From patchwork Wed Oct 5 13:55:16 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Biju Das X-Patchwork-Id: 1686348 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-pwm-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by legolas.ozlabs.org (Postfix) with ESMTP id 4MjGLM0Mtdz23jM for ; Thu, 6 Oct 2022 00:55:39 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229831AbiJENzg (ORCPT ); Wed, 5 Oct 2022 09:55:36 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:45526 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229844AbiJENzc (ORCPT ); Wed, 5 Oct 2022 09:55:32 -0400 Received: from relmlie5.idc.renesas.com (relmlor1.renesas.com [210.160.252.171]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id B56546527E; Wed, 5 Oct 2022 06:55:30 -0700 (PDT) X-IronPort-AV: E=Sophos;i="5.95,159,1661785200"; d="scan'208";a="135457108" Received: from unknown (HELO relmlir5.idc.renesas.com) ([10.200.68.151]) by relmlie5.idc.renesas.com with ESMTP; 05 Oct 2022 22:55:30 +0900 Received: from localhost.localdomain (unknown [10.226.92.36]) by relmlir5.idc.renesas.com (Postfix) with ESMTP id D6F0D4006190; Wed, 5 Oct 2022 22:55:25 +0900 (JST) From: Biju Das To: Rob Herring , Krzysztof Kozlowski , William Breathitt Gray , Thierry Reding Cc: Biju Das , Lee Jones , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , devicetree@vger.kernel.org, linux-pwm@vger.kernel.org, Geert Uytterhoeven , Chris Paterson , Biju Das , Prabhakar Mahadev Lad , linux-renesas-soc@vger.kernel.org Subject: [PATCH 1/3] dt-bindings: mfd: Document RZ/G2L MTU3a bindings Date: Wed, 5 Oct 2022 14:55:16 +0100 Message-Id: <20221005135518.876913-2-biju.das.jz@bp.renesas.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221005135518.876913-1-biju.das.jz@bp.renesas.com> References: <20221005135518.876913-1-biju.das.jz@bp.renesas.com> MIME-Version: 1.0 X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00,SPF_HELO_NONE, SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-pwm@vger.kernel.org The RZ/G2L multi-function timer pulse unit 3 (MTU3a) is embedded in the Renesas RZ/G2L family SoC's. It consists of eight 16-bit timer channels and one 32-bit timer channel. It supports the following functions - Counter - Timer - PWM Signed-off-by: Biju Das --- RFC->v1: * Modelled counter and pwm as a single device that handles multiple channels. * Moved counter and pwm bindings to respective subsystems * Dropped 'bindings' from MFD binding title. * Updated the example * Changed the compatible names. --- .../counter/renesas,rz-mtu3-counter.yaml | 30 ++ .../bindings/mfd/renesas,rz-mtu3.yaml | 290 ++++++++++++++++++ .../bindings/pwm/renesas,rz-mtu3-pwm.yaml | 50 +++ 3 files changed, 370 insertions(+) create mode 100644 Documentation/devicetree/bindings/counter/renesas,rz-mtu3-counter.yaml create mode 100644 Documentation/devicetree/bindings/mfd/renesas,rz-mtu3.yaml create mode 100644 Documentation/devicetree/bindings/pwm/renesas,rz-mtu3-pwm.yaml diff --git a/Documentation/devicetree/bindings/counter/renesas,rz-mtu3-counter.yaml b/Documentation/devicetree/bindings/counter/renesas,rz-mtu3-counter.yaml new file mode 100644 index 000000000000..c8b86ef254b6 --- /dev/null +++ b/Documentation/devicetree/bindings/counter/renesas,rz-mtu3-counter.yaml @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/counter/renesas,rz-mtu3-counter.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L MTU3a Counter Module + +maintainers: + - Biju Das + +description: | + This module is part of the rz-mtu3 multi-function device. For more + details see ../mfd/renesas,rz-mtu3.yaml. + + There are two phase counting modes: 16-bit phase counting mode in which MTU1 + and MTU2 operate independently, and cascade connection 32-bit phase counting + mode in which MTU1 and MTU2 are cascaded. + + In phase counting mode, the phase difference between two external input clocks + is detected and the corresponding TCNT is incremented or decremented. + +properties: + compatible: + const: renesas,rz-mtu3-counter + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/renesas,rz-mtu3.yaml b/Documentation/devicetree/bindings/mfd/renesas,rz-mtu3.yaml new file mode 100644 index 000000000000..0413d22704c9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/renesas,rz-mtu3.yaml @@ -0,0 +1,290 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/renesas,rz-mtu3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L Multi-Function Timer Pulse Unit 3 (MTU3a) + +maintainers: + - Biju Das + +description: | + This hardware block pconsisting of eight 16-bit timer channels and one + 32- bit timer channel. It supports the following specifications: + - Pulse input/output: 28 lines max. + - Pulse input 3 lines + - Count clock 11 clocks for each channel (14 clocks for MTU0, 12 clocks + for MTU2, and 10 clocks for MTU5, four clocks for MTU1-MTU2 combination + (when LWA = 1)) + - Operating frequency Up to 100 MHz + - Available operations [MTU0 to MTU4, MTU6, MTU7, and MTU8] + - Waveform output on compare match + - Input capture function (noise filter setting available) + - Counter-clearing operation + - Simultaneous writing to multiple timer counters (TCNT) + (excluding MTU8). + - Simultaneous clearing on compare match or input capture + (excluding MTU8). + - Simultaneous input and output to registers in synchronization with + counter operations (excluding MTU8). + - Up to 12-phase PWM output in combination with synchronous operation + (excluding MTU8) + - [MTU0 MTU3, MTU4, MTU6, MTU7, and MTU8] + - Buffer operation specifiable + - [MTU1, MTU2] + - Phase counting mode can be specified independently + - 32-bit phase counting mode can be specified for interlocked operation + of MTU1 and MTU2 (when TMDR3.LWA = 1) + - Cascade connection operation available + - [MTU3, MTU4, MTU6, and MTU7] + - Through interlocked operation of MTU3/4 and MTU6/7, the positive and + negative signals in six phases (12 phases in total) can be output in + complementary PWM and reset-synchronized PWM operation. + - In complementary PWM mode, values can be transferred from buffer + registers to temporary registers at crests and troughs of the timer- + counter values or when the buffer registers (TGRD registers in MTU4 + and MTU7) are written to. + - Double-buffering selectable in complementary PWM mode. + - [MTU3 and MTU4] + - Through interlocking with MTU0, a mode for driving AC synchronous + motors (brushless DC motors) by using complementary PWM output and + reset-synchronized PWM output is settable and allows the selection + of two types of waveform output (chopping or level). + - [MTU5] + - Capable of operation as a dead-time compensation counter. + - [MTU0/MTU5, MTU1, MTU2, and MTU8] + - 32-bit phase counting mode specifiable by combining MTU1 and MTU2 and + through interlocked operation with MTU0/MTU5 and MTU8. + - Interrupt-skipping function + - In complementary PWM mode, interrupts on crests and troughs of counter + values and triggers to start conversion by the A/D converter can be + skipped. + - Interrupt sources: 43 sources. + - Buffer operation: + - Automatic transfer of register data (transfer from the buffer + register to the timer register). + - Trigger generation + - A/D converter start triggers can be generated + - A/D converter start request delaying function enables A/D converter + to be started with any desired timing and to be synchronized with + PWM output. + - Low power consumption function + - The MTU3a can be placed in the module-stop state. + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-mtu3 # RZ/G2{L,LC} + - renesas,r9a07g054-mtu3 # RZ/V2L + - const: renesas,rz-mtu3 + + reg: + maxItems: 1 + + interrupts: + items: + - description: MTU0.TGRA input capture/compare match + - description: MTU0.TGRB input capture/compare match + - description: MTU0.TGRC input capture/compare match + - description: MTU0.TGRD input capture/compare match + - description: MTU0.TCNT overflow + - description: MTU0.TGRE compare match + - description: MTU0.TGRF compare match + - description: MTU1.TGRA input capture/compare match + - description: MTU1.TGRB input capture/compare match + - description: MTU1.TCNT overflow + - description: MTU1.TCNT underflow + - description: MTU2.TGRA input capture/compare match + - description: MTU2.TGRB input capture/compare match + - description: MTU2.TCNT overflow + - description: MTU2.TCNT underflow + - description: MTU3.TGRA input capture/compare match + - description: MTU3.TGRB input capture/compare match + - description: MTU3.TGRC input capture/compare match + - description: MTU3.TGRD input capture/compare match + - description: MTU3.TCNT overflow + - description: MTU4.TGRA input capture/compare match + - description: MTU4.TGRB input capture/compare match + - description: MTU4.TGRC input capture/compare match + - description: MTU4.TGRD input capture/compare match + - description: MTU4.TCNT overflow/underflow + - description: MTU5.TGRU input capture/compare match + - description: MTU5.TGRV input capture/compare match + - description: MTU5.TGRW input capture/compare match + - description: MTU6.TGRA input capture/compare match + - description: MTU6.TGRB input capture/compare match + - description: MTU6.TGRC input capture/compare match + - description: MTU6.TGRD input capture/compare match + - description: MTU6.TCNT overflow + - description: MTU7.TGRA input capture/compare match + - description: MTU7.TGRB input capture/compare match + - description: MTU7.TGRC input capture/compare match + - description: MTU7.TGRD input capture/compare match + - description: MTU7.TCNT overflow/underflow + - description: MTU8.TGRA input capture/compare match + - description: MTU8.TGRB input capture/compare match + - description: MTU8.TGRC input capture/compare match + - description: MTU8.TGRD input capture/compare match + - description: MTU8.TCNT overflow + - description: MTU8.TCNT underflow + + interrupt-names: + items: + - const: tgia0 + - const: tgib0 + - const: tgic0 + - const: tgid0 + - const: tgiv0 + - const: tgie0 + - const: tgif0 + - const: tgia1 + - const: tgib1 + - const: tgiv1 + - const: tgiu1 + - const: tgia2 + - const: tgib2 + - const: tgiv2 + - const: tgiu2 + - const: tgia3 + - const: tgib3 + - const: tgic3 + - const: tgid3 + - const: tgiv3 + - const: tgia4 + - const: tgib4 + - const: tgic4 + - const: tgid4 + - const: tgiv4 + - const: tgiu5 + - const: tgiv5 + - const: tgiw5 + - const: tgia6 + - const: tgib6 + - const: tgic6 + - const: tgid6 + - const: tgiv6 + - const: tgia7 + - const: tgib7 + - const: tgic7 + - const: tgid7 + - const: tgiv7 + - const: tgia8 + - const: tgib8 + - const: tgic8 + - const: tgid8 + - const: tgiv8 + - const: tgiu8 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "counter": + $ref: ../counter/renesas,rz-mtu3-counter.yaml + + "pwm": + $ref: ../pwm/renesas,rz-mtu3-pwm.yaml + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - power-domains + - resets + +additionalProperties: false + +examples: + - | + #include + #include + + mtu3: timer@10001200 { + compatible = "renesas,r9a07g044-mtu3", "renesas,rz-mtu3"; + reg = <0x10001200 0xb00>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tgiv0", "tgie0", + "tgif0", + "tgia1", "tgib1", "tgiv1", "tgiu1", + "tgia2", "tgib2", "tgiv2", "tgiu2", + "tgia3", "tgib3", "tgic3", "tgid3", "tgiv3", + "tgia4", "tgib4", "tgic4", "tgid4", "tgiv4", + "tgiu5", "tgiv5", "tgiw5", + "tgia6", "tgib6", "tgic6", "tgid6", "tgiv6", + "tgia7", "tgib7", "tgic7", "tgid7", "tgiv7", + "tgia8", "tgib8", "tgic8", "tgid8", "tgiv8", "tgiu8"; + clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>; + + counter { + compatible = "renesas,rz-mtu3-counter"; + }; + + pwm { + compatible = "renesas,rz-mtu3-pwm"; + #pwm-cells = <2>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pwm/renesas,rz-mtu3-pwm.yaml b/Documentation/devicetree/bindings/pwm/renesas,rz-mtu3-pwm.yaml new file mode 100644 index 000000000000..29d7d0fdf7f2 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/renesas,rz-mtu3-pwm.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/renesas,rz-mtu3-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PWM driver for the RZ/G2L multi-function timer pulse unit 3 (MTU3a) + +maintainers: + - Biju Das + +description: | + This module is part of the RZ/G2L MTU3a multi-function device. For more + details see ../mfd/renesas,rz-mtu3.yaml. + + The module supports PWM mode{1,2}, Reset-synchronized PWM mode and + complementary PWM mode{1,2,3}. + + In complementary PWM mode, six positive-phase and six negative-phase PWM + waveforms (12 phases in total) with dead time can be output by + combining MTU{3,4} and MTU{6,7}. + + The pwm channels corresponding to each hardware channels. + 0 - MTU0.MTIOC0A PWM mode 1 + 1 - MTU0.MTIOC0C PWM mode 1 + 2 - MTU1.MTIOC1A PWM mode 1 + 3 - MTU2.MTIOC2A PWM mode 1 + 4 - MTU3.MTIOC3A PWM mode 1 + 5 - MTU3.MTIOC3C PWM mode 1 + 6 - MTU4.MTIOC4A PWM mode 1 + 7 - MTU4.MTIOC4C PWM mode 1 + 8 - MTU6.MTIOC6A PWM mode 1 + 9 - MTU6.MTIOC6C PWM mode 1 + 10 - MTU7.MTIOC7A PWM mode 1 + 11 - MTU7.MTIOC7C PWM mode 1 + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: renesas,rz-mtu3-pwm + + "#pwm-cells": + const: 2 + +required: + - compatible + +additionalProperties: false