diff mbox series

[v9,07/14] PCI: Export `pcie_retrain_link' for use outside ASPM

Message ID alpine.DEB.2.21.2306110229010.64925@angie.orcam.me.uk
State New
Headers show
Series pci: Work around ASMedia ASM2824 PCIe link training failures | expand

Commit Message

Maciej W. Rozycki June 11, 2023, 5:19 p.m. UTC
Export `pcie_retrain_link' for link retrain needs outside ASPM.  There 
is no functional change at this point, but `struct pcie_link_state' is 
local to ASPM and not used within `pcie_retrain_link' other than to get 
at the associated PCI device, so change the operand and adjust the lone 
call site accordingly.  Document the interface.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
---
There's a missing full stop added in a comment in the course of the move, 
not worth mentioning in the change description IMHO and not worth its own 
change either.  This comment will go away in a subsequent change anyway.

New change in v9.
---
 drivers/pci/pci.c       |   36 ++++++++++++++++++++++++++++++++++++
 drivers/pci/pci.h       |    1 +
 drivers/pci/pcie/aspm.c |   32 +-------------------------------
 3 files changed, 38 insertions(+), 31 deletions(-)

linux-pcie-retrain-link-export.diff
diff mbox series

Patch

Index: linux-macro/drivers/pci/pci.c
===================================================================
--- linux-macro.orig/drivers/pci/pci.c
+++ linux-macro/drivers/pci/pci.c
@@ -4912,6 +4912,42 @@  bool pcie_wait_for_link(struct pci_dev *
 	return pcie_wait_for_link_delay(pdev, active, 100);
 }
 
+/**
+ * pcie_retrain_link - Request a link retrain and wait for it to complete
+ * @pdev: Device whose link to retrain.
+ *
+ * Return TRUE if successful, or FALSE if training has not completed
+ * within PCIE_LINK_RETRAIN_TIMEOUT_MS milliseconds.
+ */
+bool pcie_retrain_link(struct pci_dev *pdev)
+{
+	unsigned long end_jiffies;
+	u16 reg16;
+
+	pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &reg16);
+	reg16 |= PCI_EXP_LNKCTL_RL;
+	pcie_capability_write_word(pdev, PCI_EXP_LNKCTL, reg16);
+	if (pdev->clear_retrain_link) {
+		/*
+		 * Due to an erratum in some devices the Retrain Link bit
+		 * needs to be cleared again manually to allow the link
+		 * training to succeed.
+		 */
+		reg16 &= ~PCI_EXP_LNKCTL_RL;
+		pcie_capability_write_word(pdev, PCI_EXP_LNKCTL, reg16);
+	}
+
+	/* Wait for link training end. Break out after waiting for timeout. */
+	end_jiffies = jiffies + msecs_to_jiffies(PCIE_LINK_RETRAIN_TIMEOUT_MS);
+	do {
+		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &reg16);
+		if (!(reg16 & PCI_EXP_LNKSTA_LT))
+			break;
+		msleep(1);
+	} while (time_before(jiffies, end_jiffies));
+	return !(reg16 & PCI_EXP_LNKSTA_LT);
+}
+
 /*
  * Find maximum D3cold delay required by all the devices on the bus.  The
  * spec says 100 ms, but firmware can lower it and we allow drivers to
Index: linux-macro/drivers/pci/pci.h
===================================================================
--- linux-macro.orig/drivers/pci/pci.h
+++ linux-macro/drivers/pci/pci.h
@@ -561,6 +561,7 @@  pci_ers_result_t pcie_do_recovery(struct
 		pci_ers_result_t (*reset_subordinates)(struct pci_dev *pdev));
 
 bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
+bool pcie_retrain_link(struct pci_dev *pdev);
 #ifdef CONFIG_PCIEASPM
 void pcie_aspm_init_link_state(struct pci_dev *pdev);
 void pcie_aspm_exit_link_state(struct pci_dev *pdev);
Index: linux-macro/drivers/pci/pcie/aspm.c
===================================================================
--- linux-macro.orig/drivers/pci/pcie/aspm.c
+++ linux-macro/drivers/pci/pcie/aspm.c
@@ -191,36 +191,6 @@  static void pcie_clkpm_cap_init(struct p
 	link->clkpm_disable = blacklist ? 1 : 0;
 }
 
-static bool pcie_retrain_link(struct pcie_link_state *link)
-{
-	struct pci_dev *parent = link->pdev;
-	unsigned long end_jiffies;
-	u16 reg16;
-
-	pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &reg16);
-	reg16 |= PCI_EXP_LNKCTL_RL;
-	pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
-	if (parent->clear_retrain_link) {
-		/*
-		 * Due to an erratum in some devices the Retrain Link bit
-		 * needs to be cleared again manually to allow the link
-		 * training to succeed.
-		 */
-		reg16 &= ~PCI_EXP_LNKCTL_RL;
-		pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
-	}
-
-	/* Wait for link training end. Break out after waiting for timeout */
-	end_jiffies = jiffies + msecs_to_jiffies(PCIE_LINK_RETRAIN_TIMEOUT_MS);
-	do {
-		pcie_capability_read_word(parent, PCI_EXP_LNKSTA, &reg16);
-		if (!(reg16 & PCI_EXP_LNKSTA_LT))
-			break;
-		msleep(1);
-	} while (time_before(jiffies, end_jiffies));
-	return !(reg16 & PCI_EXP_LNKSTA_LT);
-}
-
 /*
  * pcie_aspm_configure_common_clock: check if the 2 ends of a link
  *   could use common clock. If they are, configure them to use the
@@ -287,7 +257,7 @@  static void pcie_aspm_configure_common_c
 		reg16 &= ~PCI_EXP_LNKCTL_CCC;
 	pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
 
-	if (pcie_retrain_link(link))
+	if (pcie_retrain_link(link->pdev))
 		return;
 
 	/* Training failed. Restore common clock configurations */