From patchwork Wed Mar 19 13:22:55 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Lothar_Wa=C3=9Fmann?= X-Patchwork-Id: 331724 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 05CB62C00A2 for ; Thu, 20 Mar 2014 00:25:12 +1100 (EST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965085AbaCSNYc (ORCPT ); Wed, 19 Mar 2014 09:24:32 -0400 Received: from mail.karo-electronics.de ([81.173.242.67]:50171 "EHLO mail.karo-electronics.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965084AbaCSNY3 (ORCPT ); Wed, 19 Mar 2014 09:24:29 -0400 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= To: Thierry Reding , linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org, =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Subject: [PATCHv3 3/3] pwm: imx: support output polarity inversion Date: Wed, 19 Mar 2014 14:22:55 +0100 Message-Id: <1395235375-12925-4-git-send-email-LW@KARO-electronics.de> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1395235375-12925-1-git-send-email-LW@KARO-electronics.de> References: <1395235375-12925-1-git-send-email-LW@KARO-electronics.de> MIME-Version: 1.0 Sender: linux-pwm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pwm@vger.kernel.org The i.MX pwm unit on i.MX27 and newer SoCs provides a configurable output polarity. This patch adds support to utilize this feature where available. Signed-off-by: Lothar Waßmann --- drivers/pwm/pwm-imx.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c index 52aac5e..a43410a 100644 --- a/drivers/pwm/pwm-imx.c +++ b/drivers/pwm/pwm-imx.c @@ -138,6 +138,8 @@ static int imx_pwm_config_v2(struct pwm_chip *chip, if (test_bit(PWMF_ENABLED, &pwm->flags)) cr |= MX3_PWMCR_EN; + if (pwm->polarity == PWM_POLARITY_INVERSED) + cr |= MX3_PWMCR_POUTC; writel(cr, imx->mmio_base + MX3_PWMCR); @@ -156,6 +158,11 @@ static void imx_pwm_set_enable_v2(struct pwm_chip *chip, bool enable) else val &= ~MX3_PWMCR_EN; + if (chip->pwms[0].polarity == PWM_POLARITY_INVERSED) + val |= MX3_PWMCR_POUTC; + else + val &= ~MX3_PWMCR_POUTC; + writel(val, imx->mmio_base + MX3_PWMCR); } @@ -199,6 +206,17 @@ static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) clk_disable_unprepare(imx->clk_per); } +static int imx_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, + enum pwm_polarity polarity) +{ + struct imx_chip *imx = to_imx_chip(chip); + + dev_dbg(imx->chip.dev, "%s: polarity set to %s\n", __func__, + polarity == PWM_POLARITY_INVERSED ? "inverted" : "normal"); + + return 0; +} + static struct pwm_ops imx_pwm_ops = { .enable = imx_pwm_enable, .disable = imx_pwm_disable, @@ -210,6 +228,7 @@ struct imx_pwm_data { int (*config)(struct pwm_chip *chip, struct pwm_device *pwm, int duty_ns, int period_ns); void (*set_enable)(struct pwm_chip *chip, bool enable); + unsigned output_polarity:1; }; static struct imx_pwm_data imx_pwm_data_v1 = { @@ -220,6 +239,7 @@ static struct imx_pwm_data imx_pwm_data_v1 = { static struct imx_pwm_data imx_pwm_data_v2 = { .config = imx_pwm_config_v2, .set_enable = imx_pwm_set_enable_v2, + .output_polarity = 1, }; static const struct of_device_id imx_pwm_dt_ids[] = { @@ -272,6 +292,11 @@ static int imx_pwm_probe(struct platform_device *pdev) return PTR_ERR(imx->mmio_base); data = of_id->data; + if (data->output_polarity) { + dev_dbg(&pdev->dev, "PWM supports output inversion\n"); + imx_pwm_ops.set_polarity = imx_pwm_set_polarity; + } + imx->config = data->config; imx->set_enable = data->set_enable;