Message ID | 20240722-sc7280-pcie-interrupts-v2-1-a5414d3dbc64@linaro.org |
---|---|
State | New |
Headers | show |
Series | [v2] dt-bindings: PCI: qcom,pcie-sc7280: specify eight interrupts | expand |
Hello, > In the previous commit to this binding, > commit 756485bfbb85 ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to dedicated schema"), > the binding was changed to specify one interrupt, as the device tree at > that moment in time did not describe the hardware fully. > > The device tree for sc7280 now specifies eight interrupts, due to > commit b8ba66b40da3 ("arm64: dts: qcom: sc7280: Add additional MSI interrupts"). > > As a result, change the bindings to reflect this. Applied to dt-bindings, thank you! [1/1] dt-bindings: PCI: qcom,pcie-sc7280: Update bindings adding eight interrupts https://git.kernel.org/pci/pci/c/364cfd8a56c0 Krzysztof
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml index 634da24ec3ed..5cf1f9165301 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml @@ -53,11 +53,19 @@ properties: - const: aggre1 # Aggre NoC PCIe1 AXI clock interrupts: - maxItems: 1 + minItems: 8 + maxItems: 8 interrupt-names: items: - - const: msi + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 resets: maxItems: 1 @@ -137,8 +145,16 @@ examples: dma-coherent; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,