from suspend/resume()
> v4->v5:
>  * pwm device is instantiated by mtu3a core driver.
> v3->v4:
>  * There is no resource associated with "rz-mtu3-pwm" compatible
>    and moved the code to mfd subsystem as it binds against "rz-mtu".
>  * Removed struct platform_driver rz_mtu3_pwm_driver.
> v2->v3:
>  * No change.
> v1->v2:
>  * Modelled as a single PWM device handling multiple channles.
>  * Used PM framework to manage the clocks.
> ---
>  drivers/pwm/Kconfig       |  11 +
>  drivers/pwm/Makefile      |   1 +
>  drivers/pwm/pwm-rz-mtu3.c | 486 ++++++++++++++++++++++++++++++++++++++
>  3 files changed, 498 insertions(+)
>  create mode 100644 drivers/pwm/pwm-rz-mtu3.c
> 
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index
> dae023d783a2..ccc0299fd0dd 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -481,6 +481,17 @@ config PWM_ROCKCHIP
>  	  Generic PWM framework driver for the PWM controller found on
>  	  Rockchip SoCs.
> 
> +config PWM_RZ_MTU3
> +	tristate "Renesas RZ/G2L MTU3a PWM Timer support"
> +	depends on RZ_MTU3 || COMPILE_TEST
> +	depends on HAS_IOMEM
> +	help
> +	  This driver exposes the MTU3a PWM Timer controller found in Renesas
> +	  RZ/G2L like chips through the PWM API.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called pwm-rz-mtu3.
> +
>  config PWM_SAMSUNG
>  	tristate "Samsung PWM support"
>  	depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index
> 7bf1a29f02b8..b85fc9fba326 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -44,6 +44,7 @@ obj-$(CONFIG_PWM_RASPBERRYPI_POE)	+= pwm-raspberrypi-
> poe.o
>  obj-$(CONFIG_PWM_RCAR)		+= pwm-rcar.o
>  obj-$(CONFIG_PWM_RENESAS_TPU)	+= pwm-renesas-tpu.o
>  obj-$(CONFIG_PWM_ROCKCHIP)	+= pwm-rockchip.o
> +obj-$(CONFIG_PWM_RZ_MTU3)	+= pwm-rz-mtu3.o
>  obj-$(CONFIG_PWM_SAMSUNG)	+= pwm-samsung.o
>  obj-$(CONFIG_PWM_SIFIVE)	+= pwm-sifive.o
>  obj-$(CONFIG_PWM_SL28CPLD)	+= pwm-sl28cpld.o
> diff --git a/drivers/pwm/pwm-rz-mtu3.c b/drivers/pwm/pwm-rz-mtu3.c new file
> mode 100644 index 000000000000..fddff20c98a7
> --- /dev/null
> +++ b/drivers/pwm/pwm-rz-mtu3.c
> @@ -0,0 +1,486 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Renesas RZ/G2L MTU3a PWM Timer driver
> + *
> + * Copyright (C) 2022 Renesas Electronics Corporation
> + *
> + * Hardware manual for this IP can be found here
> + *
> +https://www.renesas.com/eu/en/document/mah/rzg2l-group-rzg2lc-group-use
> +rs-manual-hardware-0?language=en
> + *
> + * Limitations:
> + * - When PWM is disabled, the output is driven to Hi-Z.
> + * - While the hardware supports both polarities, the driver (for now)
> + *   only handles normal polarity.
> + * - While the hardware supports pwm mode{1,2}, reset-synchronized pwm and
> + *   complementary pwm modes, the driver (for now) only handles pwm mode1.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/limits.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/pwm.h>
> +#include <linux/time.h>
> +
> +#include <clocksource/rz-mtu3.h>
> +
> +#define RZ_MTU3_TMDR1_MD_NORMAL		(0)
> +#define RZ_MTU3_TMDR1_MD_PWM_MODE_1	(2)
> +
> +#define RZ_MTU3_TIOR_OC_RETAIN		(0)
> +#define RZ_MTU3_TIOR_OC_0_H_COMP_MATCH	(2)
> +#define RZ_MTU3_TIOR_OC_1_TOGGLE	(7)
> +#define RZ_MTU3_TIOR_OC_IOA		GENMASK(3, 0)
> +
> +#define RZ_MTU3_TCR_CCLR_TGRC		(5 << 5)
> +#define RZ_MTU3_TCR_CKEG_RISING		(0 << 3)
> +
> +#define RZ_MTU3_TCR_TPCS		GENMASK(2, 0)
> +
> +#define RZ_MTU3_MAX_PWM_MODE1_CHANNELS	(12)
> +
> +#define RZ_MTU3_MAX_HW_PWM_CHANNELS	(7)
> +
> +static const u8 rz_mtu3_pwm_mode1_num_ios[] = { 2, 1, 1, 2, 2, 2, 2 };
> +
> +/**
> + * struct rz_mtu3_pwm_chip - MTU3 pwm private data
> + *
> + * @chip: MTU3 pwm chip data
> + * @clk: MTU3 module clock
> + * @lock: Lock to prevent concurrent access for usage count
> + * @rate: MTU3 clock rate
> + * @user_count: MTU3 usage count
> + * @rz_mtu3_channel: HW channels for the PWM  */
> +
> +struct rz_mtu3_pwm_chip {
> +	struct pwm_chip chip;
> +	struct clk *clk;
> +	struct mutex lock;
> +	unsigned long rate;
> +	u32 user_count[RZ_MTU3_MAX_HW_PWM_CHANNELS];
> +	struct rz_mtu3_channel *ch[RZ_MTU3_MAX_HW_PWM_CHANNELS];
> +
> +	/*
> +	 * The driver cannot read the current duty cycle/prescale from the
> +	 * hardware if the hardware is disabled. Cache the last programmed
> +	 * duty cycle/prescale value to return in that case.
> +	 */
> +	u8 prescale[RZ_MTU3_MAX_HW_PWM_CHANNELS];
> +	unsigned int duty_cycle[RZ_MTU3_MAX_PWM_MODE1_CHANNELS];
> +};
> +
> +static inline struct rz_mtu3_pwm_chip *to_rz_mtu3_pwm_chip(struct
> +pwm_chip *chip) {
> +	return container_of(chip, struct rz_mtu3_pwm_chip, chip); }
> +
> +static u8 rz_mtu3_pwm_calculate_prescale(struct rz_mtu3_pwm_chip *rz_mtu3,
> +					 u64 period_cycles)
> +{
> +	u32 prescaled_period_cycles;
> +	u8 prescale;
> +
> +	prescaled_period_cycles = period_cycles >> 16;
> +	if (prescaled_period_cycles >= 16)
> +		prescale = 3;
> +	else
> +		prescale = (fls(prescaled_period_cycles) + 1) / 2;
> +
> +	return prescale;
> +}
> +
> +static struct rz_mtu3_channel *
> +rz_mtu3_get_hw_channel(struct rz_mtu3_pwm_chip *rz_mtu3_pwm, u32
> +channel) {
> +	unsigned int i, ch_index = 0;
> +
> +	for (i = 0; i < ARRAY_SIZE(rz_mtu3_pwm_mode1_num_ios); i++) {
> +		ch_index += rz_mtu3_pwm_mode1_num_ios[i];
> +
> +		if (ch_index > channel)
> +			break;
> +	}
> +
> +	return rz_mtu3_pwm->ch[i];
> +}
> +
> +static u32 rz_mtu3_get_hw_channel_index(struct rz_mtu3_pwm_chip
> *rz_mtu3_pwm,
> +					struct rz_mtu3_channel *ch)
> +{
> +	u32 i;
> +
> +	for (i = 0; i < ARRAY_SIZE(rz_mtu3_pwm_mode1_num_ios); i++) {
> +		if (ch == rz_mtu3_pwm->ch[i])
> +			break;
> +	}
> +
> +	return i;
> +}
> +
> +static bool rz_mtu3_pwm_is_second_channel(u32 ch_index, u32 hwpwm) {
> +	u32 i, pwm_ch_index = 0;
> +
> +	for (i = 0; i < ch_index; i++)
> +		pwm_ch_index += rz_mtu3_pwm_mode1_num_ios[i];
> +
> +	return pwm_ch_index != hwpwm;
> +}
> +
> +static bool rz_mtu3_pwm_is_ch_enabled(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
> +				      u32 hwpwm)
> +{
> +	struct rz_mtu3_channel *ch;
> +	bool is_channel_en;
> +	u32 ch_index;
> +	u8 val;
> +
> +	ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, hwpwm);
> +	ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
> +	is_channel_en = rz_mtu3_is_enabled(ch);
> +
> +	if (rz_mtu3_pwm_is_second_channel(ch_index, hwpwm))
> +		val = rz_mtu3_8bit_ch_read(ch, RZ_MTU3_TIORL);
> +	else
> +		val = rz_mtu3_8bit_ch_read(ch, RZ_MTU3_TIORH);
> +
> +	return (is_channel_en && (val & RZ_MTU3_TIOR_OC_IOA)); }
> +
> +static int rz_mtu3_pwm_request(struct pwm_chip *chip, struct pwm_device
> +*pwm) {
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
> +	struct rz_mtu3_channel *ch;
> +	u32 ch_index;
> +
> +	ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
> +	ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
> +	if (!rz_mtu3_pwm->user_count[ch_index] &&
> !rz_mtu3_request_channel(ch))
> +		return -EBUSY;
> +
> +	mutex_lock(&rz_mtu3_pwm->lock);
> +	rz_mtu3_pwm->user_count[ch_index]++;
> +	mutex_unlock(&rz_mtu3_pwm->lock);
> +
> +	return 0;
> +}
> +
> +static void rz_mtu3_pwm_free(struct pwm_chip *chip, struct pwm_device
> +*pwm) {
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
> +	struct rz_mtu3_channel *ch;
> +	u32 ch_index;
> +
> +	ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
> +	ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
> +
> +	mutex_lock(&rz_mtu3_pwm->lock);
> +	rz_mtu3_pwm->user_count[ch_index]--;
> +	mutex_unlock(&rz_mtu3_pwm->lock);
> +
> +	if (!rz_mtu3_pwm->user_count[ch_index])
> +		rz_mtu3_release_channel(ch);
> +}
> +
> +static int rz_mtu3_pwm_enable(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
> +			      struct pwm_device *pwm)
> +{
> +	struct rz_mtu3_channel *ch;
> +	u32 ch_index;
> +	u8 val;
> +	int rc;
> +
> +	rc = pm_runtime_resume_and_get(rz_mtu3_pwm->chip.dev);
> +	if (rc)
> +		return rc;
> +
> +	ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
> +	ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
> +	val = (RZ_MTU3_TIOR_OC_1_TOGGLE << 4) |
> +RZ_MTU3_TIOR_OC_0_H_COMP_MATCH;
> +
> +	rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TMDR1, RZ_MTU3_TMDR1_MD_PWM_MODE_1);
> +	if (rz_mtu3_pwm_is_second_channel(ch_index, pwm->hwpwm))
> +		rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TIORL, val);
> +	else
> +		rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TIORH, val);
> +
> +	if (rz_mtu3_pwm->user_count[ch_index] <= 1)
> +		rz_mtu3_enable(ch);
> +
> +	return 0;
> +}
> +
> +static void rz_mtu3_pwm_disable(struct rz_mtu3_pwm_chip *rz_mtu3_pwm,
> +				struct pwm_device *pwm)
> +{
> +	struct rz_mtu3_channel *ch;
> +	u32 ch_index;
> +
> +	ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
> +	ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
> +
> +	/* Return to normal mode and disable output pins of MTU3 channel */
> +	if (rz_mtu3_pwm->user_count[ch_index] <= 1)
> +		rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TMDR1,
> RZ_MTU3_TMDR1_MD_NORMAL);
> +
> +	if (rz_mtu3_pwm_is_second_channel(ch_index, pwm->hwpwm))
> +		rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TIORL,
> RZ_MTU3_TIOR_OC_RETAIN);
> +	else
> +		rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TIORH,
> RZ_MTU3_TIOR_OC_RETAIN);
> +
> +	if (rz_mtu3_pwm->user_count[ch_index] <= 1)
> +		rz_mtu3_disable(ch);
> +
> +	pm_runtime_put_sync(rz_mtu3_pwm->chip.dev);
> +}
> +
> +static int rz_mtu3_pwm_config(struct pwm_chip *chip, struct pwm_device
> *pwm,
> +			      const struct pwm_state *state) {
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
> +	struct rz_mtu3_channel *ch;
> +	unsigned long pv, dc;
> +	u64 period_cycles;
> +	u64 duty_cycles;
> +	u32 ch_index;
> +	u8 prescale;
> +	int err;
> +	u8 val;
> +
> +	/*
> +	 * Refuse clk rates > 1 GHz to prevent overflowing the following
> +	 * calculation.
> +	 */
> +	if (rz_mtu3_pwm->rate > NSEC_PER_SEC)
> +		return -EINVAL;
> +
> +	ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
> +	ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
> +	period_cycles = mul_u64_u32_div(state->period, rz_mtu3_pwm->rate,
> +					NSEC_PER_SEC);
> +	prescale = rz_mtu3_pwm_calculate_prescale(rz_mtu3_pwm, period_cycles);
> +
> +	if (period_cycles >> (2 * prescale) <= U16_MAX)
> +		pv = period_cycles >> (2 * prescale);
> +	else
> +		pv = U16_MAX;
> +
> +	duty_cycles = mul_u64_u32_div(state->duty_cycle, rz_mtu3_pwm->rate,
> +				      NSEC_PER_SEC);
> +	if (duty_cycles >> (2 * prescale) <= U16_MAX)
> +		dc = duty_cycles >> (2 * prescale);
> +	else
> +		dc = U16_MAX;
> +
> +	/*
> +	 * Store the duty cycle/prescale for future reference in cases where
> the
> +	 * corresponding registers can't be read (i.e. when the PWM is
> disabled).
> +	 */
> +	rz_mtu3_pwm->prescale[ch_index] = prescale;
> +	rz_mtu3_pwm->duty_cycle[pwm->hwpwm] = dc;
> +
> +	/*
> +	 * If the PWM channel is disabled, make sure to turn on the clock
> +	 * before writing the register.
> +	 */
> +	if (!pwm_is_enabled(pwm)) {
> +		err = pm_runtime_resume_and_get(chip->dev);
> +		if (err)
> +			return err;
> +	}
> +
> +	val = RZ_MTU3_TCR_CKEG_RISING | prescale;
> +	if (rz_mtu3_pwm_is_second_channel(ch_index, pwm->hwpwm)) {
> +		rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TCR,
> +				      RZ_MTU3_TCR_CCLR_TGRC | val);
> +		rz_mtu3_16bit_ch_write(ch, RZ_MTU3_TGRD, dc);
> +		rz_mtu3_16bit_ch_write(ch, RZ_MTU3_TGRC, pv);
> +	} else {
> +		rz_mtu3_8bit_ch_write(ch, RZ_MTU3_TCR,
> +				      RZ_MTU3_TCR_CCLR_TGRA | val);
> +		rz_mtu3_16bit_ch_write(ch, RZ_MTU3_TGRB, dc);
> +		rz_mtu3_16bit_ch_write(ch, RZ_MTU3_TGRA, pv);
> +	}
> +
> +	/* If the PWM is not enabled, turn the clock off again to save power.
> */
> +	if (!pwm_is_enabled(pwm))
> +		pm_runtime_put(chip->dev);
> +
> +	return 0;
> +}
> +
> +static int rz_mtu3_pwm_get_state(struct pwm_chip *chip, struct pwm_device
> *pwm,
> +				 struct pwm_state *state)
> +{
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
> +	struct rz_mtu3_channel *ch;
> +	u8 prescale, val;
> +	u32 ch_index;
> +	u16 dc, pv;
> +	u64 tmp;
> +
> +	ch = rz_mtu3_get_hw_channel(rz_mtu3_pwm, pwm->hwpwm);
> +	ch_index = rz_mtu3_get_hw_channel_index(rz_mtu3_pwm, ch);
> +	pm_runtime_get_sync(chip->dev);
> +	state->enabled = rz_mtu3_pwm_is_ch_enabled(rz_mtu3_pwm, pwm->hwpwm);
> +	if (state->enabled) {
> +		val = rz_mtu3_8bit_ch_read(ch, RZ_MTU3_TCR);
> +		prescale = FIELD_GET(RZ_MTU3_TCR_TPCS, val);
> +
> +		if (rz_mtu3_pwm_is_second_channel(ch_index, pwm->hwpwm)) {
> +			dc = rz_mtu3_16bit_ch_read(ch, RZ_MTU3_TGRD);
> +			pv = rz_mtu3_16bit_ch_read(ch, RZ_MTU3_TGRC);
> +		} else {
> +			dc = rz_mtu3_16bit_ch_read(ch, RZ_MTU3_TGRB);
> +			pv = rz_mtu3_16bit_ch_read(ch, RZ_MTU3_TGRA);
> +		}
> +
> +		tmp = NSEC_PER_SEC * (u64)pv << (2 * prescale);
> +		state->period = DIV_ROUND_UP_ULL(tmp, rz_mtu3_pwm->rate);
> +	} else {
> +		/* If the PWM is disabled, use the cached value. */
> +		prescale = rz_mtu3_pwm->prescale[ch_index];
> +		dc = rz_mtu3_pwm->duty_cycle[pwm->hwpwm];
> +	}
> +
> +	tmp = NSEC_PER_SEC * (u64)dc << (2 * prescale);
> +	state->duty_cycle = DIV_ROUND_UP_ULL(tmp, rz_mtu3_pwm->rate);
> +	state->polarity = PWM_POLARITY_NORMAL;
> +	pm_runtime_put(chip->dev);
> +
> +	return 0;
> +}
> +
> +static int rz_mtu3_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> +			     const struct pwm_state *state)
> +{
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = to_rz_mtu3_pwm_chip(chip);
> +	bool enabled = pwm->state.enabled;
> +	int ret;
> +
> +	if (state->polarity != PWM_POLARITY_NORMAL)
> +		return -EINVAL;
> +
> +	if (!state->enabled) {
> +		if (enabled)
> +			rz_mtu3_pwm_disable(rz_mtu3_pwm, pwm);
> +
> +		return 0;
> +	}
> +
> +	ret = rz_mtu3_pwm_config(chip, pwm, state);
> +	if (ret)
> +		return ret;
> +
> +	if (!enabled)
> +		ret = rz_mtu3_pwm_enable(rz_mtu3_pwm, pwm);
> +
> +	return ret;
> +}
> +
> +static const struct pwm_ops rz_mtu3_pwm_ops = {
> +	.request = rz_mtu3_pwm_request,
> +	.free = rz_mtu3_pwm_free,
> +	.get_state = rz_mtu3_pwm_get_state,
> +	.apply = rz_mtu3_pwm_apply,
> +	.owner = THIS_MODULE,
> +};
> +
> +static int rz_mtu3_pwm_pm_runtime_suspend(struct device *dev) {
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = dev_get_drvdata(dev);
> +
> +	clk_disable_unprepare(rz_mtu3_pwm->clk);
> +
> +	return 0;
> +}
> +
> +static int rz_mtu3_pwm_pm_runtime_resume(struct device *dev) {
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = dev_get_drvdata(dev);
> +
> +	clk_prepare_enable(rz_mtu3_pwm->clk);
> +
> +	return 0;
> +}
> +
> +static DEFINE_RUNTIME_DEV_PM_OPS(rz_mtu3_pwm_pm_ops,
> +				 rz_mtu3_pwm_pm_runtime_suspend,
> +				 rz_mtu3_pwm_pm_runtime_resume, NULL);
> +
> +static void rz_mtu3_pwm_pm_disable(void *data) {
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm = data;
> +
> +	pm_runtime_disable(rz_mtu3_pwm->chip.dev);
> +	pm_runtime_set_suspended(rz_mtu3_pwm->chip.dev);
> +}
> +
> +static int rz_mtu3_pwm_probe(struct platform_device *pdev) {
> +	struct rz_mtu3 *ddata = dev_get_drvdata(pdev->dev.parent);
> +	struct rz_mtu3_pwm_chip *rz_mtu3_pwm;
> +	struct device *dev = &pdev->dev;
> +	int num_pwm_hw_ch = 0;
> +	unsigned int i;
> +	int ret;
> +
> +	rz_mtu3_pwm = devm_kzalloc(&pdev->dev, sizeof(*rz_mtu3_pwm),
> GFP_KERNEL);
> +	if (!rz_mtu3_pwm)
> +		return -ENOMEM;
> +
> +	rz_mtu3_pwm->clk = ddata->clk;
> +	rz_mtu3_pwm->rate = clk_get_rate(rz_mtu3_pwm->clk);
> +	for (i = 0; i < RZ_MTU_NUM_CHANNELS; i++) {
> +		if (i == RZ_MTU5 || i == RZ_MTU8)
> +			continue;
> +
> +		rz_mtu3_pwm->ch[num_pwm_hw_ch] = &ddata->channels[i];
> +		rz_mtu3_pwm->ch[num_pwm_hw_ch]->dev = dev;
> +		num_pwm_hw_ch++;
> +	}
> +
> +	mutex_init(&rz_mtu3_pwm->lock);
> +	platform_set_drvdata(pdev, rz_mtu3_pwm);
> +	clk_prepare_enable(rz_mtu3_pwm->clk);
> +	pm_runtime_set_active(&pdev->dev);
> +	pm_runtime_enable(&pdev->dev);
> +	ret = devm_add_action_or_reset(&pdev->dev,
> +				       rz_mtu3_pwm_pm_disable,
> +				       rz_mtu3_pwm);
> +	if (ret < 0)
> +		goto disable_clock;
> +
> +	rz_mtu3_pwm->chip.dev = &pdev->dev;
> +	rz_mtu3_pwm->chip.ops = &rz_mtu3_pwm_ops;
> +	rz_mtu3_pwm->chip.npwm = RZ_MTU3_MAX_PWM_MODE1_CHANNELS;
> +	ret = devm_pwmchip_add(&pdev->dev, &rz_mtu3_pwm->chip);
> +	if (ret) {
> +		dev_err_probe(&pdev->dev, ret, "failed to add PWM chip\n");
> +		goto disable_clock;
> +	}
> +
> +	return 0;
> +
> +disable_clock:
> +	clk_disable_unprepare(rz_mtu3_pwm->clk);
> +	return ret;
> +}
> +
> +static struct platform_driver rz_mtu3_pwm_driver = {
> +	.driver = {
> +		.name = "pwm-rz-mtu3",
> +		.pm = pm_ptr(&rz_mtu3_pwm_pm_ops),
> +	},
> +	.probe = rz_mtu3_pwm_probe,
> +};
> +module_platform_driver(rz_mtu3_pwm_driver);
> +
> +MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
> +MODULE_ALIAS("platform:pwm-rz-mtu3");
> +MODULE_DESCRIPTION("Renesas RZ/G2L MTU3a PWM Timer Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1