diff mbox series

[v5,6/7] arm64: dts: ti: k3-am65-main: Add VMAP registers to PCI root complexes

Message ID e62e520c4611ba987478fe60c3c24739b334d8e5.1725816753.git.jan.kiszka@siemens.com
State New
Headers show
Series soc: ti: Add and use PVU on K3-AM65 for DMA isolation | expand

Commit Message

Jan Kiszka Sept. 8, 2024, 5:32 p.m. UTC 
From: Jan Kiszka <jan.kiszka@siemens.com>

Rewrap the long lines at this chance.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 2582dad68dff..08a11ab38fbd 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -895,8 +895,13 @@  main_gpio1: gpio@601000 {
 
 	pcie0_rc: pcie@5500000 {
 		compatible = "ti,am654-pcie-rc";
-		reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
-		reg-names = "app", "dbics", "config", "atu";
+		reg = <0x0 0x5500000 0x0 0x1000>,
+		      <0x0 0x5501000 0x0 0x1000>,
+		      <0x0 0x10000000 0x0 0x2000>,
+		      <0x0 0x5506000 0x0 0x1000>,
+		      <0x0 0x2900000 0x0 0x1000>,
+		      <0x0 0x2908000 0x0 0x1000>;
+		reg-names = "app", "dbics", "config", "atu", "vmap_lp", "vmap_hp";
 		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -916,8 +921,13 @@  pcie0_rc: pcie@5500000 {
 
 	pcie1_rc: pcie@5600000 {
 		compatible = "ti,am654-pcie-rc";
-		reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
-		reg-names = "app", "dbics", "config", "atu";
+		reg = <0x0 0x5600000 0x0 0x1000>,
+		      <0x0 0x5601000 0x0 0x1000>,
+		      <0x0 0x18000000 0x0 0x2000>,
+		      <0x0 0x5606000 0x0 0x1000>,
+		      <0x0 0x2910000 0x0 0x1000>,
+		      <0x0 0x2918000 0x0 0x1000>;
+		reg-names = "app", "dbics", "config", "atu", "vmap_lp", "vmap_hp";
 		power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
 		#address-cells = <3>;
 		#size-cells = <2>;