From patchwork Mon Apr 11 18:58:59 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Pali_Roh=C3=A1r?= X-Patchwork-Id: 1615899 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=kernel.org header.i=@kernel.org header.a=rsa-sha256 header.s=k20201202 header.b=MEN0upl3; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4KcdVx6y9fz9sDX for ; Tue, 12 Apr 2022 05:01:29 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1349303AbiDKTDj (ORCPT ); Mon, 11 Apr 2022 15:03:39 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58788 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1349300AbiDKTDi (ORCPT ); Mon, 11 Apr 2022 15:03:38 -0400 Received: from ams.source.kernel.org (ams.source.kernel.org [145.40.68.75]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9FF2E32074; Mon, 11 Apr 2022 12:01:22 -0700 (PDT) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id 49B92B8186E; Mon, 11 Apr 2022 19:01:21 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id B67E4C385A3; Mon, 11 Apr 2022 19:01:19 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1649703680; bh=5YHL3Hjh0AaP8CgfCJ3QGpsdMmryF5kIFHovdhn9HfY=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=MEN0upl3gefvglj04rR/Z42Ixd7YZPRTqaUyQbzo6QWV4KiRlzDCAYhbF+nuIUaYq NCDV8edSYRVWsaNmFpcHnm+itf5BFO4m2qauSI2CTZLYnxTWAbBIZt6lzdsxORoT+b 2WWOHd3Sab8tvK5yFv2uA2FdZtVqWubDV6VFaDHXLCSzwcuFHUpErMPIzybLXoVLNd UJNRt5vDAZ/u6nVWwgmuPkRONCXgigpqAcvDzT7DwPPOtrMsiMnq4TaBllTmzo1QJ4 94UIboeWyitqPRZXdEIXxV6/6gopUr9C64eGMXWmpUD5BYUXS/eYSr5wcst7A0WaSo km/K4otPbl5PA== Received: by pali.im (Postfix) id 6D882947; Mon, 11 Apr 2022 21:01:19 +0200 (CEST) From: =?utf-8?q?Pali_Roh=C3=A1r?= To: Lorenzo Pieralisi , Bjorn Helgaas , Rob Herring , Andrew Lunn , Thomas Petazzoni , =?utf-8?q?Krzysztof_Wilczy?= =?utf-8?q?=C5=84ski?= , =?utf-8?q?Marek_Beh=C3=BAn?= , Russell King Cc: linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v4 4/4] PCI: mvebu: Add support for sending Set_Slot_Power_Limit message Date: Mon, 11 Apr 2022 20:58:59 +0200 Message-Id: <20220411185859.32722-5-pali@kernel.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20220411185859.32722-1-pali@kernel.org> References: <20220411185859.32722-1-pali@kernel.org> MIME-Version: 1.0 X-Spam-Status: No, score=-7.1 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_HI, SPF_HELO_NONE,SPF_PASS,T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org If DT supplies the 'slot-power-limit-milliwatt' property, program the value in the Slot Power Limit in the Slot Capabilities register and program the Root Port to send a Set_Slot_Power_Limit Message when the Link transitions to DL_Up. Signed-off-by: Pali Rohár Reviewed-by: Rob Herring --- Changes in v2: * Fix handling of slot power limit with scale x1.0 (0x00 value) * Use FIELD_PREP instead of _SHIFT macros * Changed commit message to Bjorn's suggestion * Changed comments in the code to match PCIe spec * Preserve user settings of PCI_EXP_SLTCTL_ASPL_DISABLE bit --- drivers/pci/controller/pci-mvebu.c | 96 ++++++++++++++++++++++++++++-- 1 file changed, 91 insertions(+), 5 deletions(-) diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c index a75d2b9196f9..26ae7c29fece 100644 --- a/drivers/pci/controller/pci-mvebu.c +++ b/drivers/pci/controller/pci-mvebu.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include @@ -66,6 +67,12 @@ #define PCIE_STAT_BUS 0xff00 #define PCIE_STAT_DEV 0x1f0000 #define PCIE_STAT_LINK_DOWN BIT(0) +#define PCIE_SSPL_OFF 0x1a0c +#define PCIE_SSPL_VALUE_SHIFT 0 +#define PCIE_SSPL_VALUE_MASK GENMASK(7, 0) +#define PCIE_SSPL_SCALE_SHIFT 8 +#define PCIE_SSPL_SCALE_MASK GENMASK(9, 8) +#define PCIE_SSPL_ENABLE BIT(16) #define PCIE_RC_RTSTA 0x1a14 #define PCIE_DEBUG_CTRL 0x1a60 #define PCIE_DEBUG_SOFT_RESET BIT(20) @@ -111,6 +118,8 @@ struct mvebu_pcie_port { struct mvebu_pcie_window iowin; u32 saved_pcie_stat; struct resource regs; + u8 slot_power_limit_value; + u8 slot_power_limit_scale; struct irq_domain *intx_irq_domain; raw_spinlock_t irq_lock; int intx_irq; @@ -239,7 +248,7 @@ static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port) static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) { - u32 ctrl, lnkcap, cmd, dev_rev, unmask; + u32 ctrl, lnkcap, cmd, dev_rev, unmask, sspl; /* Setup PCIe controller to Root Complex mode. */ ctrl = mvebu_readl(port, PCIE_CTRL_OFF); @@ -292,6 +301,20 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) /* Point PCIe unit MBUS decode windows to DRAM space. */ mvebu_pcie_setup_wins(port); + /* + * Program Root Port to automatically send Set_Slot_Power_Limit + * PCIe Message when changing status from Dl_Down to Dl_Up and valid + * slot power limit was specified. + */ + sspl = mvebu_readl(port, PCIE_SSPL_OFF); + sspl &= ~(PCIE_SSPL_VALUE_MASK | PCIE_SSPL_SCALE_MASK | PCIE_SSPL_ENABLE); + if (port->slot_power_limit_value) { + sspl |= port->slot_power_limit_value << PCIE_SSPL_VALUE_SHIFT; + sspl |= port->slot_power_limit_scale << PCIE_SSPL_SCALE_SHIFT; + sspl |= PCIE_SSPL_ENABLE; + } + mvebu_writel(port, sspl, PCIE_SSPL_OFF); + /* Mask all interrupt sources. */ mvebu_writel(port, ~PCIE_INT_ALL_MASK, PCIE_INT_UNMASK_OFF); @@ -628,9 +651,23 @@ mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge, (PCI_EXP_LNKSTA_DLLLA << 16) : 0); break; - case PCI_EXP_SLTCTL: - *value = PCI_EXP_SLTSTA_PDS << 16; + case PCI_EXP_SLTCTL: { + u16 slotsta = le16_to_cpu(bridge->pcie_conf.slotsta); + u32 val = 0; + /* + * When slot power limit was not specified in DT then + * ASPL_DISABLE bit is stored only in emulated config space. + * Otherwise reflect status of PCIE_SSPL_ENABLE bit in HW. + */ + if (!port->slot_power_limit_value) + val |= slotctl & PCI_EXP_SLTCTL_ASPL_DISABLE; + else if (!(mvebu_readl(port, PCIE_SSPL_OFF) & PCIE_SSPL_ENABLE)) + val |= PCI_EXP_SLTCTL_ASPL_DISABLE; + /* This callback is 32-bit and in high bits is slot status. */ + val |= slotsta << 16; + *value = val; break; + } case PCI_EXP_RTSTA: *value = mvebu_readl(port, PCIE_RC_RTSTA); @@ -774,6 +811,22 @@ mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge, mvebu_writel(port, new, PCIE_CAP_PCIEXP + PCI_EXP_LNKCTL); break; + case PCI_EXP_SLTCTL: + /* + * Allow to change PCIE_SSPL_ENABLE bit only when slot power + * limit was specified in DT and configured into HW. + */ + if ((mask & PCI_EXP_SLTCTL_ASPL_DISABLE) && + port->slot_power_limit_value) { + u32 sspl = mvebu_readl(port, PCIE_SSPL_OFF); + if (new & PCI_EXP_SLTCTL_ASPL_DISABLE) + sspl &= ~PCIE_SSPL_ENABLE; + else + sspl |= PCIE_SSPL_ENABLE; + mvebu_writel(port, sspl, PCIE_SSPL_OFF); + } + break; + case PCI_EXP_RTSTA: /* * PME Status bit in Root Status Register (PCIE_RC_RTSTA) @@ -868,8 +921,26 @@ static int mvebu_pci_bridge_emul_init(struct mvebu_pcie_port *port) /* * Older mvebu hardware provides PCIe Capability structure only in * version 1. New hardware provides it in version 2. + * Enable slot support which is emulated. */ - bridge->pcie_conf.cap = cpu_to_le16(pcie_cap_ver); + bridge->pcie_conf.cap = cpu_to_le16(pcie_cap_ver | PCI_EXP_FLAGS_SLOT); + + /* + * Set Presence Detect State bit permanently as there is no support for + * unplugging PCIe card from the slot. Assume that PCIe card is always + * connected in slot. + * + * Set physical slot number to port+1 as mvebu ports are indexed from + * zero and zero value is reserved for ports within the same silicon + * as Root Port which is not mvebu case. + * + * Also set correct slot power limit. + */ + bridge->pcie_conf.slotcap = cpu_to_le32( + FIELD_PREP(PCI_EXP_SLTCAP_SPLV, port->slot_power_limit_value) | + FIELD_PREP(PCI_EXP_SLTCAP_SPLS, port->slot_power_limit_scale) | + FIELD_PREP(PCI_EXP_SLTCAP_PSN, port->port+1)); + bridge->pcie_conf.slotsta = cpu_to_le16(PCI_EXP_SLTSTA_PDS); bridge->subsystem_vendor_id = ssdev_id & 0xffff; bridge->subsystem_id = ssdev_id >> 16; @@ -1191,6 +1262,7 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie, { struct device *dev = &pcie->pdev->dev; enum of_gpio_flags flags; + u32 slot_power_limit; int reset_gpio, ret; u32 num_lanes; @@ -1291,6 +1363,15 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie, port->reset_gpio = gpio_to_desc(reset_gpio); } + slot_power_limit = of_pci_get_slot_power_limit(child, + &port->slot_power_limit_value, + &port->slot_power_limit_scale); + if (slot_power_limit) + dev_info(dev, "%s: Slot power limit %u.%uW\n", + port->name, + slot_power_limit / 1000, + (slot_power_limit / 100) % 10); + port->clk = of_clk_get_by_name(child, NULL); if (IS_ERR(port->clk)) { dev_err(dev, "%s: cannot get clock\n", port->name); @@ -1587,7 +1668,7 @@ static int mvebu_pcie_remove(struct platform_device *pdev) { struct mvebu_pcie *pcie = platform_get_drvdata(pdev); struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); - u32 cmd; + u32 cmd, sspl; int i; /* Remove PCI bus with all devices. */ @@ -1624,6 +1705,11 @@ static int mvebu_pcie_remove(struct platform_device *pdev) /* Free config space for emulated root bridge. */ pci_bridge_emul_cleanup(&port->bridge); + /* Disable sending Set_Slot_Power_Limit PCIe Message. */ + sspl = mvebu_readl(port, PCIE_SSPL_OFF); + sspl &= ~(PCIE_SSPL_VALUE_MASK | PCIE_SSPL_SCALE_MASK | PCIE_SSPL_ENABLE); + mvebu_writel(port, sspl, PCIE_SSPL_OFF); + /* Disable and clear BARs and windows. */ mvebu_pcie_disable_wins(port);