Message ID | 98be2b2cfd6dfb9cdfed95da5fe8cde0a96ce37e.1529595907.git.gustavo.pimentel@synopsys.com |
---|---|
State | Superseded |
Delegated to: | Lorenzo Pieralisi |
Headers | show |
Series | Add MSI-X support on pcitest tool | expand |
Hi, On Thursday 21 June 2018 09:31 PM, Gustavo Pimentel wrote: > Add new driver parameter to allow interruption type selection. > > Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> > --- > Change v2->v3: > - New patch file created base on the previous patch > "misc: pci_endpoint_test: Add MSI-X support" patch file following > Kishon's suggestion. > Change v3->v4: > - Rebased to Lorenzo's master branch v4.18-rc1. > Change v4->v5: > - Nothing changed, just to follow the patch set version. > Change v5->v6: > - Nothing changed, just to follow the patch set version. > > drivers/misc/pci_endpoint_test.c | 30 +++++++++++++++++++++--------- > 1 file changed, 21 insertions(+), 9 deletions(-) > > diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c > index 35fbfbd..4d2c9cb 100644 > --- a/drivers/misc/pci_endpoint_test.c > +++ b/drivers/misc/pci_endpoint_test.c > @@ -82,6 +82,10 @@ static bool no_msi; > module_param(no_msi, bool, 0444); > MODULE_PARM_DESC(no_msi, "Disable MSI interrupt in pci_endpoint_test"); > > +static int irq_type = IRQ_TYPE_MSI; > +module_param(irq_type, int, 0444); > +MODULE_PARM_DESC(irq_type, "IRQ mode selection in pci_endpoint_test (0 - Legacy, 1 - MSI)"); > + > enum pci_barno { > BAR_0, > BAR_1, > @@ -108,7 +112,7 @@ struct pci_endpoint_test { > struct pci_endpoint_test_data { > enum pci_barno test_reg_bar; > size_t alignment; > - bool no_msi; > + int irq_type; > }; > > static inline u32 pci_endpoint_test_readl(struct pci_endpoint_test *test, > @@ -291,8 +295,7 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size) > pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, > size); > > - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, > - no_msi ? IRQ_TYPE_LEGACY : IRQ_TYPE_MSI); > + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type); > pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1); > pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, > COMMAND_COPY); > @@ -361,8 +364,7 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size) > > pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size); > > - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, > - no_msi ? IRQ_TYPE_LEGACY : IRQ_TYPE_MSI); > + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type); > pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1); > pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, > COMMAND_READ); > @@ -419,8 +421,7 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t size) > > pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size); > > - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, > - no_msi ? IRQ_TYPE_LEGACY : IRQ_TYPE_MSI); > + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type); > pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1); > pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, > COMMAND_WRITE); > @@ -505,11 +506,14 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev, > test->alignment = 0; > test->pdev = pdev; > > + if (no_msi) > + irq_type = IRQ_TYPE_LEGACY; > + > data = (struct pci_endpoint_test_data *)ent->driver_data; > if (data) { > test_reg_bar = data->test_reg_bar; > test->alignment = data->alignment; > - no_msi = data->no_msi; > + irq_type = data->irq_type; > } > > init_completion(&test->irq_raised); > @@ -529,13 +533,21 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev, > > pci_set_master(pdev); > > - if (!no_msi) { > + switch (irq_type) { > + case IRQ_TYPE_LEGACY: > + irq = 0; Looks like this is not required. irq variable is used only for MSI irq. Thanks Kishon
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index 35fbfbd..4d2c9cb 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -82,6 +82,10 @@ static bool no_msi; module_param(no_msi, bool, 0444); MODULE_PARM_DESC(no_msi, "Disable MSI interrupt in pci_endpoint_test"); +static int irq_type = IRQ_TYPE_MSI; +module_param(irq_type, int, 0444); +MODULE_PARM_DESC(irq_type, "IRQ mode selection in pci_endpoint_test (0 - Legacy, 1 - MSI)"); + enum pci_barno { BAR_0, BAR_1, @@ -108,7 +112,7 @@ struct pci_endpoint_test { struct pci_endpoint_test_data { enum pci_barno test_reg_bar; size_t alignment; - bool no_msi; + int irq_type; }; static inline u32 pci_endpoint_test_readl(struct pci_endpoint_test *test, @@ -291,8 +295,7 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size) pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size); - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, - no_msi ? IRQ_TYPE_LEGACY : IRQ_TYPE_MSI); + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type); pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1); pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, COMMAND_COPY); @@ -361,8 +364,7 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size) pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size); - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, - no_msi ? IRQ_TYPE_LEGACY : IRQ_TYPE_MSI); + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type); pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1); pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, COMMAND_READ); @@ -419,8 +421,7 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t size) pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size); - pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, - no_msi ? IRQ_TYPE_LEGACY : IRQ_TYPE_MSI); + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type); pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1); pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND, COMMAND_WRITE); @@ -505,11 +506,14 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev, test->alignment = 0; test->pdev = pdev; + if (no_msi) + irq_type = IRQ_TYPE_LEGACY; + data = (struct pci_endpoint_test_data *)ent->driver_data; if (data) { test_reg_bar = data->test_reg_bar; test->alignment = data->alignment; - no_msi = data->no_msi; + irq_type = data->irq_type; } init_completion(&test->irq_raised); @@ -529,13 +533,21 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev, pci_set_master(pdev); - if (!no_msi) { + switch (irq_type) { + case IRQ_TYPE_LEGACY: + irq = 0; + break; + case IRQ_TYPE_MSI: irq = pci_alloc_irq_vectors(pdev, 1, 32, PCI_IRQ_MSI); if (irq < 0) dev_err(dev, "Failed to get MSI interrupts\n"); test->num_irqs = irq; + break; + default: + dev_err(dev, "Invalid IRQ type selected\n"); } + err = devm_request_irq(dev, pdev->irq, pci_endpoint_test_irqhandler, IRQF_SHARED, DRV_MODULE_NAME, test); if (err) {
Add new driver parameter to allow interruption type selection. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> --- Change v2->v3: - New patch file created base on the previous patch "misc: pci_endpoint_test: Add MSI-X support" patch file following Kishon's suggestion. Change v3->v4: - Rebased to Lorenzo's master branch v4.18-rc1. Change v4->v5: - Nothing changed, just to follow the patch set version. Change v5->v6: - Nothing changed, just to follow the patch set version. drivers/misc/pci_endpoint_test.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-)