| Message ID | 20220422211002.2012070-8-dmitry.baryshkov@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | dt-bindings: YAMLify pci/qcom,pcie schema | expand |
On 22/04/2022 23:10, Dmitry Baryshkov wrote: > Replace deprecated perst-gpio properties with up-to-date perst-gpios > in the Qualcomm device trees. > You also replaced wake-gpio in one case. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index f623db8451f1..9fb33850e46c 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -497,20 +497,20 @@ config { &pcie0 { status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&wlan_en>; vdda-supply = <&vreg_l28a_0p925>; }; &pcie1 { status = "okay"; - perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>; vdda-supply = <&vreg_l28a_0p925>; }; &pcie2 { status = "okay"; - perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; vdda-supply = <&vreg_l28a_0p925>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index b5e1eaa367bf..2d5ee337054c 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -54,12 +54,12 @@ &blsp1_uart5 { &pcie0 { status = "okay"; - perst-gpio = <&tlmm 61 0x1>; + perst-gpios = <&tlmm 61 0x1>; }; &pcie1 { status = "okay"; - perst-gpio = <&tlmm 58 0x1>; + perst-gpios = <&tlmm 58 0x1>; }; &pcie_phy0 { diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi index 07e670829676..3c0ac747de0e 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi @@ -44,12 +44,12 @@ &blsp1_uart5 { &pcie0 { status = "ok"; - perst-gpio = <&tlmm 58 0x1>; + perst-gpios = <&tlmm 58 0x1>; }; &pcie1 { status = "ok"; - perst-gpio = <&tlmm 61 0x1>; + perst-gpios = <&tlmm 61 0x1>; }; &pcie_phy0 { diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi index 3bb50cecd62d..b90000223d69 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi @@ -195,8 +195,8 @@ &mmcc { &pcie0 { status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; vddpe-3v3-supply = <&wlan_en>; vdda-supply = <&pm8994_l28>; }; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index a80c578484ba..b067b9f95189 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -99,7 +99,7 @@ pms405_s3: s3 { &pcie { status = "okay"; - perst-gpio = <&tlmm 43 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&perst_state>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index dc17f2079695..461ba68fd939 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -362,7 +362,7 @@ &pcie1 { pinctrl-names = "default"; pinctrl-0 = <&pcie1_clkreq_n>, <&ssd_rst_l>, <&pe_wake_odl>; - perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&pp3300_ssd>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index ecbf2b89d896..8abf8077be11 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -240,7 +240,7 @@ &ipa { &pcie1 { status = "okay"; - perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&nvme_3v3_regulator>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 28fe45c5d516..1aadd5504631 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -502,7 +502,7 @@ &mss_pil { &pcie0 { status = "okay"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>; vddpe-3v3-supply = <&pcie0_3p3v_dual>; @@ -520,7 +520,7 @@ &pcie0_phy { &pcie1 { status = "okay"; - perst-gpio = <&tlmm 102 GPIO_ACTIVE_LOW>; + perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>;
Replace deprecated perst-gpio properties with up-to-date perst-gpios in the Qualcomm device trees. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 6 +++--- arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 4 ++-- arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 2 +- arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 2 +- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 2 +- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++-- 8 files changed, 14 insertions(+), 14 deletions(-)