diff mbox series

[v8,2/5] dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt

Message ID 20241101030902.579789-3-quic_qianyu@quicinc.com
State New
Headers show
Series Add support for PCIe3 on x1e80100 | expand

Commit Message

Qiang Yu Nov. 1, 2024, 3:08 a.m. UTC 
Qcom PCIe RC controllers are capable of generating 'global' SPI interrupt
to the host CPU. This interrupt can be used by the device driver to handle
PCIe link specific events such as Link up and Link down, which give the
driver a chance to start bus enumeration on its own when link is up and
initiate link training if link goes to a bad state. The PCIe driver can
still work without this interrupt but it will provide a nice user
experience when device gets plugged and removed.

Hence, document it in the binding along with the existing MSI interrupts.
Global interrupt is parsed as optional in driver, so adding it in bindings
will not break the ABI.

Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pci/qcom,pcie-x1e80100.yaml      | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
index a9db0a231563..257068a18264 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
@@ -47,9 +47,10 @@  properties:
 
   interrupts:
     minItems: 8
-    maxItems: 8
+    maxItems: 9
 
   interrupt-names:
+    minItems: 8
     items:
       - const: msi0
       - const: msi1
@@ -59,6 +60,7 @@  properties:
       - const: msi5
       - const: msi6
       - const: msi7
+      - const: global
 
   resets:
     minItems: 1
@@ -130,9 +132,10 @@  examples:
                          <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
             interrupt-names = "msi0", "msi1", "msi2", "msi3",
-                              "msi4", "msi5", "msi6", "msi7";
+                              "msi4", "msi5", "msi6", "msi7", "global";
             #interrupt-cells = <1>;
             interrupt-map-mask = <0 0 0 0x7>;
             interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */